Upgradation of AV and electrical system in CED and CAP conference room, BARC Trombay 400085 and Multipurpose Hall in TSH, Anushaktinagar, Mumbai-400094

Amount

Display monitors

Supply, installation, testing and commissioning of 4K 98 inch Interactive touch screen as per TSS No.-1.1

Supply, installation, testing and commissioning of 75 inch 4K interactive display as per TSS No.-1.2

Supply, installation, testing and commissioning of 4K 65 inch Monitor as per TSS No.-1.3

Supply, installation, testing and commissioning of 4K 32 inch confidence monitor screen with adjustable floor mount as per TSS No.-1.4

Supply, installation, testing and commissioning of 8 in 8 out HDMI Matrix Switcher per TSS No.-1.5

Recording and monitoring equipment

Supply, installation, testing and commissioning of 4K pan tilt camera along with accessories as per TSS No.- 2.1

Audio system

Supply, installation, testing and commissioning of floor mount rack as per TSS No.-3.1

Supply, installation, testing and commissioning of 4 channel 600W per channel amplifier as per TSS No.-3.2

Supply, installation, testing and commissioning of 2 channel 2400W per channel amplifier as per TSS No.-3.3

Supply, installation, testing and commissioning of 2 channel 1250W per channel amplifier as per TSS No.-3.4

Supply, installation, testing and commissioning of 500W coloum line aray speakers as per TSS No.-3.5

Supply, installation, testing and commissioning of passive subwoofer as per TSS No.-3.6

Supply, installation, testing and commissioning of Digital audio mixer per TSS No.-3.7

Supply, installation, testing and commissioning of DSP audio controller with as per TSS No.-3.8

Supply, installation, testing and commissioning of 7 inch touch controller with processor as per TSS No.-3.9

Supply, installation, testing and commissioning of video conference controller as per TSS No.-4

Supply, installation, testing and commissioning of ceiling mount two way speakers as per TSS No.-5

Supply, installation, testing and commissioning of wall mount speakers as per TSS No.-6

Supply, installation, testing and commissioning of audio DE embedder as per TSS No.-7

Supply, installation, testing and commissioning of ceiling mount microphones as per TSS No.-8

Supply, installation, testing and commissioning of table mount microphones as per TSS No.- 9

Supply, installation, testing & commissioning of Cat-6 cable as per TSS No.-10

Supply, installation, testing & commissioning of data points as per TSS No.-11

Supply, installation, testing and commissioning of 1P x 1.5 Sq. mm shielded twisted pair cable as per TSS No.-12

End termination of 1P x 1.5 Sq. mm shielded twisted pair cable as per TSS No.-13

Supply, installation, testing and commissioning of shielded microphone cable as per TSS No.-14

Supply, installation, testing and commissioning of 2C x 4 Sq. mm Copper conductor, speaker cable as per TSS No.-15

End termination of 2C x 4 Sq. mm Copper conductor, speaker cable as per TSS No.-16

Supply and installation of 1M TRUE 4K HDMI Cable as per TSS No.-17

Supply and installation of 5M TRUE 4K HDMI Cable as per TSS No.-18

Supply and installation of 10M TRUE 4K HDMI Cable as per TSS No.-4,10

Supply and installation of 10M Active USB cable for conference system as per TSS No.-20

Supply and installation of 4K HDMI Transmitter and Receiver as per TSS No.-21

Supply, installation, testing and commissioning of USB extender over cat 6 cable as per TSS No.-22

Supply, installation, testing and commissioning of USB Hub as per TSS No.-23

Supply, installation, testing and commissioning 24 ports fully loaded POE+ layer 2 ethernet switch as per TSS No.-24

Supply, installation, testing & commissioning of 24 port RJ45 patch panel along with cat6 patch cord as per TSS No.-25

Supply, installation, testing and commissioning of workstation as per TSS No.-26

Supply and installation of following antibacterial faceplate and cover as per TSS No.-27

12 Module

6 module

3 module

2 module

Supply, installation, testing and commissioning of following antibacterial modular switches as per TSS No.-28

16A SP switch

6A SP switches

Blanking plates

Supply, installation, testing and commissioning of following antibacterial sockets as per TSS No.-29

6/16A sockets (3M)

6/16A sockets (2M)

6A sockets

Fabrication, supply and installation of MS items like Angle/flat/channel etc. as per TSS No.-30

Fabrication, supply and installation of powder coated MS box as per TSS No.-31

Supply and installation of 8 SWG copper wire as per TSS No.-32

Supply, installation, testing and commissioning of 15W recess LED round light fixture as per TSS No.-33

Supply installation testing and commissioning of following Modular box faceplate and covers with sockets as per TSS No.-34

3M faceplate and cover with 1 RJ 45 Data point + 2 blank plate

3M faceplate and cover with 1 RJ 45 Data point + 1 RJ 11 Telephone point+1 blank plate

3M faceplate and cover with 1 RJ 11 Telephone point + 2 blank plate

3M faceplate and cover with 3 RJ 45 Data point

2M faceplate and cover with 1 RJ 45 Data point + 1 blank plate

2M faceplate and cover with 1 RJ 11 Telephone point + 1 blank plate

Supply, installation, testing and commissioning of floor cable raceway as per TSS No.-35

Supply, installation, testing and commissioning of 2M face plate with cover and box as per TSS No.-36

SITC of following point wiring items for lighting power, data network point, AC points as per TSS Ele3. 16A+6A Secondary Power Point ( from power point to power point) as per TSS Ele3.

SITC of following point wiring items for lighting power, data network point, AC points as per TSS Ele3. 16A+6A Primary Power Point ( from DB to power point) as per TSS Ele3.

Supply & installation of 38 x 25 mm PVC casing and caping as per TSS No.-39

Supply & installation of DLP Trunking 80 x 50 mm as per TSS No.-40

Supply, installation, testing and commissioning of popup box with Retractable HDMI cable as per TSS No.-41

Providing , supplying, loading, unloading, storage, installation and fixing of Conference/Cupboard table. The unit to be made 19 mm thick marine plywood. The top of the units to be 30 mm thick and duly laminated on both sides. The outer sides to be laminated with 1.0 mm thick laminate of approved make and the inner sides to be laminated with balancing grade laminate. The unit to have 19 mm thick marine plywood sides duly laminated on both sides with 1.00 mm thick laminate of approved shade. The appron of the unit to be 38 mm thick and laminated on both sides. The sides to be fitted with levellers. The edges of the top to be fixed with 12mm thick solid wood lipping duly polished. Please refer tender drawing in section-VI

Providing and fixing 3.00 mm thick Hetrogeneous Vinyl flooring faux-wood finishes in flooring and skirting of tile sizes 102 mm / 185 mm x 915 mm with 0.5 mm wear layer thickness approved make in approved pattern on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturer including levelling small undulations with plasterof paris if required, rolling with light wooden roller weighing about 5 kg all complete as directed by Engineer-incharge in approved colour and shade.

Designing, providing and fixing of 4 mm thick approved make and shade Aluminium Composite Metal Panel of approved make cladding at different locations including soffits of over-hangs but excluding aluminium frame work with grids filled in with weather silicon sealant as per the drawings. The ACM panel composition shall be of 0.5 mm thick PVDF coated aluminium sheet + 3 mm thick low density polyethelene virgin resin core + 0.5 mm thick polyester (PVDF) coated Aluminium sheet all complete as per approved shop drawings and specification (Aluminium frame work will be paid under reelevant item). Note : ACMP shall be measured to the actual visible area of the ACP sheet including silicon joints as fixed on site

Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately)

Anodised Aluminium sections (Minimum anodizing thickness of 15 micron)

Extra for colour Anodizing

Dismantling Aluminium / Gypsum partitions, wooden partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplaus material and stacking of serviceable materials within 100 m lead as directed by the Engineer-in-Charge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 100 m lead For thickness of tiles above 10 mm and up to 25 mm.

Providing and fixing 19 mm Marine Fire Resisitant plywood IS:710-2010 marked of approved make, pressing plywood adequately by adhesive of approved quality, manufacturer and pressing nails (lost headed) punch the same, cutting & fitting the plywood as per requirements, finish the same as per the instruction of the EIC.

Providing and fixing decorative high pressure 1.5 mm thick laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S including cost of adhesive, labour etc. complete as directed.

TECHNOCRATS SECURITY SYSTEMS PVT LTD (BID ID -3194707)