Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹69.8 LAccepted-AOC 1 206 SHOP NO 71 MANDIR MARKET SADAR BAZAR DELHI CANTT 110010 | DELHI CANTT | NEW DELHI | DELHI | 110010 | L1 | Accepted-AOC L1 | |
| 2 | L2₹75.1 L+₹5.3 L (7.52%)Rejected-AOC N A | NA | NA | 121004 | L2 | Rejected-AOC Other than L1 | |
| 3 | L3₹77.5 L+₹7.7 L (11.0%)Rejected-AOC D 662 WZ 1598 R 1 NANGAL RAYA NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L3 | Rejected-AOC Other than L1 | |
| 4 | L4₹78.8 L+₹9.0 L (12.9%)Rejected-AOC WZ 199 LAJWANTI GARDEN GALI NO 4 NEW DELHI 110046 | NEW DELHI | DELHI | 110046 | L4 | Rejected-AOC Other than L1 | |
| 5 | L5₹79.8 L+₹10.0 L (14.3%)Rejected-AOC C 9 53 IIND FLOOR SECTOR 08 ROHINI DELHI 110085 | DELHI | NORTH WEST DELHI | DELHI | 110085 | L5 | Rejected-AOC Other than L1 |
Tender Value
₹80 L
EMD Value
₹1.4 L
Closing Date
3 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE NO 2 DELHI CANTT-10
HQ CWE NO 2 DELHI CANTT-10
PROVN OF CERTAIN SANCTIONED WORKS AT DCN SUB GROUP PALAM UNDER GE WEST DELHI CANTT-10
2022_MES_539501_1
CWE/WEST-16/2022-23
Open Tender
Civil Works
Item Rate
180 days
DELHI CANTT
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,000
GE WEST DELHI CANTT-10
₹1.4 L
Yes
9 Nov 2022
20 Jul 2022
5 Sept 2022
20 Jul 2022
3 Sept 2022
20 Aug 2022
Amount
M&L for powder coated anodised aluminium door shutters (minimum thickness of powder coating 50 micron), aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.
M&L for powder coated Anodised aluminium window and ventilator shutters (minimum thickness of powder coating 50 micron), fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.
M&L for powder coated Anodised aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators, grill, partitions, sliding tracks, aluminium section for shutters suitable for two/three/four track window and aluminium section sliding members including all necessary fittings and fixtures, jointing cleats, rubber packing etc complete all as specified and directed.
M&L for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed to door / window (steel/wooden) complete all as specified & directed.
M&L for 4 mm thick ACP sheet (Aluminium composite Panel sheet) fixed in aluminium partition/doors/window work including necessary jointing cleats, rubber beading, clips,etc complete all as specified and directed.
M&L for 10 mm thick Virified Ceramic tiles double charged/ultra charged (square/rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and as directed.
S&F 100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.
M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed.
M&L for Glazed ceramic coloured tiles 450x300/600x1200 mm in vertical surface, (square/ rectangular) set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed bed/backing in cement mortar 1:4 complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for applying 15mm thick ready mix mortar on wall surface as per manufacturer instruction complete all as specified and as directed. Make- Birla/JK cement/ACC/Lafarze
M&L for applying 15mm thick ready mix mortar on wall surface as per manufacturer instruction including taking down existing plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. Note : taking down of damaged plaster will be carried out after complete removal of existing treatment. Make- Birla/JK cement/ACC/Lafarze
M&L for applying 2mm thick exterior grade wall care putty in muitiple coat on prepared wall surface complete all as specified and directed.
Preparation of wall surface by completer removal of existing treatment any number of coat to receive fair surface upto plastered surface by mechanical means and removal of debrish beyond MOD land.
M&L for preparation of old painted steel & iron surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of syntethic enamel paint complete all as spd & directed.
M&L for applying 1 mm thick exterior grade wall care putty in muitiple coat on prepared wall surface complete all as specified and directed.
M&L for applyinge two coat of plastic emulsion paint surfaces of any description over 10cm girth or width, not otherwise described complete all as specified and as directed.
Material & Labour for applying and finishing walls surface with two or more coats of Acrylic Smooth exterior paint of required multiple shade or single shade as approved over and including priming coat of exterior primer complete all as specified and directed. Note: (1) Work will be carried out by auth applicator of manufacturer. (2) A performance guarantee for 5 year will be provided by manucaturers and contracotre. An amount of 10% will be withhold for security deposite for 5 years of guarantee period. (3). MoU for the work will be submitted by contractor form Manufacturers before execution.
S&F for Brass Chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union.
S&F Chromium plated brass long body bib tap fancy type 15 mm bore dia all as specified & directe.
S&F Chromium plated brass long body angular stop cock fancy type 15 mm bore dia all as specified & directe.
S&F 15mm dia swan neck fancy type pillar taps brass body with capstan head chromium plated screwed down high pressure with or without lettered “hot/cold” with long screwed shank and flynut screwed complete all as specified.
S&F in repair rotational moulded polythelene water storage tank (cylindrical, vertical with closed top) 1000 ltrs capacity (ISI Marked) incl necessary fitting like tank cover, nipple, socket etc, hoisted and fixed in position complete all as spd & directed.
