Construction of compound wall and first floor building to the community hall at Thomas Arul Thidal Madhady Karaikal

Amount

2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms , lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m -All kinds of soil.

15.3 Demolishing R.C.C. work, including stacking of steel bars and disposal of unserviceable material within 50 metres lead.

5.2.2 Reinforced cement concrete work in walls (any thickness), including attached pilasters , buttresses, plinth and string courses , fillets, columns , pillars, piers, abutments, posts and struts etc.upto floor five level excluding cost of centering, shuttering,finishing and reinforcement:1:1.5:3 (1 cement : 1.5coarse sand : 3 graded stone aggregate 20mm nominal size)

5.3 Reinforced cement concrete work in beams , suspended floors, roofs having slope upto 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size).

5.9.6 Centring and shuttering including strutting, propping etc. and removal of form for: columns, pillars, piers, abutments,posts and struts.-

5.9.3 Centring and shuttering including strutting, propping etc. and removal of form for : suspended floors, roofs, landings , balconies and access platform .

5.9.5 Centring and shuttering including strutting, propping etc. and removal of form for: lintels, beams, plinth beams, girders, bressumers and cantilevers.

5.22.6 Steel Reinforcement for R.C.C work including straightening , cutting , bending , placingin position and binding all complete -Thermo - Mechanically treated bars (TISCON/ VIZAG / IISCO /SAIL / JSW) Fe - 415 or more.

6.1.2 Brick work with common burnt clay F.P.S. (non modular ) bricks of class designation 7.5 in foundation and plinth in - cement mortar 1:6 (1 cement : 6 coarse sand)

6.4.2 Brick work with common burnt clay F.P.S. (non modular ) bricks of class designation 7.5 in superstructure above plinth level upto floor V level in all shapes and sizes in cement mortar 1:6 (1 cement : 6 coarse sand)

6.13.2 Half brick masonry with common burnt clay F.P.S. (non modular ) bricks of class designation 7.50 in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 cement: 4 coarse sand)

6.4.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V level in all shapes and sizes in cement mortar 1:4 (1 cement : 4coarse sand)

6.8 Brick work 7cm thick common burnt clay F.P.S. (non modular) brick of class designation 7.5 in cement mortar 1:3 ( 1cement : 3 coarse sand ) in superstructure above plinth level and upto floor five level

9.1.2V Providing wood work in frames of doors , windows, clerestory windows and other frames , wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) -Vengai wood.

9.5.1.1V Providing and fixing panelled or panelled and glazed shutters for doors, windows, and clerestory windows, including ISI marked M.S.pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately , all complete - Vengai wood -35 mm thick shutters

9.7.1V Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves orebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick: Vengai wood.

9.53 Providing 40x5 mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

21.1.2.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions , i.e at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling , C.P.brass / stainless steel screws , all complete as per architectural drawings (Glazing, paneling and dash fasteners to be paid for separately) - for shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (fittings shall be paid for separately) - Powder coated aluminium (minimum thickness of powder coating 50 micron)

21.3.2 Providing and fixing glazing in aluminimum door, window, ventilator shutters and partitions etc., with EPDM rubber / neoprene gasket etc., complete as per the architectural drawings. (cost of aluminimum snap beading shall be paid in basic item) : With float glass panes of 5.50mm thickness.

9.48.2 Providing and fixing M.S.grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc . all complte - fixed to openings / wooden frames with rawl plugs screws etc.

4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:5:10 (1 cement:5coarse sand : 10 graded stone aggregate 40mm nominal size)

2.27 Supplying and filling in plinth with river sand under floors including, watering, ramming consolidating and dressing complete.

13.16.1 6mm cement plaster of mix 1:3 (1 cement : 3 fine sand).

13.1.1 12mm cement plaster of mix :Cement mortar 1:4 (1 cement : 4 fine sand)

17.13.2 Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern WC pan of size 580 x 440 mm.

17.25.2 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings flat back wash basin of size 550 x 400mm

17.32.1 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing circular shape 450mm dia.

12.41.2 Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS :5382 leaving 10mm gap for thermal expansion, (i) single socketed pipes. 110mm diameter.

12.42.3.2 Providing and fixing on wall face unplasticised- PVC moulded fittings /accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Single Tee with door 110X110X110mm.

12.42.5.2 Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. 87.5 deg1 10mm bend

12.42.6.2 Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Shoe (plain)110mm shoe.

12.43.2 Providing and fixing unplasticised - PVC clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4(1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm

9.70.1 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc.complete: - 125x64x1.90mm

9.96.1 Providing and fixing aluminium sliding door not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws etc.complete:- 300x16mm

9.97.2 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc.complete :-250x10mm

9.100.1 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc.complete :-125mm

11.41.2A Providing and laying fully vitrified floor tiles of size 600x600cm (thicknes to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS: 15622 of approved make (Nitco / Rak / Johnson / Asian) in all colors and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600mm.

11.38.1 Providing and laying ceramic glazed floor tiles of size 300 x 300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS :15622, of approved make (Nitco / Kajaria ) in all colours, shades, except white , ivory, grey, fume red brown, laid on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand), including pointing the joints with white cement and matching pigments etc., complete

11.36A Providing and fixing 1st quallity ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make (Jhonson / Asian / Somany / Nitco) in all colours, shades of size 200 x 300 mm as approved in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm. Including pointing in white cement mixed with pigment of matching shade complete. size 200x300mm.

18.7.3 Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step CPVC solvent cement and testing of joints complete. (Internal work exposed on wall) - 25mm nominal outer dia pipes

18.15.1 Providing and fixing brass bib cock of approved quality - 15 mm nominal bore.

18.17.1 Providing and fixing gun metal gate valve with CI wheel of approved quality (screwed end) - 25 mm nominal bore.

18.18.3 Providing and fixing ball valve (brass) of approved quality complete. high or low pressure with plastic floats - 25 mm nominal bore.

18.48A Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet outlet and overflow pipes but without fittings and the base support for tank-circular tank.

16.95 Providing and laying ceramic glazed floor tiles of size 300 x 300 mm (thickness to be specified by the manufacturer) , of 1st quality conforming to IS :15622, of approved make (Nitco / Kajaria ) in all colours, shades, except white , ivory, grey, fume red brown, laid on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand), including pointing the joints with white cement and matching pigments etc., complete

13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacturer on wall surface - water thinnable cement primer

13.60.1B Wall painting with plastic emulsion paint Premium of approved brand and manufacture to give an even shade - two or more coats on new work

13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade - Two or more coats on new work.

14.54.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade - One or more coats on old work.

1.1.1.2 Supplying and fiixng of following size of PVC conduit alongwith the accessories in surface / recess conduct including cutting the wall and making good the same in case of recessed conduit as required. Make : Avonplast / Vijaya : - 25 mm dia

1.1.3.4.4 Supplying and fixing of following size of PVC deep junction box in required position along the line of PVC conduit as required .Make:Avonplast/Vijaya:- 25mm deep Junction Box four way

1.1.3.2.3 Supplying and fixing of following size of PVC junction box in required position along the line of PVC conduit as required. Make:Avonplast/Vijaya:- 25mm Junction Box three way

1.7.2.1 Supplying and fiixng 3 plate, 5 amp ceiling rose on the existing switch box / cover including connections etc., as required, Make : Kundan/Anchor/Vinay:

1.3.17 Supplying and fixing of the following sizes of Teak wooden board on recess including cutting the wall and finishing the surface good the same as required - 375mm X 300mm X 50mm. Deep

1.3.8 Supplying and fixing of the following sizes of Teak wooden board on recess including cutting the wall and finishing the surface good the same as required - 250mm X 200mm X50mm. Deep

1.6.17 Providing and fixing of following size phenolic coated sheet on existing wooden board: - 375mm X 300mm X 3mm Thick

1.6.7 Providing and fixing of following size phenolic coated sheet on existing wooden board: - 250mm X 150mm X 3mm Thick

1.5.1 Supplying and drawing of 1.5 sqmm. FR PVC insulated, coper conductor, single core cable in the existing surface / recessed, PVC / steel conduit / PVC casing and capping as required. Make : Finolex / Polycab:-

1.5.2 Supplying and drawing of 2.5 sqmm. FR PVC insulated, coper conductor, single core cable in the existing surface / recessed, PVC / steel conduit / PVC casing and capping as required. Make : Finolex / Polycab:-

1.5.3 Supplying and drawing of 4.0 sqmm. FR PVC insulated, copper conductor, single core cable in the existing surface/recessed, PVC/steel conduit/PVC casing and capping as required.Make: Finolex/Polycab:-

1.7.1.1 Supplying and fixing S.P 1 way 5/6amps piano/flush type switch on the existing switch box/cover including connections etc. as required. Make: Kundan /Anchor/Vinay :-

1.7.1.3 Supplying and fixing 3 pin 5/6amps piano/flush type socket outlet on the existing switch box/cover including connections etc. as required. Make: Kundan /Anchor/Vinay:-

1.7.1.4 Supplying and fixing S.P 1 way 15/16amps piano/flush type switch on the existing switch box/cover including connections etc. as required. Make: Kundan /Anchor/Vinay:-

1.7.1.6 Supplying and fixing 3 pin 15/16amps piano/flush type socket outlet on the existing switch box/cover including connections etc. as required. Make: Kundan /Anchor/Vinay:-

2.2.2.1 Supplying and fixing 6 amps to 32 amps rating ,Single pole,240 volts,'c' series,miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make:ABB/L&T Hager

2.1.3 Supplying and fixing following way single pole and neutral,sheet steel, MCB distribution board, 240volts, on surface/ recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized a complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powdered painted including earthing etc as required:(But without MCB /RCCB/Isolator) Make:Siemens/ABB/L&T Hager. 8 Way - SPN,double door,MCB DB

3051 & 3112 1 x 40W box type single tube light fitting with copper choke & starter with tube. Make: Philips/Bajaj

3116 Supply of 25w CFL lamp for pendent holder. Make: Philips

3127 1200mm sweep double ball bearing ceiling fan. Make:Almonard/Usha

1.7.1.15 Supplying and fixing Step type socket Fan Regulator on the existing switch box/cover including connections etc. as required. Make:Kundan/ Anchor/Vinay:-

3053 Supplying and fixing of 1x36w/40w single tube street light fittings with sheet aluminium housing and UV stabilized acrylic cover Make. Philips/Bajaj.

9.118.3 Providing and fixing to existing door frames - 25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm x 25 mm or less as per requirement with an average wall thickness of 1 mm (+ or - 0.3mm ). PVC foam end cap of size 23 x 10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. An M.S.tube having dimensions 19 mm x 19 mm and 1.0 mm (+- 0.1mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end -cap of the size 25 mm x 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer's specification to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places.

9.119 Providing and fixing factory made P.V.C. door frame of size 50x 47 mm with a wall thickness of 5mm , made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 nos , of 150mm long brackets of 15 x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19 x19 mm M.S.square tube of 19 gauge , EPDM rubber gasket weather seal to be provided through out the frame . The door frame to be fixed to the wall using M.S.screws of 65 / 100 mm size, complete as per manufacturter's specification

9.165.1A Providing and fixing of 65mm Godrej Navatal lock of 6 levers etc complete

21.3.3 Providing and fixing glazing in aluminium door, window ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings ( cost of aluminium snap beading shall be paid in basic item) - with float glass panes of 8 mm thickness

11.3.1 Cement concrete flooring 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete - 40mm thick with 20mm nominal size stone aggregate

9.17.1 Providing and fixing flat Pressed 3 layer particle board medium density exterior grade (Grade 1) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames , backing or studding to be paid separately) - 12mm thick

K.R. NAGENDIRAN

P.VENGADESAN

SRI HARSHA BUILTTECH PRIVATE LIMITED