Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹30.8 LAccepted-AOC 93 SARASWATI PURAM COLONY SG PGI LUCKNOW UP 226 014 | LUCKNOW | LUCKNOW | UP | 226014 | 1 | Accepted-AOC L-1 | |
| 2 | 2₹33.3 L+₹1.8 L (5.85%)Rejected-Finance GALI NO 5 6 H NO 6 275 JHARODA MAARA EXTN PART III BURARI NEW DELHI 110084 | NEW DELHI | CENTRAL DELHI | DELHI | 110084 | 2 | Rejected-Finance Being other than L-1 | |
| 3 | 3₹33.4 L+₹2.0 L (6.26%)Rejected-Finance | 3 | Rejected-Finance Being other than L-1 | |
| 4 | 4₹33.5 L+₹2.0 L (6.50%)Rejected-Finance | 4 | Rejected-Finance Being other than L-1 | |
| 5 | 5₹34.5 L+₹3.0 L (9.59%)Rejected-Finance | 5 | Rejected-Finance Being other than L-1 |
Tender Value
₹49.7 L
EMD Value
₹99,400
Closing Date
19 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE EAST LUCKNOW
GE EAST LUCKNOW
REPAIR/ MAINT OF OFFRS ACCN IN ZONE G AND PAO (OR) AMC CENTRE AND COLLEGE AREA OF AGE B/R-II UNDER GE (EAST) LUCKNOW
2022_MES_571581_1
GE/E/LKO/T-45 of 2022-23
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
GE EAST LUCKNOW
Please refer Tender documents.
4 documents required · 4 mandatory
₹500
GE EAST LUCKNOW
₹99,400
Yes
24 Feb 2023
27 Dec 2022
21 Jan 2023
27 Dec 2022
19 Jan 2023
7 Jan 2023
Amount
Demolition of PCC as in ground floors & pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L for PCC 1:2:4, type B-0 (using 12.5mm graded stone aggregate) as in roof kebs or mud stops, rounded or chamfered on edges for exposed to weather and cleaning by wire brushes etc complete all as specified and directed
M&L for 40mm thick PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregae) as in floors, finished even and smooth using extra cement, complete all as specified and directed.
M&L for 25mm thick PCC 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregae) as in floors or roof paddings etc complete all as specified and directed.
M&L for PCC 1:3:6, type B-1 (using 20mm graded stone aggregate) as in roof padding, bed plates or mass concrete complete all as specified and directed
M&L for 75 mm thick PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection surface finished fair and even complete all as specified and directed. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exc 3 meter in length and joints shall be provided of 6 mm width and 10 mm depth along the wall and bays and same shall be filled with bitumen mastic (1:3)
M&L for cleaning of all loose dirt and dust from roof surfaces and applying roof treatment as under :- (a) 10 mm thick plastering in CM (1:4) using 100 % coarse sand on roof / parapet walls with WPC @ 2 % by weight of cement. (b) Applying a coat of bitumenous primer @ 0.50 Kgs/Sqm on prepared surfaces and allow to dry. (c ) Applying a coat of hot blown bitumen 85/25 grade @ 1.20 Kgs/Sqm over primer. (d) Suply and laying of 3mm thick (Minimum) polymeric water proofing membrane weighing not less than 3 Kgs/Sqm. (e) Applying a tack coat of hot blown bitumen grade 85/25 @ 1.20 Kgs/Sqm. (f) Blinding with dry coarse sand @ 0.50 to 1.0 Kg /Sqm dusted over bitumen. Note : The net area of water proofing treatment shall be measured without any extra allowance for laps & portion inserted in groove which shall be deemed included in the quoted rates.
M&L plain cement concrete cast in situ 1:3:6, type C-1 (using 20 mm graded stone aggregate) as in copings, hold fast, back filling of pressed steel frame and other similar works including weathering and throating etc including form work complete all as spcefied and directed
Demolition of brick work built in cement mortar including all of quoins, arches, pillers etc. but excluding ashlar facings and precast concrete articles complete all as specified and directed.
M&L for brick work using fly ash brick conforming to IS-12894:2002, non modular, class designation 7.5, straight or curved on plan, exc 6.0 m mean radius, built in CM (1:6) , complete all as specified and directed.
M&L for brick work with fly ash bricks conforming to IS-12894:2002, non modular, class designation 7.5, straight or curved on plan to any radius in half brick thick walls in CM 1:4, bedded, jointed and flush pointed in same mortar, complete all as specified and directed.
Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including taking dowl tiles wherever required including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar 1:6 on surfaces other than fair face of brick work of walls, finished even & smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, mixed with water proofing compound (ISI marked) @ 3% by weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified and directed. (Note : - water proofing compound shall be measured and paid for separately).
M&L for rendering 5 mm thick in CM 1:3 on fair faces of concrete surface of ceiling and finishing the surface even and smooth without using extra cement, complete all as specified and directed.
Supply only integral water proofing compound complete all as specified and directed.
Supply only Liquid water proofing compound complete all as specified and directed.
M&L for preparation of new or previously undercoated surface of wall and applying three coats of white wash on wall, complete all as specified and directed.
M&L for applying two coats of oil bound distemper over a coat of primer over and incuding white wall putty after complete removal of existing treatment on old plastered surface including necessary preparation complete all as specified and directed
M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint over one coat of primer, complete all as specified and directed.
M&L for preparation of new or previously undercoated surface of wall and applying three coats of white wash in ceiling, complete all as specified and directed.
Complete removal of existing treatment from wall and applying one coat of wall care putty min 1 mm thick to make surface even and smooth, complete all as specified and directed.
M&L for preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces or putty surafaces and applying two coat of oil emulsion distemper (OBD) of approved shade/tint complete all as specified and directed.
M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash on wall complete all as specified and directed.
M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coat of white wash on wall complete all as specified and directed.
M&L for preparation of old surfaces (plastered or unplastered) including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash on ceiling complete all as specified and directed.
M&L for preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil emulsion distemper (OBD) of approved shade/tint complete all as specified and directed.
Taking down chowkhat with shutter (without taking off shutter from the frame) area exc 1.5 sqm but not exc 4 sqm each, complete all as specified and directed.
Taking down chowkhat with shutter (without taking off shutter from the frame) area not exc 1.5 sqm each, complete all as specified and directed.
Taking down shutters of any description not exc 1.0 sqm each complete all as specified and directed.
Taking down shutters of any description exc 1.0 sqm but not exc 2.0 sqm each complete all as specified and directed.
Taking down shutter of any description exc 1 sqm and not exc 2 sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws complete all as specified and directed.
S&F 2nd class hard wood (sal) plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
S&F pressed steel frame for door with one or more rebates of size 125x60mm including necessary fixing lugs, lock striking plates, hinges, hold fast etc. including filling with concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) complete all as spcefied and directed.
S&F pressed steel frame for door with one or more rebates of size 105x60mm including necessary fixing lugs, lock striking plates, hinges, hold fast, etc. incl filling with concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) complete all as spcefied and directed.
S&F 32mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F 35 mm thick of second class hardwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkat complete all as specified and directed.
S&F of factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in clause 8.24 (a)of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkhat, complete all as specified & directed.
S&F of factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube & fixing in opening as per specification & drawing complete all as specified and directed.
Taking down and refixing in same opening of aluminum door shutter of area exc 1.00 sqm but not exc 2.00 sqm including necessary repair with replacement of rubber beading, and other small articles such as cleats, hinges, screws etc complete all as specified and directed
S&F aluminium anodized door with frame of size 100X44.5X 1.5mm, stile, middle and top rails of size 82X44.5X1.5mm thick and bottom rail of size 114X44.5X1.5mm thick including 5.5mm thick tinted glass panes with all fittings/ fixtures such as cleats, tower bolt, hinges, locking arrangement, pull and push handle of aluminium anodized, hydraulic door closer etc., complete including aluminium and rubber beading after taking down old aluminium door complete all as specified and directed.
S&F of factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed together with solvent cement complete all as specified and directed.
S&F for steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed and welded, complete all as specified and directed.
S&F for steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay complete without glazing bars, dovetailed and welded, complete all as specified and directed.
S&F for steel ventilator with top hung shutter including box type hinges, peg stay and glazing bars complete with dovetailed or welded, complete all as specified & directed.
S&F 300 mm long, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.
S&F in repair 250 mm long aluminum alloy, anodised sliding door bolts, plate type, ,and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminum alloy complete all as specified and directed
S&F in repair 300 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.
S&F in repair 300 mm long, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.
S&F 200mm long aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed.
