Loading
Loading…
Loading…
Tender Value
₹94.3 L
EMD Value
₹1.9 L
Closing Date
2 Jan 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
Above/Below/Par
ELECTRICAL
15 conditions · 3 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where : V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The contractor should have valid electrical contractor license issued by government. Note: The submitted/uploaded license must be valid on the date of tender opening to consider as eligible offer.
Technical Eligibility Criteria: The tenderer must have successfully completed or substantially completed any of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender.
Definition of Similar nature of work: "Any Electrical work related to HT/LT installation"
6 conditions · 3 needing a document upload
The Bid Security shall be deposited either in cash through e payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- VIA and shall be valid for a period of 90 days beyond the bid validity period. Required certificate for exemption of Bid security.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Documents to be submitted by tenderers as per status of their firms and are mandatory. These documents are listed below - a)HUF:(i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF.(ii) Annexure V A b)Partnership firm (i) A notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar.(ii) A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm.(iii) Annexure V A . c)Company registered under Companies Act 2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company(ii) A copy of Certificate of Incorporation(iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company.d)LLP (Limited Liability Partnership): (i)A copy of LLP Agreement(ii) A copy of Certificate of Incorporation(iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP.(iv) Annexure V A. e) Registered Society & Registered Trust: (i) A copy of Certificate of Registration(ii) A copy of Memorandum of Association of Society/Trust Deed(iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust.(iv) A copy of Rules & Regulations of the Society. (v) Annexure V A
Tenderer should submit /upload document of Firm details as per 'Annexure-I' of Tender Document
Uploaded scanned copies of applicable document as mentioned above the original instruments (Hard Copy) will be asked later by Sr. DEE /Ajmer office if required.
All the bidders/tenderers should ensure that they are GST Compliant and their quoted tax Structure/rates are as per GST law.
AII Div.: Repair and maintenance of Electrical assets of DRM office building, offices and colony area under jurisdiction of SSE/P/GLO/Ajmer for two years.
DREM-Elect-27-2025-26~NWR
DREM-Elect-27-2025-26
Open
Works - General
24 Months
Ajmer, Rajasthan
₹0
₹1.9 L
2 Jan 2026
11 Dec 2025
19 Dec 2025
311 items across 19 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 40,24,877 | ||
| — | 15600.00 | — | — | ||
| Attending minor complaints i.e. non working of lights, fans, MCB tripping etc as per specification. | — | — | — | 9,04,800 | |
| — | 1200.00 | — | — | ||
| Attending major complaints i.e. related to Short circuit, street light complaints, jumpering, correction of earth leakage, repairing of old cables etc. as per specification. | — | — | — | 1,83,600 | |
| — | 250.00 | — | — | ||
| Supply and testing of fan capacitors capacity 3.15Mfd as per specification. | — | — | — | 5,750 | |
| — | 250.00 | — | — | ||
| Replacement of fan capacitor (NS-1c) in existing fan as per specification. | — | — | — | 2,250 | |
| — | 15000.00 | — | — | ||
| Assembling, fixing, hanging & connection of celling fans, exhaust fans, geyser & all type of fittings as per specification. | — | — | — | 9,00,000 | |
| — | 84.00 | — | — | ||
| Supply & fabricate down rod of suitable size with hole "A" class GI pipe for hanging fan as per specification. | — | — | — | 9,492 | |
| — | 84.00 | — | — | ||
| Supply and fix the rubber reel with nut, bolt, washer & split pin as per specification. | — | — | — | 1,680 | |
| — | 15.00 | — | — | ||
| Rewinding of exhaust fan motor of all size as per specification. | — | — | — | 8,850 | |
| — | 500.00 | — | — | ||
| Making and fixing of chase for 20/25mm dia PVC/MS conduit pipe. Surface of chase shall be made good in all respect and satisfaction of Concern SSE . | — | — | — | 1,500 | |
| — | 300.00 | — | — | ||
| Supply of material & wiring of Point by 1.5sqmm & earth wire by 1.5sqmm PVC insulated, single core, multi-strand FR grade wire (Long point wiring) as per specification. | — | — | — | 98,700 | |
| — | 1200.00 | — | — | ||
| Supply of material & wiring of point by 1.5sqmm & earth wire by 1.5sqmm PVC insulated, single core, multi-strand FR grade wire (Short point wiring) as per specification. | — | — | — | 1,76,400 | |
| — | 3000.00 | — | — | ||
| Supply of material & wiring of sub main by 2.5sqmm & earth wire by 1.5sqmm copper conductor as per specification. | — | — | — | 1,59,000 | |
| — | 2000.00 | — | — | ||
| Supply of material & wiring of Sub main wiring by 4sq mm & earth wire by 2.5 sq mm copper conductor as per specification. | — | — | — | 1,58,000 | |
| — | 200.00 | — | — | ||
| Supply & fix well-seasoned, well-polished & varnished of wooden switch board size of 100X100mm with plane laminated white sun mica sheet on the top and back plank as per specification. | — | — | — | 2,200 | |
| — | 250.00 | — | — | ||
| Supply & fix well-seasoned, well-polished & varnished of wooden switch board size of 175X100mm with plane laminated white sun mica sheet on the top and back plank as per specification. | — | — | — | 25,000 | |
| — | 200.00 | — | — | ||
| Supply & fix well-seasoned, well-polished & varnished of wooden switch board size of 200X250mm with plane laminated white sun mica sheet on the top and back plank as per specification. | — | — | — | 41,800 | |
| — | 200.00 | — | — | ||
| Supply of material & fixing of flush metal box of 2-module with connection used for concealed modular flush metal box wiring as per specification. | — | — | — | 12,600 | |
| — | 200.00 | — | — | ||
| Supply of material & fixing of flush metal box of 4-module with connection used for concealed modular flush metal box wiring as per specification. | — | — | — | 23,600 | |
| — | 150.00 | — | — | ||
| Supply of material & fixing of flush metal box of 8-module with connection used for concealed modular flush metal box wiring as per specification. | — | — | — | 26,100 | |
| — | 200.00 | — | — | ||
| Supply of material & fixing of flush metal box of 12-module with connection used for concealed modular flush metal box wiring as per specification. | — | — | — | 61,200 | |
| — | 200.00 | — | — | ||
| Supply of material & fixing of plate inner and outer 2-module used for concealed modular wiring as per specification. | — | — | — | 25,200 | |
| — | 200.00 | — | — | ||
| Supply of material & fixing of plate inner and outer 4-module used for concealed modular wiring as per specification. | — | — | — | 44,000 | |
| — | 150.00 | — | — | ||
| Supply of material & fixing of plate inner and outer 8-module used for concealed modular wiring as per specification. | — | — | — | 43,650 | |
| — | 200.00 | — | — | ||
| Supply of material & fixing of plate inner and outer 12-module used for concealed modular wiring as per specification. | — | — | — | 63,000 | |
| — | 250.00 | — | — | ||
| Supply, install, test & commissioning of 12 Module PVC box with inner & outer plate used for wiring work as per specification. | — | — | — | 61,500 | |
| — | 250.00 | — | — | ||
| Supply, install, test & commissioning of 08 Module PVC box with inner & outer plate used for wiring work as per specification. | — | — | — | 53,500 | |
| — | 150.00 | — | — | ||
| Supply, install, test & commissioning of 06 Module PVC box with inner & outer plate used for wiring work as per specification. | — | — | — | 23,700 | |
| — | 150.00 | — | — | ||
| Supply, install, test & commissioning of 03 Module PVC box with inner & outer plate used for wiring work as per specification. | — | — | — | 15,300 | |
| — | 2000.00 | — | — | ||
| Supply, install & commission of PVC conduit pipe 20mm dia medium duty with accessories as per specification. | — | — | — | 60,000 | |
| — | 1250.00 | — | — | ||
| Supply, install & commission of PVC conduit pipe 25mm dia medium duty with accessories as per specification. | — | — | — | 43,750 | |
| — | 1500.00 | — | — | ||
| Supply, install & commissioning of PVC casing-caping (20mmX12mm) with accessories as per specification. | — | — | — | 33,000 | |
| — | 500.00 | — | — | ||
| Supply, install & commissioning of PVC casing-caping (25mmX12mm) with accessories as per specification. | — | — | — | 16,000 | |
| — | 500.00 | — | — | ||
| Supply, install, test & commissioning of piano type one way switch 6Amps, ISI marked as per specification. | — | — | — | 11,500 | |
| — | 250.00 | — | — | ||
| Supply, install, test & commissioning of bell push switch 6Amps, ISI marked as per specification. | — | — | — | 10,000 | |
| — | 100.00 | — | — | ||
| Supply, install, test & commissioning of Electronic fan regulator step type, socket size as per specification. | — | — | — | 20,800 | |
| — | 500.00 | — | — | ||
| Supply, install, test & commissioning of 5 pin 6 Amps, DX plug socket as per specification. | — | — | — | 18,500 | |
| — | 800.00 | — | — | ||
| Supply of material & fixing of S.P. Switch 10Amps one way (1-module) used for concealed modular wiring as per specification. | — | — | — | 85,600 | |
| — | 800.00 | — | — | ||
| Supply of material & fixing of 6Amps 5-pin socket (2-module) used for concealed modular wiring as per specification. | — | — | — | 1,29,600 | |
| — | 50.00 | — | — | ||
| Supply of material & fixing of fan regulator 5-step (2-module) used for concealed modular wiring as per specification. | — | — | — | 28,750 | |
| — | 400.00 | — | — | ||
| Supply of material & fixing of 6/16Amps, 6-pin combined shuttered socket (2-module) used for concealed modular wiring as per specification. | — | — | — | 96,800 | |
| — | 400.00 | — | — | ||
| Supply of material & fixing of S.P. switch 16Amps one way (1-module) used for concealed modular wiring as per specification. | — | — | — | 70,400 | |
| — | 200.00 | — | — | ||
| Supply, install, test & commissioning of switch 16 amp, 6 pin, plug socket with suitable size wooden board as per specification. | — | — | — | 37,000 | |
| — | 200.00 | — | — | ||
| Supply and fixing of blank plates (1-Module) used for concealed modular wiring as per specification. | — | — | — | 5,400 | |
| — | 200.00 | — | — | ||
| Supply, fixing & connection of Ceiling rose 3 plate 6 Amps, 240V, ISI marked as per specification. | — | — | — | 7,000 | |
| — | 200.00 | — | — | ||
| Supply, install, test and commissioning of Modular MCB 25Amps "C" series single pole (1-Module) used for concealed wiring as per specification. | — | — | — | 52,200 | |
| — | 2000.00 | — | — | ||
| Supply & connection of electrical assets (as required) by three core 1100V grade PVC insulated & PVC round sheathed copper conductor flexible cable, multistrand, ISI marked size 1.5sqmm as per specification. | — | — | — | 98,000 | |
| — | 500.00 | — | — | ||
| Supply & connection of electrical assets (as required) by three core 1100V grade PVC insulated & PVC round sheathed copper conductor flexible cable, multistrand, ISI marked size 2.5sqmm as per specification. | — | — | — | 46,600 | |
| — | 500.00 | — | — | ||
| Supply & connection of electrical assets (as required) by three core 1100V grade PVC insulated & PVC round sheathed copper conductor flexible cable, multistrand, ISI marked, IS:694:1990 with latest amendments size 24/0.20 ( 0.75 sq mm) as per specification. | — | — | — | 21,605 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TN27-25-26.pdf
ATTACHMENT
SOS.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .