GE (N) P/T- 93 OF 23-24SPL REP TO BLDG NO 1A NEHRU MARG PROVN OF WEATHER SHED KOTA STONE FLOORING INCL GATE PILLAR ALONGWITH E/M WORK NEAR BLDG NO P-3A PROVN OF PAVED AREA ALLIED WKS NEAR BLDG NO 5 IN THE AREA OF AGE B/R (EAST) UNDER GE(N) PUNE

Amount

Excavation in trenches n.exc 1.5m wide and n.exc 1.50m deep and getting out avg soil complete all as specified and as directed.

M&L for PCC 1:4:8, type D-2 (40mm graded agg) as in foundations,filling and mass concrete complete all as specified and as directed.

M&L old size brick fly ash bricks straight or curbed on exc 6M mean radius built in CM 1:6 complete all as specified and as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exc. 25cm in soils complete all as specified and as directed.

Removing excavated material not exc. 250mtrs and depositing where directed at a level not exc. 1.50mtrs above the starting point complete all as specified and as directed.

M&L for 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement with two coats of exterior acrylic emulsion paint over a coat of primer incuding preparation of new surface complete all as specified and as directed.

Supply only chain link MS galvanisd fencing, anysize or type complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire complete all as specified and as directed.

S&F of rolled mild steel equal angles framed work of Fe-290 (Gde-E-165) for cladding, glazing and chowkat/frame with the angles, cleats and connecting plates including welding, drilling for holes as necessary complete all as directed.

S&F for flat iron fillets for securing chainlink/wire mesh including all necessary drilling, bolting or riveting etc, conforming to Fe-290, Gde E-165 complete all as specified and as directed..

M&L for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square but (dia of neck 10mm and 10cm long=0.099Kg/Each) complete all as specified and as directed.

S&Fin repair for fibre glass reinforced translucent plain sheeting 2.00 mm thick fixed with coach screw and washer in gate, wall etc. complete all as specified and as directed.

Dismantling of single layer Mangalore pattern tiles or similar tiles in roofing complete all as specified and as directed.

M&L for roof tiles Mangalore pattern interlocking at side joints, laid dry complete all as specified and as directed.

All as above item No. 14 but except tiles.

M&L for ridge or hip tiles to suit Mangalore pattern roofing bedded and jointed in CM 1:6 complete all as specified and as directed.

Dismantling of eaves/ boarding any description and in any position fixed with nails complete all as directed.

M&L for Eaves/ weather boarding with 20mm thick fibre cement board (non asbestos) and fixed with self drilling and tapping screws of CSK head and joints finished with jointing compound and fiber tape as per manufacturer's recommendation complete of approved arch pattern any size and shape; including preparation of new or previously untreated surfaces over pink primer and two coat synthetic enamel paint complete all as specified and as directed. Make: V-Board (Visaka Industries Ltd)/ Everest/ Charminar/ Ramco

Dismantling of plain or corrugated steel sheeting any gauge thickness, incl nainital or similar pattern as in eaves board etc complete all as specified and as directed.

S&Ffor 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 120gms/ Sqm complete all as specified and as directed.

All as per serial item No. 20 here-in-before but except sheeting.

Dismantling battens for tiles of any size and description spaced exc. 15cm including tilting fillets complete all as directed.

S&Ffor mild steel work in tubular sections in battens including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and as directed.

Dismantling timber scantling in fillets, rails, posts, rafter, purlins etc, under 40 Sqcm in section, unframed work complete all as directed.

S&F rolled mild steel sections Fe-410-W(Gde-E-250)quality-B, as in main and cross beams, hip and jack rafters; purlins where connected to common rafters fixed with angle cleats or other connecting plates complete all as specified and directed

M&L for preparation of newly steel or iron surfaces and applying one coats of synthetic enamel paints over a coat of red oxide primer.

Demolition of stone slabs and tiles laid dry or laid dry and pointed of any description or thickness in floors, aprons etc.

M&L for machine cut cudappah stone slab 20-25mm thick, laid over & including 15mm thick cement mortar 1:4 screed base, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L Granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in and including cement mortar backing CM (1:3),10 mm thick, including molding, pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed.

M&L for rendering 10 mm thick cement plaster on faces of brick or concrete surfaces in cement mortar(1:6) finished even and fair without using extra cement , including taking down existing plaster with two coats of OBD of any tint over a coat of primer all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets.

Material and labour for 8 to 10 mm thick Gypsum PVC laminated false ceiling board on and including GI powder coated grid work of size 605mm x 605mm with using 32.0 mm x 23.5mm x 1.5 mm thick main tee, 26.5 mm x 23.5 mm x 1.28 mm cross tee and 23.5mm x 23.5mm x 1.5 mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways complete all as specified and as directed. Make :- Armstrong, Diaken, New Age.

Taking out old rusted/unsv, structural steel work such as steel windows/ventilators and removing same from work site complete including necessary cuttings in brick walls all as directed.

S&F Aluminium powder coated louvered ventilator using rectangular tube of size 63.5X52X1.5mm thick, blades set, with provision of exhaust fan using aluminium section heavy duty including glass 4mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc.

S&F in replacement angle stop valve with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified. Make: Jaquar Cat Part No FUS- 29053 FUSION SERIES or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs, chromium plated bib cock with wall flange quarter turn complete all as specified and as directed. Cat No. FUS-29037 of make Jaquar ‘Fusion' series or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair Brass Chromium plated towel ring all as specified and directed. Make: Jaquar Cat No AEC-1121 or of equivalent make as per Appx 'A' as approved by GE

S&F in repairs Two Way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule complete all as specified. Make Jaquar Cat Part No FUS-29041 FUSION SERIES or of equivalent make as per Appx 'A' as approved by GE.

S & F in repair Brass Chromium plated towel rail all as specified and directed. Make: Jaquar Cat No AEC-1111B or of equivalent make as per Appx 'A' as approved by GE

Taking down chowkats or frames not exc.1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed

-Ditto- all as per Item No.40 above but exc. 1.5 sq. m but n exc 4 sqm each complete all as specified and directed

Factory made PVC Flush door of 33 to 35 mm thick overall thickness comprising of 19 SWG MS tube of size 19 x 19 mm (19 gauge) covered with 5mm thick PVC Sheet, (any colour as approved) on both sides core shall be filled with 19mm to 20mm thick PVC solid board taking down with existing one complete all as specified.Note : All screws shall be self tapping chroming plated all as specified and directed by Engineer-in-Charge.

Factory made 100 % solid wood plastic composite(WPC) door frame, single rivet 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

S & F in repair brass Chromium plated soap dish(Polycarbide) , fixed to wall with CP brass screws, all as specified and directed. Make: Jaquar Cat No AEC-1133 or of equivalent make as per Appx 'A' as approved by GE

S&F in repair stainless steel butt hinges 100mm complete all as specified and directed. NOTE:- all screws shall be self tapping chrome plated and length of screws not less 38mm complete all as specified and as directed.

M&L GI tubing 15mm dia with all fittings and fixed complete to walls ceilings or laid in floors of medium grade.

M&L Cutting chases, pinning in, making good to facings where required in stone walls and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelve, lintels etc and cutting chases for concealed water tubing or concealed conduct wiring etc and making good cutting n exc 10 cm girth complete all as specified and directed by Engr-in-Charge.

M&L GI tubing 20mm dia with all fittings and fixed complete to walls ceilings or laid in floors of medium grade.

S&F PVC (SWR) floor Trap, plain with grading of dia outlet 100mm dia incl fixing .

S&F in repairs 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors.

S&F in repairs 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls.

S&F in repairs 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors.

S&F in repairs 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls.

S/F PVC (SWR)vent cowl of size 110mm bore

S/F in repair for glass shelf 450mm x 150 mm x 8mm thick with chromium plated railing fixed with and including chromium plated brackets complete aii as specified and as directed.

S/F PVC connection 15mm bore with two nuts and washers of PTMT of length 450mm all as specified.

M&L non-skid coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding exc. 0.06 sqm but not exc. 0.11 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 and demolition of existing tiles complete all as specified.

M&L for coloured glazed ceramic Joint free tiles of size 600mm x 300mm x 8mm thick of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over & including 10mm thick rendering in cement mortar 1:4 as in vertical surface etc complete all as specified & directed.

M&L for coloured glazed ceramic highlighter Joint free tile of size 600mm x 300mm x 7 to 8mm thick, colour and pattern as approved by GE, as in vertical surface set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar 1:4 etc complete all as specified & as directed.

Demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L PCC (1:4:8) type D2 using 40mm graded aggregate 75mm thick as in sub base complete all as specified and as directed.

S&F in repair white counter top Basin (self-rimming) Oval shape of size 550mm x 430mm x 195 mm fixed in position including waste coupling and PVC waste pipe, 32mm dia. complete Make: Perryware Model Aquarius, Cat Part No – C0466(SP) or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs 15mm dia brass chromium plated fancy type, pillar tap with fly nuts capstan head screwed down high pressure with or Without lettered hot or cold with long scewed shank complete all as specified. [Make : JAGUAR or equivalent in Plumber/Ess Ess]

S&F in repair Vitreous china Urinal, Half stall type, white with waste pipe and CP brass spreader complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and union for discharge pipe including Cp Urinal spreader for fixing with 15 mm dia pipe complete all as specified. Cera/Prayag/Johnson Pedder.

S&Fin repair for factory made 50 mm thick, 900mmX650mm manhole cover with additional frame for fixing, of precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished the surface even and fare including reinforcement MS TMT bars 6mm dia @ 150mm centre to centre both ways and set in CM 1:4 and handles including demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and as directed.

Material and labour for cutting into existing manhloes for connecting new drains,making good to pipe and rendering ,cutting out existing benching for and forming branch channel (1/2 round or 3/4 section ) in PCC (1:2:4) type-B-1 , Smooth finished and reforming benching as required for 150 mm internal dia of pipe complete all as specified and as directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded agg) concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 150mm dia of bore pipe including demolition of existing old one with PCC complete all as directed.

M&L in repair for 150mm bore RCC pipes, class NP2 laid and jointed with collars and tested including demolition of existing old one (salt glazed earthware, AC or reinforced pipes etc) set in cement mortar complete all as directed.

S & F in repairs Magnetic and connected plate to shutters and frame complete all as specified and directed.

S & F in repair 30mm thick continuous (piano) hinges, mild steel, bright finish or electrogalvanised

S&Fin repair for corner glass shelf of size 200mm dia and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and as directed.

S&Fin repair for corner glass shelf of size 300mm dia and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and as directed.

S&Fin repairs for hand shower chromium plated (health faucet) 15 mm bore, (ABS body) with 8mm dia. 1 metre long flexible tube & wall hook, Cat No. ALD-CHR-593N of make Jaquar or of equivalent make as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repair Toilet paper holder of stainless steel, all as specified and directed. Make: Johnson Fusion series Cat part No: T3254C or equivalent as approved by the GE.

S&F 20 mm dia stop valves cast copper alloy, screwed down, high pressure with crutch or butter fly handles, screwed both endsfor iron pipe complete all as specified and as directed.