S&F in repair 200mm long aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed.
S&F 150 mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed.
S&F in repair 150 mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed.
S&F 100 mm long, fancy type, stainless steel handles, complete all as specified and directed.
S&F in repair mild steel handles 150 mm for steel windows, left/right, and fixed by welding or screws as required complete all as specified and directed.
S&F butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.
S&F in repair butt hinges of size 100mm medium weight, cold rolled mild steel ISI marked complete all as specified and directed.
S&F mild steel holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming to Grade E-165 (Fe 290) including necessary welding etc. complete all as specified and directed.
S&F mild steel helical door spring 250mm ordinary rat tail rod pattern spring including roller and roller plate including fixing by welding or any other means as required complete all as specified and directed.
S&F in repair mild steel helical door spring 250mm ordinary rat tail rod pattern spring including roller and roller plate including fixing by welding or any other means as required complete all as specified and directed.
S&F in repair motice locks of brass, 4 lever, 100 mm size, vertical type complete all as specified and directed.
S&F hasp and staple, 100 mm stainless steel, fancy type, including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&f in repair 140 mm floor door stopper of aluminium alloy body and tongue,anodised with hard drawn steel spring complete all as specified and directed
S&F in repair 100 mm size floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S&F in repair 40 mm wide and 8-10 mm thick rubber beading for doors complete all as specified and directed.
S&F in repair 18/19 mm thick Pre-laminated particle boad, exterior grade, laminated on both side with decorative choice lamination, complete all as specified and directed.
S&F in repair block board, 19/20 mm thick, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame work complete all as specified and directed.
M&L for 0.90mm thick decorative laminates 'Mica type 1 of surface finished,colour and pattern as approved, fixed with adhesive as per manufacturer's instructions complete all as specified and directed.
M&L 2nd class hard wood, wooden beading, plain fillets, square or rectangular or tringular in section clean sawn sectional area exc 3 sqcm but not exc 6 sqcm fixed with nail complete all as specified and directed.
M&L 2nd class hard wood, plain fillets, square or rectangular or tringular in section clean sawn sectional area not exc 3 sqcm fixed with nail, complete all as specified and directed.
S&F continuous piano hinges, mild steel bright finished or electro galvanized, with 30mm wide flap when open complete all as specified and directed.
S&F in repair continuous piano hinges, mild steel bright finished or electro galvanized, with 30mm wide flap when open complete all as specified and directed.
S&F magnet catcher for cup board shutter complete all as specified and directed.
M&L for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified & directed.
M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer on surfaces of any description over 10 cm width or girth, not oterwise described, complete all as specified and directed.
M&L for preparation of old painted surface of wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old painted surface of wood based materials of any description over 10cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old painted surface of steel or iron work of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for complete removal of exisiting finish (with mechanical sander machine) on walls and applying plaster of paris putty of min 1 mm thickness to prepare the surface even and smooth and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as speciifed. Note:- Paint to be applied with airless spray machine .
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads (exc 1.5 sqm) complete all as specified and directed
S&F 3mm thick sheet glass ordinary quality & glazing with oil putty or wooden beads in square area not exc 0.5 sqm in each pane, complete all as specified and directed.
S&F 3mm thick sheet glass frosted or obscured one side and glazing with oil putty or wooden beads in square area not exc 0.5 sqm in each pane complete all as specified and directed.
S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixing with stainless steel wire staples including taking down mild steel frame and refixing mild steel frame with new wire mesh with tinned tack/by welding in steel window and ventilators and making good the disturbed portion during execution of work, complete all as specified and directed.
S&F 0.56 mm plain aluminium sheeting alloy 31000H4 in straight flashing of WC/bath door complete all as specified and directed.
S&F in repair mild steel, drapery rods, coloured, standrad quality, PVC coated not less than 25mm dia with heads/finial at both ends, clamps etc complete all as specified and directed.
S&F in repair stainless steel, fancy type, drapery rods, standard quality not less than 25mm dia with heads/ finial at both ends and clamps etc. complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S&F rolled steel section as in main and cross beams, hip and jack rafters, purlin where connected to common rafters and similar works conforming to grade Fe 410-W (Gde-E-250 quality A) complete all as specified and directed.
S&F 2mm thick fibre glass reinforced translucent corrugated sheet as in roofing with two corrugated side lap fixed with ‘L’ type or ‘J’ type hooks or cranked bolts including dismantling of existing AC sheet (corrugated, semi corrugated etc) as in roofs etc including ridges complete all as specified and directed.
S&F in repair galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc. complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating base corrugated steel sheets 0.50mm thick of any approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, including dismantling of existing AC sheet (corrugated, semi corrugated etc) as in roofs etc including ridges complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
M&L for non skid coloured ceramic edge cut digital tiles 7 to 8 mm thick (square/ rectanglar) area of each tiles exc 0.11 sqm but not exc 0.18 sqm as in floor over and including screed bed 15mm thick in CM 1:6 for laying floor finishes etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete, all as specified and directed.
M&L for coloured glazed ceramic edge cut digital tiles 600x300 x 7 mm thick on vertical surfaces such as skirting/dado over and including 10mm thick rendering in CM 1:3 complete all as specified and directed.
M&L for digital vitrified ceramic tiles 10mm thick (square/ rectangular), joint free, polished, coloured (dark shade as approved), area of each tile not exc 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:4 complete all as specified and directed.
All as per item No 96 above but on vertical surface over & including 10mm thick rendering in cement & sand mortar 1:3
S&F GI tubing 15mm bore medium grade with all fittings fixed to wall, ceiling or laid in floor including taking up or down of existing steel tubing and connections complete all as specified and directed.
S&F GI tubing 20mm bore medium grade with all fittings fixed to wall, ceiling or laid in floor including taking up or down of existing steel tubing and connections complete all as specified and directed.
Cutting chases, pinning in brick walls for concealed water tubing making good to facings where required and pointing in CM 1:3 cutting not exc 10 cm girth complete all as specified and directed.
Cleaning and removing all scale and dirt etc from tank and mouth of circulating pipe and refixing of capacity exc 250 not exc 500 ltrs complete all as specified and directed.
Cleaning and removing all scale and dirt etc from tank and mouth of circulating pipe and refixing of capacity exc 500 not exc 1000 ltrs complete all as specified and directed.
S&F of 500 Litre capacity rotational moulded polyethylene water storage tanks double layered white in colour (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc including dismantling of any type of existing water tanks of capacity exc 250 Ltr & not exc 500 Ltr and removing from site complete all as specified & directed.
S&F of 1000 Litre capacity otational moulded polyethylene water storage tanks double layered white in colour (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc including dismantling of any type of existing water tanks of capacity exc 250 Ltr & not exc 500 Ltr and removing from site complete all as specified & directed.
S&F 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified & directed.
S&F in repair 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified & directed.
S&F in repair 15 mm PTMT float valve, high pressure with Polythene float and flynut complete, screwed for Iron pipe etc all as specified.
S&F in repair of 20 mm bore gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with plastic WC seat cover (white) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device, complete all as specified and directed.
S&F in repair vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E-2 in filling, making good to floor, complete all as specified and directed.
S&F in repair vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6, type C-1 blocks of size 10x7.5x15cm, and including 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified and directed.
S&F in repair plastic water closet seat cover black/white, closed pattern with flat bottom & cover and aluminum anodised hinging device complete all as specified and directed.
S&F in repair aluminium (Die cast body) hydraulic door closer regulated designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width complete all as specified and directed.
S&F in repair PVC valveless syphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified and directed.
S&F in repair toilet paper holder, brass chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.
S&F in repair CP soap dish, superior quality, fixed to plugs with chromium plated (CP) brass screws complete all as specified and directed.
S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed on wall with PVC rawl plug & cadmium plated brass screws, complete all as specified & directed.
S&F in repair long body 15 mm bore bib tap,cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.
S&F in repair 15mm dia C P stop valve/angle cock chromium plated with curtch or butterfly handle screwed down, screwed for iron pipe of brass ferrule complete all as specified & directed.
S&F in repair 15mm bore fancy type pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes complete all as specified and directed.
S&F in repair tubular towel rail, aluminium anodized, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified and directed.
S&F in repair towel ring brass chromium plated with flange fixed on wall with PVC rawl plug & cadmium plated brass screws complete all as specified and directed.
S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.
S&F PVC connection of 15mm bore, 600mm long with brass coupling on both ends of superior quality complete all as specified and directed.
S&F in repair PVC bath cabinet with 4mm thick looking mirror of overall size 560x410mm, complete all as specified and directed.
S&F in repair shower health faucet to EWC ,CP brass with minimum 1500mm long CP flexible pipe, connection etc complete all as specified and directed.
S&F in repair of aluminium anodised six peg hanger of size 300 mm long of extruded section & fixed in positions complete all as specified and directed.
S&F in repair peg set of 6 brass fancy type, complete all as specified and directed.
S&F 15 to 18mm thick granite stone slab (any shade) including grinding moulding and polishing as in floor/plate form fixed over and including 15mm thick screed in CM 1:4, complete all as specified and directed.
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F in repair sinks without drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F 32mm dia PVC waste pipe approx 450mm long for sink/WHB, complete all as specified and directed.
S&F in repair stainless steel kitchen plate rack made of 0.80mm thick sheet of size 750x600x250mm and fixed to wall, complete all as specified and directed.
S&F in repair chromium plated brass single hole basin mixer with hot and cold arrangement with long shank and cup suitable for 15mm bore pipe complete all as specified and directed.
S&F in repair chromium plated brass single hole wall mixer with hot and cold arrangement with long shank and cup suitable for 15mm bore pipe complete all as specified and directed.
S&F in repair brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified and directed.
S&F in repair glass corner shelf assembly, fancy type, made of 6 to 7mm thick sheet glass of size 250x250mm, fixed with CP brackets, complete all as specified and directed.
S&F in repair kitchen cabinet shutter with frame including shelves,drawer made of solid PVC Block board18/ 19 mm thick both sides decorative face having smooth outlet integral skin are made and shall be fixed to walls using required size sheet metal screw and solvent adhesive vertical and horizontal profile made of PVC 18/19mm solid board profile as per manufacturer's instruction complete all as specified and directed.
S&F mild steel framed work as in doors/gates/steel frames/chowkats etc. of angle or other section with gusset plates, rails, braces, grill etc, complete conforming to Grade E-165 (Fe 290), drilled for fixing of steel sheeting or other covering including necessary welding complete all as specified and directed.
S&F 50 micron powder coated aluminium anodised frame/chowkat of Aluminium door /ventilator section of 100x44x1.60to1.8 mm thick fixed with rawal plug and screw or wire expansion hold fasteners complete all as specified and directed.
S&F anodized 50 micron powder coated aluminium door shutters,, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21, 100mm long (3 Nos), suitable handle (2 No.), hydraulic door closer etc complete all as specified & directed.
S&F 50 micron powder coated anodized aluminium sliding window with section of size 88x44.45x1.5mm with one or more rebate (consisting 03 no shutter with track) consisting of 5mm thick reflective glass incl fixing aluminium shutter having top and bottom rail size 112mmx37mmx1.5mm incl jointing cleats, glazing rubber packing aluminium beading channel screw complete all as sepcified and directed.
S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane complet all as specified and directed
S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and directed
S&F 50 micron powder coated for aluminium anodized grill size 6mm dia of aluminium bar mesh size75mmx75mm and fixed to aluminium window ventilator complete, all as specified and directed.
S&F stainless steel kitchen plates fixed to lower mould of drawer of size 21"x20"x04" complete all as specified and directed. (Note:-Thickness of plates as per manufacturer instruction)
S&F stainless steel cutlary having size 21"x20"x04" complete all as specified and directed. (Note:-Thickness of plates as per manufacturer instruction)
S&F mild steel sliders of size 21" for facilatate to drawer slide on steel ball bearing ,fixed with screw/nut and bolts complete all as specified and directed.
Demolition of reinforced cement concrete in floors, beams, chajjas, beam etc complete all as specified and directed.
M&L RCC 1:2:4, type B-1 (using 20 mm graded aggrigate) as in slab,chajjas,beam etc including demolition of reinforced cement concrete in floors, beams, chajjas, landing slab in any position or height and similar suspended works complete all as specified and directed.
Form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exc 200mm thick complete all as specified and directed.
M&L for 10mm dia and over deformed bars, cut to length, bent ot shape required, including cranking, bending , hooking ends and binding with and including mild steel wire(annealed not less than 0.9mm dia) including welding,rivetting etc complete all as specified and directed.
Repair of Chajjas by completly removing old broken plasters or pieces of concrete and dubbing out with cement mortar 1:4 or by cement concrete 1:2:4 (12.5 mm graded aggregate) including necessary formworks and GI wire netting 0.90 mm dia and 12 mm mesh for propper bonding of concrete/ mortar and finally finishing the surface smooth and even w/o using extra cement and applying the finish matching from the neighbouring areas complete all as specified and directed.
Demolition and breaking up or taking down PVC/AC/CI/SSW drain pipes of 100 mm bore , set in cement mortar including PCC haunching and bedding, complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed.
S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.
S&F 75 mm PVC (SWR) floor trap, plain with CP grating, with or without hole including jointing with solvent cement complete all as specified and directed.
Repair of iron gates, window frames and similar articles by welding complete all as specified and directed.
S&F in repair 100 mm CP gratings with or without hole, fixed with white cement complete all as specified and directed.
S&F 110mm bore PVC (SWR) bend, any radius, complete all as specified and directed.
S&F in repair 110mm bore PVC (SWR) bend, any radius, complete all as specified and directed.
S&F 75mm bore PVC (SWR) bend, any radius, complete all as specified and directed.
M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified.
Taking down cement plaster on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc but lime plaster any description complete all as specified and directed
M&L for 20 mm thick cement plaster in CM (1:3) mixing an integral waterproofing compound @ 100 gms per bag of cement over 1st coat of acrylic polymer modified cementations waterproofing coating, including 2nd coat of acrylic polymer modified cementations waterproofing coating, finished the surface even and smooth without using extra cement including necessary scaffoldings complete upto G+2 floor buildings complete all as specified and directed.
Dismantling of old ceiling boards any type and any thickness including cover fillets/ aluminum snap grid complete all as specified and directed
M&L false ceiling with 4 mm thick E-board white prelaminated set embossed reinforced designer ceiling board of approved tetxure fixed with GI imposed grid frame work of size not more than 600 x 600 mm having 24 mm wide T- section, runner made of 0.33 mm GI sheet and angle made of 0.45 mm GI sheet, suspended with 2 mm dia GI wire including two coat of oil bound distemper complete all as specified and directed
S&F in repair 20 to 25mm bore PVC Coated fancy type curtain rod with fixing brackerts, stops, rollers etc complete all as specified and directed.
S&F cooler stand framed/fabricated of MS angle or other mild steel section complete including welding and fixing to brick walls with cement concerete type B-1, 1:2:4 (20 mm graded aggregates) complete upto three storey height of building complete all as specified and directed
S&F in repair 32mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement complete all as specified and directed.
S&F in repair 32 mm bore Low density PVC flexible pipe for Wash hand basin/sink etc complete all as specified and directed.
S&F 32 mm bore Low density polyethylene pipes for urinal etc complete all as specified and directed.
Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc for taking credit including making good the disturbed surfaces to match with the existing complete all as specified and directed.
Material and labour for one light / fan point controlled by one, one way switch 06 Amp wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick with 3 mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed.
All as per serial item No 179 here-in-before but one 3 pin, 06 Amp socket outlet point on independent board controlled by one, one way switch 06 Amp.
All as per serial item No 179 here-in-before but one 3 pin, 06 Amp socket outlet point on same board controlled by one, one way switch 06 Amp.
All as per Serial Item No 179 here-in-before but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 1.5 Sqmm single core FRLS cable for one 3 pin 16 Amp socket out let point controlled by one, one way switch on independent board complete all as specified and directed.
S&F in repair switch piano flush type, 06 Amp, single pole, one way, 230 Volt complete all as specified & directed.
S&F in repair socket outlet 2 in 1, 5 pin, 06 Amp, flush type, 230 volt complete all as specified & directed.
S&F in repair switch socket combination outlet 2 in 1, 3 pin, 06 Amp and 16 Amp flush type, universal, 230 volt, four hole complete all as specified & directed.
S&F in repair electronic ceiling fan regulator with rotary step, two module, humfree, AC, 240 volt, 100 Watt and duly ISI marked complete all as specified & directed.
S&F in repair lamp holder, PVC / Polycarbonate type with back plate suitable for batten fitting complete all as specified & directed.
