WBPWDEE/KNHED/ShortNIQ47/21-22

Amount

S & F 415 Volt,400 Amp (Front operated) SDSFU with its HRC fuse Link -- L&Twith sheet steel enclosure on angel iron frame including Cabel entry box of 400 Amp. (Front operated) Make- L&T/Siemens/ABB

Necessery fabrication job including making hole in busbar for fixing new main swith on existing panel after shifting two nos main switch on wall as per direction of EIC.

Supply & laying of 4 x Single core of 150 Sq.mm 1.1 KV Grade PVC flexible CU. wire (Make- glostar, KEI, Finolex, havells) , 6 inch PVC pipe heavy gauge flexible pipe . from LT Panel to SDSFU including Saddel .as directed by EIC

Supply & drawing 1.1KV grade2Rx 3.5C x 120 sq.mm.Al. Ar. PVC /XLPEcable & 2 x 10 SWGGI wire. Through MS clamp saddling of flat size 12mm x4 saddling(3' gapping) on wall, Under the Ground & surfacesurfaceFrom LT panel to PSA plant ( Make- Glowstar/ KEI/ Havells)

Supply & Fixing of L shape MS angel 50x50x6 mm of length 10" x 6" Including making drilled hole,Fixing on wall with 2 set anchor bolt with 2 coat RO primer and Paint.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables. [F4/7©] a) 4core X 120 sq.mm.

b) 4 core X 150 sq. mm.

b) 4 core X 25 sq. mm.

Finishing of the XLPE/PVC insulated armoured cable ends by crimping method with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to switch, BDB and BBC etc. [F-5/8.(b)] a) 3.5 core X 120 sqmm

b) 4 core X 150 sqmm

c) 4 core X 25 sq. mm.

Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of powder coated colour. With 25x25x3mm angle iron suppor of following size: 300x50x1.25mm (18SWG)

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By TATA-Medium GI pipe [G1/2(a)]

Earthing with 25 mm dia Copper pipe earthing 3.04 Mts. long and 25mmx5mm Copper strip (4 Mts. long), 13 mm dia x 80 mm long Copper bolts, double nuts, double washers incl 25Kg earthing chemical for DG neutral earthing

Supply and laying 50mmx5mm hot dip GI flat earthing strip laying in ground as per EIC for DG and AMF panel body earthing including all necessery work like making hole, welding, connecting with GI bolt etc.

Supply and laying 4c x 2.5 sq copper armoured cable for DG communication ( Make- Glowstar/ KEI/ Havells)

Installation of AMF panel in existing DG room after making foundation as per direction of EIC

Finishing the end of following PVC singel core CU cables by crimping method incl. suplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials of following size: 1C x150 sq mm cu cable

(Rate should be quotated including all taxes and duties)

ALPHA ELECTRICALS

M/s Singh Electrical Works

Electromech Engineers Co-Operative Society Ltd.

C. CHOWDHURY AND CO

RELIABLE CONSTRUCTION