S&F in repairs vitreous china wash down floor mounted coupled water closet with PP soft close seat cover, hinges, fixing accessories and accessories set, size 410x720x800mm, S trap 250mm, flushing cistern with cistern fittings complete all as specified and as directed. Make :- Jaquar Cat No. VGS-WHT-81751 S (Bowl) and VGS-WHT-81201 (Cistern) or of equivalent make as per Appx 'A' as approved by GE

S&F in repairs, chromium plated wall mixer quarter turn with telephonic shower arrangement connecting legs wall flanges and telephone shower crutch, hand shower 95mm round shape single flow (ABS Body chrome plated with gray face plate) with rubit cleaning system and easy flex tube in chrome finish 1.5m long with nuts as per Cat No.QQT -7267, HSH- CHR 1737, SHA-CHR 571 of make Jaguar ‘Queen series' or of equivalent make as per Appk 'A' as approved by GE complete all as specified and as directed.

S&F in repair cast copper alloy CP overhead shower arm 305mm(12") long square shape with wall flange(for wall mounted showers) complete all as specified and directed by Engr-in-charge. Make : Cera Cat Part No F7040202 or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs Overhead shower round shape 100mm single flow (ABS Body Chrome plated with gray face plate) with Rubit cleaning system Make- Jaguar Cat No : OHS:- 1989

M&L for rendering 15mm thick in CM (1:4) on fair faces of brick or concrete surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 100mm thick PCC (1:4:8) type D-2 using 40mm size stone agreegate in sub-base of floor complete all as specified and as directed.

M&L Textured heavy duty exterior tiles of size 300mm x300mm x 10mm thick , set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed bed in CM (1:4) including demolition of existing tiles complete all as specified. make ;- Jonhson Endura textured design or equivalent of kajaria /Somany).

S&F for mild steel hollow mild steel section for structural work in round or rectangular tube section as in main and cross beams, hip and jack rafters purlins, colum post where connected to common rafters including MS flat iron wind tiles drilled for fixing , angle cleats or other connecting plates as per IS 4923-1968 complete all as specified and directed.

Material and labour for 08 to 09 mm thick Gypsum PVC laminated false ceiling board on and including GI powder coated grid work of size 605mm x 605mm with using 32.0 mm x 23.5mm x 1.5 mm thick main tee, 26.5 mm x 23.5 mm x 1.28 mm cross tee and 23.5mm x 23.5mm x 1.5 mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways complete all as specified and as directed. Make :- Armstrong, Diaken, New Age.

S&F in repair stainless steel utensil rack for modular kitchen incl latches, magnetic hinges, handle and all necessary fittings required for modular kitchen, all as specified and directed by Engineer-in-charge, consisting following components:- (a) Cup plate rack made of 3 mm dia stainless steel wire (b) Meal plate rack made of 3 mm dia stainless steel wire (c) Catlery Basket made of dia stainless steel wire (d) Bottle basket plate rack made of 3 mm dia stainless steel wire (e) Stainless steel hinges 19 mm long L type. (f) Stainless steel hinges 12 mm long L type. (g) Stainless steel hinges 6 mm long L type. Note :- (1) Weight of each unit shall be assessed at site. (2) PVC part / Shutter shall be measured and paid separetly under item no.103/104 below

S&F Drawer sliding channel fixed with screw and fitting fixture of 450mm long all as specified and as directed

S&F 18 mm thick UV board duly edge banded with 0.8 mm thick PVC taping fitting of shutters shall be fixed with and including continous piano steel hinges and modular handles, design and colour as approved by GE suitable for cup board etc including taking down with existing one complete all as specified and directed.

S&F Shelves made of HDHMR board 18 mm thick water proof for anti-termite shall be duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolition of cement Concrete( unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 40 mm thick Cement concrete 1:2:4 type B-0 (using 12.5 mm graded aggregate) as in sub base complete all as specified and as directed.

M&L for Virified GBT light /dark shade tiles 10 to 12 mm thick (square/ rectangular) polished, area of each tiles 800 mm X 1600 mm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match bedded over 15mm thick screed bed or bedding layer for floor finishes in cm (1:6) complete all as specified and as directed.

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and directed.

M&L for excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and as directed.

M&L for Pre-cast cement concrete block masonry with solid blocks 1:3:6, type C-1, exc 10cm in width and setting in mortar in CM 1:6 complete all as speified and directed

M&L for 15mm thick plastering in CM 1:4 on brick or concrete wall surfaces etc finished even and fair.iusing without extra cement complete all as specified and directed.

M&L for preparation of new plastered wall surface of any description, width or girth, and applying two coats of cement base paint over a coat of primer complete all as specified.

M&L for 15mm thick plastering in CM 1:6 on brick or concrete wall surfaces etc finishedeven and fair.incl two coats of OBD a coat of primer on new wall surface all as specified and directed.

M&L for broken stone or boulders Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface

M&L for 100mm thick PCC type D- 2, 1:4:8 (40mm graded aggregate) as in sub base/plinth protection etc complete all as specified and directed

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to achieve mirror polished surfaces including 15mm thick screed bed or bedding of layer in CM 1:6 complete all as specified and directed.

M&L for machine cut 20mm to 25mm thick polished cudappah stone slab as in shelves, partitions, cooking platform below granite stone and like including necessary jointing and pointing and making good to disturbed surface complete all as specified and directed

M&L rounding to edges of stone slabs one edge,such as in steps, cooking platform and other similar situations complete all as directed

M&L glazed ceramic coloured tiles of size 450 x 300 x 7-8mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 complete, all as specified.

S&F in sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, incl 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 914mm x 460mm, bowl size 405mm x 330mm x 160mm all as specified.

S&F in bib cock long nose quarter turn suitable for 15mm bore pipe long body with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified.

S&F for mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 as in batterns for roofs, post, purlin, rafter etc complete all as specified and as directed.

S&F for Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L for preparation of new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge

M&L PCC 1:2:4, type B-1 (using 20mm graded aggregate) as in cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets,copings, kneelers,bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed

S&F for 0.63mm thick Plain Galvanised mild steel sheeting for mangalore roof, ridges, valley gutters drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, both sides inclusive complete all as specified and directed.

M&L coloured vitrified double charged tiles 10mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.36sqm as in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 20mm thick screed bed or bedding layer in CM 1:6 and demolition of existing tiles of any description complete all as specified.

M&L position suspended false ceiling system using T-grid suspended ceiling grid system. The size of grid shall be 600x600mm, with GI frame work main runner 38 x 24 x 3600mm, cross 'T' 25 x 24 x 60mm/25 x 24 x 1200mm and wall angle 24 x 24 x 2540mm (thickness of the material of 0.30mm ), using 8-9mm thick ceiling panel laminated with PVC film on front face and foil back available in due drop texture as per IS-2095, part-I-1996, fixed in the grid of T-grid suspended ceiling grid system duly suspended by 4mm dia GI bar hanger from the purlins of the roof with butterfly clips all as specifed and directed by Engr- in -charge. Make:-Gyproc/Armstrong.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness with glossy finished surface, M-35 Grade,set, jointed and pointed in neat cement slurry in floors with grey cement and pigments over 25mm thick sand cushioning complete all as specified and directed.Note:Sand for cushioning shall be measured and paid under separate relevant items

-Ditto- all as per item No 119 here in before, but except tiles complete all as specified and as directed.

M&L for 25mm thick sand cushioning laying, spreading and levelling complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed

M&L for Pre-cast cement concrete block masonry with solid blocks 1:3:6, type C-1, exc 10cm in width and setting in mortar in CM 1:6 complete all as speified and directed

-Ditto- all as per item No 123 here in before, but except bricks

Material and labour for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC concealed conduit including all accessories, Metal flush box of suitable module, with earth dolly, covered with modular white cover plate & frame after chasing in brick / stone masonry walls etc for accomodating modular switches, sockets, regulators etc including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed for the following

One light / wall / exhaust fan point controlled by one, one way switch 6 Amps complete all as specified and as directed

One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on same board complete all as specified and as directed

One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on independent board complete all as specified and as directed

Description all as per 125 here-in before but using 2.5 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 6 pin socket outlet plug point,16 Amps independent including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed

Supply and fixing Modular Switch - 6 Amps, Single pole one way, one module complete all as specified and as directed.