S&F in replacement of single side connection LED T8 tube light rod 20 Watt, 6500K of four feet long into and including LED tube light fixture of four feet long with T8 push fit type holders, connector block, end caps, etc including connecting up complete all as specified and directed. Make : Crompton, Cat No : IGP131LT8-16& LT8-20-865-2 or equivalent in Havells, Cat No : REGALBATTENT8UPT01X22WSSBS & PHOTONULTRA1213T8SSTL20WLED865SPC,philips cat no TMC 100 1xT LED /MAS LED tube 1200 mm 18 w 865 T8 I - 2100 Lumen
Supply and fix in replacement of single side connection LED T8 tube light rod 20 Watt, 6500K of four feet long into existing T8 conventional fluorescent tube light fitting after changing the necessary electric connections as required at site complete all as specified and directed. Make : Crompton, Cat No : LT8-20-865-2 , Havells, Cat No : PHOTONULTRA1213T8SSTL20WLED865SPC, PHILIPS Cat no MAS LED tube 1200 mm 18 w 865 T8 I - 2100 Lumen
S&F in repair ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25 mm size complete all as specified & directed.
Material and labour for sub main wiring with 06 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.
Material and labour for sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.
S&F in replacement of MCB, SP, AC, 240 volt of 06 to 32 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.
S&F in replacement of MCB, DP, AC, 240 volt of 32 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.
S&F in replacement of unserviceable wire of size 1.5 sqmm with PVC insulated FRLS multistranded copper conductor for working Voltage 1100 Volts single core of 1.5 sqmm complete all as specified & directed.
S&F in replacement of unserviceable wire of size 2.5 sqmm with PVC insulated FRLS multistranded copper conductor for working Voltage 1100 Volts single core of 1.5 sqmm complete all as specified & directed.
S&F in replacement of recessed mounted 2'x2' LED ceiling light fitting 36 watt, 6500K, with IP 20 protection comprises of CRCA housing, high efficiency diffuser cover, electronic driver, etc and all accessories pre-wired including connecting up complete all as specified and directed. Make : Crompton, Cat No : LCPL-36-CDL(2X2)or equivalent in Havells, Cat No : VENUSNEOHE2X2PLR36WLED8XXS philips cat no RC380BLED36-6500G4L60W60 PSU OD OC.
S&F ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed
S&F wall fan of 400 mm sweep, 220 - 240 volts, AC, 50 Hz 1330 RPM, 55 Watts power input, air delivery 65 Cum/min with all accessories complete all as specified & directed.
S&F exhaust fans single phase 230/240 Volts heavy duty metalicbody of size 300 mm sweep 1400 RPM ISI marked, and making connection with twisted copper flexibelwire 23/0.076 mm complete all as specified & directed.
S&F in replacement of PLL 17/18 Watts suitable for 2x2 recessed type fittings with replacement of 36 Watts PLL lamp complete all as specified & directed.
S&F LED bulb 9/10 W B22 CDL complete all as specified & directed.
Taking down ceiling fan/exhaust fan any size any make, sealing cable ends, dismantling blades in case of ceiling fan and removing fan and blades to E/M store yard for repair & hanging/fixing of the same after repair and connecting up complete all as specified & directed.
M&L in replacement of ball bearing of size 6201/6202/6203 as required,complete all as specified & directed.
S&F in replacement of Capacitor 2.5 Mfd in ceiling fan of any size, exhaust fan of size 300/230mmsize and cabin fan of 400mm sweep, complete all as specified & directed.
Rewinding of Ceiling/ Exhaust/ Cabin fans and pedestal fans comprising of followings:- (a) Rewinding of stator with supper enameled copper wire (gauge of wire shall be same as provided by the manufacturer) including varnishing the new winding wire with quick dry varnish properly. (b) Replacement of defective worn out bush where required, (ball bearing, capacitor will be measured and paid separately). (c) Oiling/greasing and reassembling the fans with new split pin, check nut, locking bolt, washer, holder clip and connector including providing new twisted twin core flexible copper cable of size 23/0.0076 of 1 Mtr length. (d) Testing of repaired fan shall be carried out in the yard of AGE E/M (East) to the entire satisfaction Ceiling fan of 1200 mm Sweep.
All as per Item No 206 above Exhaust fan 380 mm (15”) Sweep.
All as per Item No 206 above Cabin fan 400 mm Sweep .
QUALITY CONSTRUCTIONS CO
ANIL CONSTRUCTION
M/S SWATI CONSTRUCTION
JITENDRA SINGH
PARAMOUNT ENGINEERS
M/s Bipin Construction
R K CONTRACTOR AND SUPPLIERS
m/s raghubar dayal
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .