Construction Fabrication and related works for new office

Providing and laying autoclaved aerated cement block of Megha lite or Siporex or Aerocon or equivalent for masonry works with 100mm thick AAC blocks in super structure at 1st floor level, wall with RCC band if required with approved block laying polymer modified adhesive mortar of Wallplast or Siporex or equivalent make all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made separately).

Providing and plastering as mentioned below using factory manufactured pre mix, ready mix of Build Well ready mix plaster of Walplast Products Pvt. Ltd or Readiplast of Ultratech Cement Ltd or Readymade polymerised Dry mix Plaster - Silicoplast of Precise Conchem Pvt. Ltd.or other approved equivalent make, having minimum composition of Cement to Sand as 1 is to using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechanical mixing with water in a metallic tray only to make good consistency as per the specification of the Manufacturer and applied over exterior masonry and concrete surfaces in plain, curved surfaces and all geometric shapes and sizes including making plaster grooves, plaster bands of specificized sizes if any, final rendering, including using richer mix for making corners if necessary and making nosing or drip mould in plaster wherever required, at all floors, levels, all heights and locations including scaffolding, preparing the surfaces, finishing and rendering with sponge to correct line, level and plumb, curing or chemical curing etc. complete as per specification and drawings and as directed by Engineer-in Charge. 15 mm thick internal plaster finishing smooth to get uniform plain surface using RMP for all exposed surfaces concrete and masonry works.

20 mm thick sand face plaster in two coats for brick, concrete surfaces (external or internal) (back coat and finishing coat of 10 mm. thick each) with water proofing agent at 2 percent by weight of cement or as per manufacturers specifications.

Providing and laying 1st quality Steel grey granite coping with 16 or18mm thick circular saw cut machine cut, machine polished in all exposed surface in pattern of all geometric shape as per drawings at all floors and levels as specified laid over MYK Laticrete 335 Adhesive as per manufactures specification including cleaning and preparing the surfaces for bedding, close jointed and mixing with colour powder, pigment to get uniform matching shade or equivalent make, including curing, cutting of stone slab, making cut outs, cleaning and finished to line, level, wastage at all levels, lead, heights in single stone bull nosing, champhering, half rounding for ledge wall etc. cleaning, curing complete including all materials making required grooves in concrete and masonry and making good after completion , labours etc., all as per specification, drawing and as directed by the EIC. Coping 100mm wide and length not less than 2400mm

Providing and laying 1st quality vitrified skirting with 8mm or 10mm thick all exposed surface in pattern of all geometric shape as per drawings at all floors and levels as specified laid over MYK Laticrete 335 Adhesive as per manufactures specification including cleaning and preparing the surfaces for bedding, close jointed and mixing with colour powder, pigment to get uniform matching shade or equivalent make, including curing, cutting of stone slab, making cut outs, cleaning and finished to line, level, wastage at all levels, lead, heights in single stone bull nosing, champhering, half rounding for ledge wall etc. cleaning, curing complete including all materials making required grooves in concrete and masonry and making good after completion, labours etc., all as per specification , drawing and as directed by the EIC. Vitrified skirting 50mm height.

Supply, fixing all types of Structural steel fabrication work for the following using Sail or Tata welded, riveted, bolted in built up sections for spiral stair case, railings and framed work suspenders, supports, portals frames etc., for spiral stair case and railing following at all floors and locations, heights, including scaffolding, bracing, multi level staging, lead etc., gazettes plate, base plate etc. Using specified structural steel sections like angles, tees, flats, bars, chequered plates, sheets Channel or I sections, M.S tubes section, pipes, joists, bolts and nuts, M.S rods, threaded UJ bolts, washers, suitable size anchor fasteners of Hilti or approved make for concrete and masonry, drilling holes in concrete and masonry etc., including supplying, cutting, fabricating, welding, bending to shape, (curved), wastages, hoisting, erecting, fixing in position, making holes, chases wherever required and fixing, embedding in position in concrete, brick work with necessary hold fasts, supporting plates, cleats, gazette plate, screws and rawl plugs and finishing the concrete, brick work after fixing, embedding including painting one coat Zinc chromate primer over shop coat of approved anticorrosive primer and two coats of synthetic enamel spray paint of approved make and colour on all exposed surfaces over a coat of approved steel primer etc. Complete as per specifications, drawings and as directed.

Providing, fabricating and fixing of suspended false ceiling consisting of 12.5mm thick Gypsum plaster board of Saint Gobain suspended on GI framework with staggered joints. GI framework to consist of GI perimeter channels 0.55mm thick 20mm x 30mm along perimeter of false ceiling of ceiling, screw fixed to wall, partition with nylon sleeves and screws at 600mm cc. Suspending GI intermediate channels of size 0.9mm thick 45mm x 15mm from the soffit at max dist 1220mm cc with ceiling angle 0.55mm thick 25mm x 10mm fixed to soffit using proprietary supplied GI cleats and steel expansion fasteners. Ceiling section 0.55mm thick web size 51.5mm and flanges 26mm each and 10.5mm lips are fixed to perpendicular to intermediate channel at 457mm cc using connecting clips. All including cutout for cassette AC unit as per the requirement etc complete with one or more approved putty and two or more coats premium emulsion paint etc,. complete in all floors including lead and lift up to 5 floors.

Supplying and fixing in position at all floors integrated approved power coated or silver anodized aluminium section, profiles (extruded), slim profile sections for all types of aluminium works for office partitions, sliding windows, doors as per drawing of approved manufactures with extruded sections of Jindal or Hindalco or Ecube and glass of Saint Gobain or Asahi etc,. sections for all openings for frames and shutters (including wastages if any) conforming to relevant I.S specifications all as shown in the drawing, including providing and fixing aluminium channel beading, glazing clips fixed with necessary aluminium anodized screws, grouting the gap with approved PUF, beaker rod and silicon sealant with all arrangements like weather strips, clips etc. to make them completely waterproof and free from rattling and all standard accessories like locks, handles, hinges, screws, nails etc., all complete generally as per drawings, specifications etc., all as directed by Engineer-in-charge.

Providing and fixing 6mm thick toughened glass for all geometrical shape and as per the site condition. All cutting edges of the glass shall be grinded properly for handling etc.,

Providing and fixing frameless 12mm thick clear toughened glass door including approved aluminium fish sections with end cap, SS handles, floor springs, patch locking arrangements of approved make including all materials and labour at all levels, lead and lift at all heights of Dorma, Ozone or equivalent etc. complete. Single or Double leaf glass doors of appx size 1200mm or 1000mm or 900mm x 2100mm or 2000mm as per the site condition.