Supply and fixing Modular Switch - 16 Amps, Single pole one way, one module complete all as specified and as directed.

S & F Modular socket outlet multipurpose 6 Amps, 5 pin, 2 module, complete all as specified and as directed.

S & F Modular socket outlet multipurpose 16 Amps, 6 pin-shuttered type, 2 module, complete all as specified and as directed.

Supply and fixing decorative wall light fitting 04 Watt LED with 1 Light opal glass with Nickel finish wall lamp complete including connecting lead,and all ncessary arrangement for fixing , making good disturbed surfaces complete all as specified and as directed. Make Halonix Cat JNL-NKL-WLRB0480SE27 or equivalent in Havells,

Supply and fixing 20/22 Watt Inverter LED Batten aluminium body with Opal Diffuser, IP20, Battery back-up & Functioning as per Product TDS with intregrated electronic driver, connector block, holder, decorative end caps, LED tube light etc complete with all accessories prewired and mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed. Make Halonix Cat No LED INVERTER BATTEN HLB-08-22-CW-INV or equivalent in Havells, LHEXACP7FNIW020

Supply and fixing Bed side lamp fitting 03 Watt black 3000K WW LED with1 Light including LED complete and connecting lead,and all ncessary arrangement for fixing , making good disturbed surfaces complete all as specified and as directed. Make Philips Cat No 48042 black 3000K WW or equivalent in Havells,

S & F for LED post top lantern 70 watt or above light fitting made of cast aluminium spigot housing with decarative opal polycarbonate diffuser with IP 65 protection white / warm white as per site requirement complete with all accessories fixed on GI pipe 50 mm dia complete all as specified and directed. Make Halonix cat No. BGCL 70 W LED WH of Bajaj or equivalent in jaquar or halonix or Shakti (clear glass).

S & F Integral decorative LED bollard with aluminium [pipe housing, glare free PMMA diffuser with IP 65 protection suitable for 09/10 watts LED bulb with necessary elecrical connections with adequate size including removal of old unserviceable one complete as all specified and as directed. Make Halonix Cat Part No HLOB-27-10-CW-1M, Jaquar LBLDCONO10XW, Shakti SZPGBMX009-F FRUSTUM or equivalent in Havells

S & F Rectangular pole mounted cable junction box suitable for 3 Phase 440 Volt , 20 Amps of size 130x130x77 mm ( IP 66 Protection) made out of SMC sheet not less than 3 mm thickness, cable entry at botton, left hinged door, with & including PVC Bus bar Terminal connection plate for cable connection, SP MCB 6 Amps, and MS clamps to secure box with pole , complete all as specified and as directed. Make Sintex of Equivalent

M & L Cement Concrete 1:3:6 (20 mm graded aggregate) as in coping of pole etc including form work & finishing the surfaces even & smooth with out using extra cement complete including demolition of old PCC work all as specified

Supply and laying 40mm outer dia, double walled corrugated (DWC) HDPE duct pipe conforming to IS- 14930 Pt-II with antirodent and non flame propogating properties plete with fittings for cable protection complete all as specified and as directed.

Taking down and Supply, lay, joint, test and commissioning of LT under ground cable 1100 volt grade , XLPE insulated and PVC sheathed heavy duty armoured with aluminium conductor , IS 7098-I Marked, Laid in trenches/ducts/fixed on poles/walls/laid under roads/paths/drains/culverts or encased in GI pipe including cable glands, lugs jointing material etc complete all as specified and directed. cable of the following size.

(a) 35 Sq mm 3.5 Core

(b) 10 Sq mm 2 Core

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Taking down of old unserviceable Light fitting of any type complete all as specified and as directed.

S&Fexhaust fan, AC single Phase, working on input voltage 140-285 , of size 250 mm sweep, 1600 RPM, Power consumption16 W with BLDC Motor, blades, frame and louvers provision of 3 core 1.5 sq. mm copper conductor PVC insulated & PVC sheeted flexible wire from ceiling rose/connector to fan including making connections complete all as specified & as directed .

S&F in repair for MCB DB SPN 04 way double door sheet metal enclosure with OEM specified common bus bar and neutral link compete including inserting in wall all as specified. MAKE:- LEGRAND/SCHNEIDER

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

5. S & F submain wiring with 2 single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 4.0 Sqmm and one single core 4.0 Sqmm flame retardent low smoke (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including concealed in stone masonary PVC conduit and conduit accessories heavy duty ISI marked, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed all as specified and as directed complete all as specified and as directed. Note :- ( Two runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one length).

S&Ffor wall mounted fan of size 400 mm sweep BEE. Five star rated ISI marked and connecting up including provision of cable from ceiling rose or connector to fan complete all as including removal of old unsv fan and handed over to store yard of AGE E/M (North) complete all as specified and directed. Note : a) Quoted Rate is deemed to inclusive of Stickering/Marking/writing of MES numbers in bottom of ceiling Fan as directed by Engr-in-Charge. Make:- Bajaj MIDEA BW 2200, USHA Pentacool, Havells V3.

Taking down and Supply, lay, joint, test and commissioning of LT under ground cable 1100 volt grade , XLPE insulated and PVC sheathed heavy duty armoured with aluminium conductor , IS 7098-I Marked, Laid in trenches/ducts/fixed on poles/walls/laid under roads/paths/drains/culverts or encased in GI pipe including cable glands, lugs jointing material etc complete all as specified and directed. cable of the following size.10 Sq mm 2 Core

M&L for PCC 1:2:4 type C-2 using 20 mm graded stone aggregate earth pit including necessary form work complete all as specified and directed .

M & L Tube medium grade galvanised as struts of length of 3.6 mtr comlete all as specied and directed

Supply and laying 63 mm outer dia, 51 mm inner dia double walled corrugated (DWC) HDPE duct pipe conforming to IS- 14930 Pt-II with antirodent and non flame propogating properties plete with fittings for cable protection complete all as specified and as directed.

S&F flexible 3 core copper cable of capacity 2.5 sqmm including connections all as specified and directed.

S & F new cable junction boxwith metric knock out for cable entry M4\50 box of size 250x250x155 mm ( IP 66 Protection) with connector and includuing MCB SP 6 Amp with sealing ring and lock nut fixed on pole /embeded in pole foundation made out of SMC sheet not less than 3 mm thickness, cable entry at botton, left hinged door, with & including PVC Bus bar Terminal connection plate for cable connection, and MS clamps to secure box with pole , complete all as specified and as directed. Make Sintex of Equivalent

S&FCross arms, bracing, support,clamps and back plate fabricataed from structural steel section including nuts,bolt and washers,welding bending cold or hot, drillinghole for bolts in the shape or size as indicated or directed and inclussive of one primer coat, one under coat and one finishing coat paint all as directed and spcified.

M & L light grade 40 mm bore pipe with length 1.5 mtr bent in shape meant for btacket on the poles for lights complete all as specified and directed

S&FLED Street light fitting 45 watt, 230 V AC outdoor type with high pressure die cast alluminium housing and heat arrangement complete with driver, lamp bracket with impact and corrosion ressistant including thermal management in multiple optics complete with IP/65/66 protection complete make philips model BRP331 5400S, LED45 or equivalent in crompton/wipro all as directed and spcified.

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

Gauri Associates

VISALAKSHI WATER PROOFINGCOMPANY PRIVATE LTD

M/S Eknath agencies

R k construction

AJINKYA VIKRAM GAIKWAD