REPAIRING TO PCC FLOORING RAMP AND MISC REPAIRS AT CVD DEPOT AREA IN THE AREA OF AGE BR II UNDER GE WEST DELHI CANTT 10

Amount

Demolition of lime concrete of floors n.exc 15cm thick (below or above ground level) and removing demolised materials out side MOD land complete all as specified and directed.

M&L, Hardcore of broken stone of gauge n exc 63mm deposited, spreaded & levelled in layers n exc 15cm thick including watering and ramming etc complete all as specified and directed.

M&L 100 mm thick cement concrete M-25 design mix (RMC) ( 20 mm graded stone aggregate ) in floor, finished surfaces even and smooth with using extra cement complete all as specified and directed.

Demoliton of stone slabs & tiles of any thickness in floors, aprons laid & bedded & pointed in any martor and removal of rubbish beyond MOD land complete all asspecified and directed.

M&L Non skid coloured ceramic tiles joint free (400x400mm)x7 to 8 mm thick in floors over and including 15mm thick screed bed in Cement mortar 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured jointless (glosstra tiles) tiles of size 300x450/ 300x600 mm 7 to 8 mm thick in walls etc set and jointed in neat cement slurry and pointing in coloured cement, all as specified over and including 10 mm thick in cement mortar (1:4) as screed plaster complete all as specificed and directed.

M & L for 600x600x 8 mm thick vitrified tiles of approved colour laid in floors set and jointed in neat cement slurry and painted in coloured cement to match over and including 15mm thick screed bed or bedding layer in cm 1:6 etc complete all as specified and directed

M&L in repairs 60 mm thick reflective coloured cement concrete interlocking paver blocks hydraulically pressed of compressive strength not less than M-35 grade over 50 mm thick sand layer as cushion and joint fillet with sand and removal of rubbish beyond MOD land complete all as specified and directed..

M&L in repairs 80 mm thick reflective coloured cement concrete interlocking paver blocks hydraulically pressed of compressive strength not less than M-40 grade , laid over 50 mm thick dry sand including vibrating the pavers and joints filled with dry sand and removal of rubbish beyond MOD land complete all as specified and directed..

M & L for Coloured plastic mould reflective type Cement concrete polished chequered tiles 300mmX300mmX20mm thick machine pressed, set jointed and pointed with coloured cement over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L 100mm thick cement concerete 1:4:8 type B-2 using 40mm graded aggragete, finished rough surfaces without using extra cement complete all as specified and directed.

Dismantling of Asbestos cement , corrugated or semi (corrugated semi-corrugated etc) sheets in roof covering and including rubbish off the outside of MOD land complete of all as specifiedand directed.

M & L in repairs plain RMP ( reinforced) sheeting 1.5 mm thick with 10 cm side lap fixed with coach screw and PVC washer in roof and wall and including rubbish off the premises outside of MOD land complete all as specifiedand directed.

M & L pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed.

S & F in repairs 1.00 mm thick plain mild steel sheeting as in hip, valley gutter, drip and straight flashing ( length and with as fixed ), joints should be welded or soldered joints are provided incl soldering complete all as specified and directed.

S&F 0.63mm Galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L/J hooks , with grade of zinc coating 275 complete all as specified and directed

Dismantling of mild steel work of any description complete all as specified and directed.

Demoliton of reinforced cement concrete of any descriptionincl posts etc & in any position not otherwise specifically provided including removal of demolished material beyond MOD land complete all as specified and directed.

M & L for precast cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate ) for Man hole cover slab, shelves, cooking plateform & similar articles with plain faces & set in cement mortar 1:4 complete all as specified and directed.

S&F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking , bending, hooking etc and binding with MS wire 0.9mm dia(annealed) complete all as specified and directed.

Taking down cement plaster including racking out joints hacking for key scrubbing down with water etc on walls and ceiling and including removal of demolished material beyond MOD land complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions arches pillars etc including rubbish off the beyond MOD land complete all as specified and directed.

M&L brick work built in cement mortar (1:6) using sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius complete all as specificed and directed.

M&L 5 mm thick rendering in CM 1:3 of ceiling finished even and smooth without using extra cement complete all as specificed and directed.

M&L 15mm thick rendering in CM 1:4 external face of walls finished even and smooth without using extra cement complete all as specificed and directed.

M&L15 mm thick rendering in cm 1:6 internal face of wall finished fair even and smooth without using extra cement complete all as specified and directed.

Preparation of newly plastered surface of wall and applying two coats of weather proof coat with roller over and including a coat of primer over a coat wall care putty to obtain smooth surfaces ( as required) complete all as specified and directed.

Dismantling of Loose concrete cover from celing surface/chajja (including staicase ceiling) are including derusting of steel reinforcement and preparing the surface by cleaning dirt etc and applying chemical admixture over reinforcement and plastering the surface in two layer using chicken wire mesh before applying first layer. First layer of rendering is done upto surface of existing thickness of concrete in CM 1:3 and second layer 10mm thick rendering in CM 1:3 including three coat of white wash to match with existing surface complete all as specified and directed. (Note :(1) Rate quoted shall be inclusive of all scaffolding, props and shuttering, chicken wire mesh, chemical admixture and other T & P (2) Height of bldg upto 10 m . .

M & L for preaparation of newly plastered surfaces of walls/ceiling and applying three coat of white lime wash complete all as specified and directed.

M & L for preaparation of newly plastered surfaces of wall and applying two coats of Oil bound distemper with roller over and including a coat of primer over a coat wall care putty to obtain smooth surfaces ( as required) complete all as specified and directed.

M & L for preaparation of newly plastered surface of wall and applying two coat of cement based paint over a coat of primer complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connection complete all as specified and directed.

SS&F GI tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 15 mm bore incl cutting chases if required complete all as specified and directed.

S&F GI tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 20 mm bore incl cutting chases if required complete all as specified and directed.

Demoliton of cement concrete of any description & in any position not otherwise specifically provided and removing demolised materials out side MOD land complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (40 mm graded stone agg) as in sunken floors complete all as specified and directed.

M&L 40mm thick PCC 1:2:4 type B-0 (12.5 mm graded stone agg) as in Sub base complete all as specified and directed.

Taking down cement plaster of any description and material and labour for rendering 10 mm thiick in CM 1:4 laid to achieve slope with two coat of teap create mixed (1:2) with cement slurry @500 gm per sqm as per manufactures's instruction in sunken potion of toilets, finished even and smooth w/o using extra cement and applying a coat of bitumen primer @0.70 kg /sqm and applying one coat of hot bitumen 85/25 gde @2.6 kg/sqm and one layer of 0.5 mm thick fibre tissue over it, a coat of hot blown bitumen 85/25 gde @2.6 kg/sqm over it and then applying one layer of 0.50mm thick fibre glass tissue and final layer of hot blown bitumen 85/25 gde @2.0 kg/sqm, complete all as as specified and as directed.

S&F in repairs tubular towel rail, 20mm dia, ‘D’ type 60cm long between flanges of brass CP complete all as specified and directed.

S&F in repairs viterous china squatting pan 'ORISSA Pattern' size 580x440mm white with integral foot rests incl P or S Trap)(excluding flushing cistern & flush pipe) complete all as specificed and directed.

S&F in repairs vitreous china wash hand basins, white flat size 550x400mm including cutting and pinning in ends of brackets or errecting stand complete all as specificed and directed.

S&F in repairs PVC valve less syphonic action type flushing cistern 10 ltr capacity, low level, white with inlet, ball valve, float and handle including brackets and connection to pipes complete all as specified and directed.

S&F waste coupling of CP Brass ( half or full threaded). 32 mm bore for WHB/kitchen sink complete as specificed and directed.

S&F in repairs 125mm dia CP brass shower rose fixed to 15mm pipe of swivel joint type complete all as specified and directed.

S & F in repairs single lever swan neck pillar cock chromium plated brass body with flange fixed to 15 mm bore of pipe all as specified and directed.

S&F in repairs 15mm bore bib taps long body standard of Brass CP high pressure screwed for iron pipe and fixed complete all as specified and directed. .

S&F PVC connection 15mm dia and 45cm long with washers complete all as specified and directed.

S&F 32mm/40mm dia and 75 cm long PVC waste pipe for WHB and sink complete all as specified and directed.

S&F in repairs MS grating CP 125 mm dia of approved make including fixing with CM to floor/nahani traps etc complete all as specified and directed.

S&F in repairs CI 75 mm floor trap with grating incl jointing to waste pipe fixed in cement concrete complete all as specified and directed.

S&F in repairs 15 mm bore angle stop valve C P cast copper alloy screwed down high pressure with single lever handle screwed both ends for iron pipe complete all as specified and directed.

All as per item No 53 but fancy type, CP with long shank and cup conceal type.

S&F in repair CI branch piece single (equal or unequal) 100 mm ordinary or inverted (spigot or socket type) or with paralled branches with oval access door complete all as specified and directed.

S&F in repair CI branch piece single (equal or unequal) 75 mm ordinary or inverted (spigot or socket type) or with paralled branches with oval access door complete all as specified and directed.

S&F in repairs 100 mm CI bends access door (any radius) diminishing pieces or taper (large base measured) with oval access door complete all as specified and directed.

S&F in repairs 75 mm C I bends access door (any radius) diminishing pieces or taper (large base measured) with oval access door complete all as specified and directed.

S&F in repair 100 mm CI soil waste and vent pipe in any length with or without ears with connecting joints laid in trenches or in floor / fixed to walls complete all as specified and directed.

All as per item No. 59 here in before but 75 mm.

S&F 75mm stack clamp out of 25 mm X 3mm flat iron and 12mm dia round iron stays(confirm to sample) incl bolts and nuts and securing ends of stay to walls or roof complete all as specified and directed.

Taking down chowkhat or frame with shutters (without taking off shutters from the frame) n exc 1.5 sqm each complete all as specified and directed.

S&F solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube, supplying and fixing in opening as per manufacturers instructions drawings and specifications complete all as specified and adirected.

S & F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottoms rails MS frame shall be covered with heat moulded plain colour PVC C Chennel having a PVC sheet strip of 20 MM width stuck in side with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail in either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded and sealed to the styles and rail with suitable PVC sheet beading and joint together with solvent cement complete all as specified and directed.

S&F 150mm long aluminium anodised tower bolt of extruded section complete all as specified and directed.

S&F 100mm long extruded aluminium alloy handles, febricated typed , anodised complete all as specified and directed.

S&F 100 mm long stainless steel Butt hinges medium weight fixing with stainless steel screw complete all as specified and directed.

S&F anodised aluminium sliding windows three track section (Size 92mmx 31.75mm x 2.00 mm) weightnot less than 1.864 Kg/m and shutter size 14.7mm x43mm with aluminium anodised frame (Chowkhat) of aluminium section 104.00mmx44.45mmx1.80mm thick and two shutter having 14.8 mm thick tinteg glass.and one shutter stainless steel wire of dia 0.36 mm and average with of aperture1.40 mm including locking arrange touch type complete all as specified and directed.

Taking down chowkhat or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm but n exc 4 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and directed.

S & F 35 mm thick 2nd class hardwood gauzed and skelton shutters open rebated and prepared to receive glass / gauze etc ( with or without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of members of shutters as specified in SSR part-I section 8 clause 8.24(a) complete all as specificed and directed

S&F flush shutter solid core 30 mm thick constructs with block board and plywood face commerical type on both sides complete all asspecified and directed

S&F 35 mm thick 2nd class hardwood plain framed panelled shutters ( any number of panels) with panels of timber flat on both sides / feather edges) or of veneered particle board medium density wood particle board with commercial face veeners complete all as specificed and directed.

M & L for framed work as in doors or gates of angle or other section, frame work for chajja with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. confirming to Fe 410-W (Gde-E-250) quality 'A' complete all as specified and directed.

S&F Rolled Mild Steel work in roof trusses (framed), trussed, purlins, rafters including cleats , distance pieces, gusset & base plates, fixture & fastenings etc welding, drilling etc complete conforming to FE410-W (Gde-E250) quality 'A' complete all as specified and directed. .

S&F 300 mm long aluminium anodised door bolts, plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimium of 6 bolts and nuts four on bolt plate and two on staple plate and fixed.complete all as specified and directed.

Hacking out old broken glass of any thickness/size of any description from steel / wooden frame glazed with putty or fixed with beads complete all as specified and directed.

S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each pane complete all as specified and directed

S & F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed

S & F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples fixed in wooden or steel frame complete all as specified and directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S & F in repairs Vitreous China urinal, half stall type white of complete including providing and fixing plugs ,bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws , pointing around urinal back in cement complete all as specified and directed.

S&F Aluminium door single leaf with powder coated aluminium frame of section 62.5x37x1.5mm thick, shutter with bottom & middle rail of section 112.50x 37x1.5mm thick and styles & top rail of section 83x37x1.5mm thick with centrally locking arrangement with lock make of ‘GODREJ’ or ‘LINK’ & hydraulic door closer.4.8 mm thick tinted glass with rebate including jointing cleats, fixing of builders hardware fittings, necessary numbers of floor spring and glazing with 5mm thick frosted glass including necessary fittings, fixtures & aluminium snap beads, complete all as specified and directed.

M & L for 75mm thick PCC 1:3:6 type C-2 as in plinth protection laid in bays surfaces even and smooth with using extra cement including filling joints with bitumastic asphalt (1:2) complete all as specified and directed.

S & Fin repairs 2 mm thick polycarbonate transperent acrylic sheet to ventilator of hanger ( ht of ventilator FFL more 10 mtr) with self tapping screws with PVC washer incl necessary arrangement ( scaffolding, sefty belt, helmet and life insurance etc ) complete all as specified and directed.

Deduct Credit: for demolished/dismantled material of (-) Rs 104395.00 (Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum.

S GOURAV PRAKASH ENTERPRISES

M/S.M.S.Devi.Const.Co

M/s M M BAHL

a.k constructions

Ess Dee Construction Co.

Vipul Construction

GAUTAM ELECTRIC WORKS

Hira Singh and Sons

L G BUILDERS

PRAHLAD NARAIN KOLI