S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gm)
M&L for vitreous china wash hand basin flat back size 550x400 mm size white excluding taps waste chain and plug and porcelain stopper but including brackets and 32mm dia waste fittings brass chromium plated with long screwd shanks and fly nuts, 32x600mm long PVC waste pipe complete and directed.
M&L 15mm bore GI tubing medium grade with all fittings and fixed complete to walls, ceiling or laid in floor including taking up or down 15 mm bore dia steel tubing and connections complete all as specified and directed.
All as per item No 29.00 here-in-before but 20 mm bore.
M&L for brick work with sub class 'B' straight or curved on plan exc 6m mean radius and built in cement mortar 1:4 complete all as specified and directed.
S&F false ceiling with powder coated GI grid of size 600x600 mm using main Tee of size 24x28x0.40mm prepunched to accept cross tee of size 24x28x0.40mm and wall angles of size 25x25x0.40mm fixed with wall alround of size with and including 6mm thick fiber cement board white colour designer tiles as approved by GE of size 595x595 mm placed in the grid and held in position duly suspended by 4mm dia GI wire hanger from the roof with holding down clips, butter fly clips and necessary provision for light fixture etc complete as per manufacturers instructions complete all as spd & directed.
Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out in hard/dense soil complete all as specified and as directed.
M & L for PCC 1:2:4 type B-1 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.
Surface excavation n exc 30cm deep and averaging 15cm deep including getting out in hard/dense soil complete all as specified and as directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.
M&L for 100mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base flooring complete all as specified and as directed.
M&L for Pre-polished machine pressed chequered cement concrete tiles glossy finish 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.
M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping, bed plates, hold fast for fixing of roof trusses, kerbs/gola/haumching including weathering slightly rounded or chamfered and throating and moulding the edges of roof sheets/interlocking tiles complete
S&F pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50 mm thick of any colour as approved by GE having tensile strength of 550Mpa as in roof covering, ridge, fixed with self tapping screws complete including necessary cutting chases to wall for inserting sheet adjoining to wall complete all as spd & directed.
M&L for mild steel work of Fe 410-W (Gde-E- 250) quality-A squar /rectangular tubular section in post, roof trusses (framed), trussed, purlins, rafter, crane gantries, rails and fastenings and heavy bracket framing of tube sections including distance pieces, cleats etc. specified and directed.
M&L for preparation of new steel & iron surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of syntethic enamel paint over a coat of red oxide primer complete all as spd & directed.
M&L for Ist Class hard wood for making wooden article like rifle rack etc including 2 coat of sythentic enamel paint over and including pink primer complete all as spd & directed.
M&L of point wiring for modular suitches or normal switches with 2X1.5 sqmm , single core , multi stranded copper conductor PVC insulated unsheathed cable 1100 Volts grade, drawn through concealed rigid non-metalic PVC Conduit of suitable size with all fittings of suitable size of dia as required at site including cadmium plated screws as per IS incl 3 mm thick phenolic laminated sheet top covers/suitable size of plate on and including sunk type CI/steel terminal boxes concealed in wall /sandwitch panel including 1.5 Sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly for One light/fan point controlled by one switch 5 Amps one way single pole complete all as specified and directed.
All as per item No. 44.00 here-in-before but one three pin 5 Amps socket out let on independent board.
All as per item No. 44.00 here-in-before but one three pin 5 Amps socket out let on same board.
All as per item No. 44.00 here-in-before but , point wiring of copper cable multi stranded 2x2.5 Sqmm size for 15/16 Amps socket outlet on independent board with 1.5 Sqmm size of earth conductor complete all as specified and directed.
S&F Modular switch 1 way 6 A,1 module complete all as specified and directed.
S&F Modular switch 1 way 16 A,1 module complete all as specified and directed.
S&F of Modular socket outlet 6 A, 2/3 pin, combined 2 module complete all as specified and directed.
S&F of Modular socket outlet 16 A, 2/3 pin, combined 2 module complete all as specified and directed.
Supply and fixing ceiling rose 3 pin flush type 6 A 250 V AC including ring complete all as specified and as directed.
S&F of Modular fan step regulator 1 module,120w flush type complete all as specified and directed.
S & F 7 Watt LED lamp 6500K including lamp holder, Complete all as specified and as directed.
Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
S & F LED light fitting 1X10 W bulk head luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S & F recesse Type LED Panel of not More than 34W 3000K, size 600X600mm with CRCA powder coated White Housing, Surge Voltage protection min 3KV, safety & performance test as per IS:15885 Part 2/Sec 13. Complete with all accessories as required with connections. complete all as specified and as directed.
S&F single pole MCB 6 to 32 Amps 240 v, 50 Hz AC suitable for 'B' Series" conforming to IS 8828 of 1996 including taking down old MCB's all as specified.
S&F of SPN 40 Amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity and terminal box suitable upto 63 sqmm cable complete conforming to IS 8828 of 1996 all as specified.
S&F in repair of factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB all as specified and directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.
Supply, laying and drawing in and including 20 mm dia concealed PVC rigid conduits including cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6.0 sqmm (as earth wire) of multi stranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990 complete including connection all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
Supply and fixing LED street light fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed.
Vipul Construction
SHIVA ENTERPRISES
M/S MSD & Associate
L G BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .