8252 REPAIR/REPLACEMENT OF PLUMBING CLEANING OF WATER TANKS, INTERNAL WATER SUPPLY FITTING, PVC TANKS AND OTHER MISC WORKS IN AFMC UNDER GE (CENTRAL) PUNE

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thick (below or above ground level) and removing rubbish outside of MOD Land complete all as direted.

Dismantling floor, heath or wall tiling including cement mortar bedding (but not backing) removing u/s tiles and rubbish off the premises complete all as directed.

Demolition of brick work built in cement or cement lime mortar of any description including quoins, arches, pillars etc and removing rubbish off the premises complete all as directed.

Taking down cement plaster on brick or stone walls or concrete surfaces etc incl racking out joints, hacking for key, scrubbing down with water etc and removing rubbish off the premises complete all as directed.

Dismentling of stone slab/tiles of any description or thickness laid, bedded and pointed in cement mortar in floor, skirting, hard standing, Apron etc and removing u/s materials off the premises complete all as specified and directed.

Dismantling wall and ceiling board (fibre, pulp or insulation etc) any thickness fixed with screws complete and removing u/s materials off the premises complete all as directed.

Taking down angle iron/wooden chowkats or frames with shutters w/o taking off shutter from the frame area n exc 1.5 sqm each and removing from site of work complete all as directed.

All as per item No 7 here-in-before but area exc 1.5 sqm and n exc 4.00 sqm each.

Taking down shutters area exc 1.0 sqm but n exc 2.0 Sqm each all as directed and removing from stie of work complete all as directed.

Taking up or down 15 mm bore steel water tubing and connection including cleaning for refixing or removal from site complete all as directed.

All as per item No 10 here-in-before but 20 mm bore tubing.

All as per item No 10 here-in-before but 25 mm or 32 mm bore.

All as per item No 10 here-in-before but 40 mm or 50 mm bore.

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6 meter mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for brickwork with fly ash bricks, straight or curved on plan any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with M.S square tube, including necessary hold fast complete fixed in opening as per specifications, drawings all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting, of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat molded plain co lour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck inside with solvent cement for steel & plain co lour PVC sheets for top rail, lock rail& bottom rail on either side & or gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails with suitable PVC sheet banding, and joints to gather with solvent cement, supplying & fixing in the frame at site as per specification & drawing all as specified and directed.

S & F 100 mm long stainless steel butt hinges medium weight, cold rolled long for door shutters complete all as specified and directed.

S&F 150 mm aluminium anodized barrel tower bolts of extruded section for door shutters complete all as specified and directed.

S & F 150 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S & F 300 mm long aluminium alloy , anodised sliding door bolt with hasp , staple( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminium alloy complete all as specified and directed.

S & F in repairs alluminium anodised barrel tower bolt of extruded section 150 mm long complete all as specified and directed.

S&F in repairs extruded alluminium alloy handles fabricated type anodised size 150 mm complete all as specified and directed.

S & F mild steel framed work such as grills, framed guard bars etc and similar work confirming to Fe-290, grade E-165 complete all as specified and directed.

S&F ventiltors/ louvers with parttially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as specified and directed. (a) SP 20048 (b) Glazing clips 19352

S&F aluminium powder coated fancy type curtain rod 25mm bore complete all as specified and directed.

S & F aluminium powder coated brackets suitable for 25mm bore curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed by Engineer-in-Charge.

M&L for Gypsum ceiling board for ceiling prepainted, perforated finish, 600 x 600 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light all as specified and directed.

M&L for 75mm thick levelling course in cement concrete (1:4:8) type D-2 using 40mm graded aggregate complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C2 (using 20mm graded aggregate) as in plinth protection/hard standing, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for 25mm thick levelling course in cement concrete (1:2:4) type B-0 using 12.5 mm graded aggregate complete all as specified and directed.

M & L for Vitrified ceramic tiles( Light shade) 10mm thick (square /rectangular ) polished , area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed flush in white or colour cement with pigment over and including 15mm thick screed bed in cm 1:6 complete all as specified and directed.

All as per item No 33 here-in-before but in skirting / vertical surfaces over and including 15 mm thick baking coat in CM 1:4 complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No 35 here-in-before but in skirting / vertical surfaces over and including 10mm thick baking coat in CM 1:3 complete all as specified.

M&L for coloured glazed ceramic tiles of size 450x300x7 mm thick as in vertical surface set and jointed in neat cement slurry and pointed flush in white cement mixed with pigment over and including 10mm thick baking coat in CM 1:3 complete all as specified and directed.

M & L for 600 x 300 x 6 to7 mm thick, coloured glazed vitrified tiles as in skirting/dado set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick rendering in cement mortar 1:3 complete all as specified and directed.

M&L for precast coloured, chequered cement concrete tiles, glossy finish of size 305 x 305mm x 25mm thick, conforming to IS-1237 (2006) set jointed and pointed in neat cement slurry in floor laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M & L for granite ( of any type ) work ( table rubbed and polished ) 18 to 20 mm thick in steps, jambs, pillars, window cill , cooking platform and flooring in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including screed bed or bedding layer 15 mm thick, in CM 1:6 complete all as specified and directed.

M & L for chamfer, splays or arris in facework to granite exc 15 mm but n exc 50 mm wide complete all as specified and directed.

M&L Machine cut cudappah stone slab 20mm to 25 thick, over cement screed base laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 over Stone /brick / concrete wall surfaces trowelled to even & smooth w/o using extra cement for internal wall surfaces complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 over Stone /brick / concrete wall surfaces trowelled to even & smooth w/o using extra cement mixed with WPC @ 3% by the weight of cement or as per manufacturer's instruction for external wall surfaces complete all as specified and directed. Note: WPC will be supplied and paid under separate item.

M&L for 5 mm thick rendering in CM 1:3 over concrete surfaces of chajjas, extended facias, etc , trowelled to even & smooth without using extra cement complete all as specified and directed.

Supply only water proofing compound complete

M & L for Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over 2 mm thick wall care putty complete all as specified and directed.

M&L for preparation newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of new plastered surface and applying three coats of white washing on Soffit of chajjas, fasia etc all as spd and directed.

M & L for applying two coats of synthetic enamel paint over one coat of red oxide or zinc chrome primer over surfaces of steel or iron of any description exc 10 cm width or girth including preperation of new or previously untreated surfaces complete all as specified and directed.

S&F GI tubing tubes "medium grade" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

(a) 15mm bore

(b) 20mm bore

(c) 25mm bore

(d) 32 mm bore

(e) 40 mm bore

(f) 50 mm bore

Refixing old steel tubing and connections in new or old postion obtained from item No 10 to 13 here-in-before (wall/floor/ceilings etc) of following size all as directed.

(a) 15mm bore

(b) 20mm bore

(c) 25mm or 32 mm bore

S & F in repairs vitreous china squatting Pan " Orissa " pattern of size 580 mm X 440 mm white with integral foot rests ( excluding flushing cistern and flush pipe) including provn of cement concrete bedding and connection to trap, and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor complete all as specified and directed. .

S & F in repairs vitreous china wash down water closet pan ( pedesal pattern ), white including connection to drain ( or outgoing pipe ) and to flushing pipe with and including Plastic water closet seat,closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs vitreous china ceramic white Single peice WC (S or P trap) with UF soft close seat cover, hinges, accessories set, size 365 x 655 x 765 mm , Product Code: LYS-WHT-38851SSM of Jaquar or equivalent model of approve make complete all as specified and directed.

S & F in repairs stainless steel kitchen sink without drainage board of 1 mm thick with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete.

S & F in repairs stainless steel kitchen sink with drainage board made of stainless steel 1 mm thick with plugs washers and waste including bedding in cement mortor or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm X 330mm X 160 mm complete.

S & F in repairs wash hand basins, vitreous china of size 550mm X 400mm ( flat back or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of supply & fitting of 32 mm bore waste fittings brass chromium plated with long screwed shanks and fly nuts and waste pipe etc complete.

S&F in repair oval shaped vitreous china WHB table top Coyal snow white, fancy type of 460mm dia, cat No S2020105 of cera or of equivalent model of approved make including 32 mm bore CP waste coupling, PVC waste pipe etc complete all as specified and directed.

S&F in repair oval shaped vitreous china , under/over counter WHB, snow white, fancy type of overall size 560 x 470 mm, cat No S2030104 of cera or of equivalent make specified here-in-after including 32 mm CP waste coupling, PVC waste pipe etc complete all as specified and directed by Engr-in-Charge.

S & F in repairs plastic water closet seat, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges complete all as specified and directed.

S & F in repairs 15 mm bore bib taps,fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs 15 mm bore chromium plated 2 way bib cock fancy type with wall flange complete all as specified and directed.

S & F in repairs 15 mm stop valves, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed.

All as per item no 64 here-in-before but consealed long shank

S & F in repairs 15 mm bore pillar taps,fancy type swan neck spout (Left) and aerator, cat No. F2002104 of cera or of equivalent model of approved make all as specified and directed.

S & F in repairs fancy type sensor pillar tap 15 mm bore chromium plated with control box set with long shunk for table top wash hand basin complete all as specified and directed.

S & F 15 mm bore pillar taps,fancy type cast copper alloy with capstan heads, chromium plated , screwed down high pressure with long screwed shanks and fly nuts, complete all as specified and directed.

All as per item No. 68 here-in-before but fixed in repairs.

S & F in repairs 15 mm bore chromium plated wall mixer (2-in-1) with arrangement for overhead shower complete all as specified and directed.

S & F in repairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, including flush pipe 32 mm dia complete all as specified and directed.

S & F in repairs 15 mm bore, 600 mm long PVC connections with PTMT nuts fixed to iron pipe at both ends complete all as specified and directed.

S & F flush pipe of polyethylene of low or high density or PVC , 32 mm dia for low level flushing cistern/ basins complete all as specified and directed.

S & F stainless steel gratings 100 mm dia with hole for waste pipe complete all as specified and directed.

S & F in repairs chromium plated soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed.

S & F in repairs 125 mm dia brass chromium plated shower rose including shower arm of approved quality complete all as specified and directed.

S & F in repairs CP health faucet including flexible cod complete all as specified and directed.

S & F in repairs CP toilet paper holder complete all as specified and directed.

S & F Transparent Glass 7.5 x 7.5 inch corner bathroom shelves with bracket (set of 2) complete all as specified and directed.

S & F in repairs brass chromium plated Tubular towel rail 20mm dia "D" type 60cm long complete all as specified and directed.

Supply hoisted and fixed in position rotational moulded polyetylene water storage tanks (cylindrical vertical with closed top) of 500 Litres capacity double layered with connecting up pipes including 20 mm bore PTMT ball valve after taking down old u/s tank complete all as specified and directed.

All as per item No 83 here-in-before but 1000 litre capacity.

All as per item No 83 here-in-before but 2000 litre capacity.

M & L for Cleaning of PVC water tank of capacity exc 250 but n.exc 500 ltr and removing all scale and dirt with using bleaching powder , etc, from tanks and from mouths of circulating pipes, etc. including disconnecting existing tanks, and re fixing in position complete all as directed. Note :- Date of cleaning should be writing in synthetic enamel paint of 10cm height using Tensile in format of - "CLEANED ON : DD/MM/YYYY"

All as per item No 86 here-in-before but capacity exc 500 but n.exc 1000 ltr

All as per item No 86 here-in-before but capacity exc 1000 but n.exc 2000 ltr

S & F in repairs 20 mm bore (210 gm weight) ball valves high pressure of PTMT with epoxy coated, aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repairs 20mm bore gun metal gate valves with iron wheel head, screwed both ends for iron pipe of ISI marked complete all as specified and directed.

All as per item No 90 here-in-before but 25 mm bore.

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete including taking down old u/s pipe all as specified and directe.

All as per item No 92 here-in-before but 110 mm bore.

S & F 75 mm bore PVC (SWR) bends any radius complete all as specified & directed.

All as per item No 94 here-in-before but 110 mm bore.

S & F 75 mm bore PVC (SWR) bends any radius provided with access door complete all as specified & directed.

All as per item No 96 here-in-before but 110 mm bore.

M/S NAVNEET S MORDE

Mourya Enterprises

PRASHANT CONSTRUCTION

Suma Construction

Suraj Sukhdev More