Repair and renovation of Transit camp and misc work at Dam site, Teesta-V Power Station

Removing dry oil bond distemper by scrapping, sand papering and preparing the surface smooth including repairs to scratches etc complete.

Dismantling of Structures (Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cementconcrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres :Dismantling Brick / Tile work :In cement mortar

Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with1:4 cement mortar(1 cement and 4 course sand)including carriage of bricks upto work site, curing etc all complete.

12mm thick Cement Plaster :1:6 Mix.

Providing and Providing and painting with plastic Emulsionpaints one or more coats on old surface of required shade to give even shade in- including brushing the surface clean of all dirt, dust and smoothened by sand paper etc complete

Providing & Laying white or colored glazed vitrified tiles of Orient / Somani or equivalent colour in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry

Providing / Fitting / Fixing Gypsum board ceiling having composite thickness of 67mm consisting of frames and double skin 8.5mm thick glass reinforced gypsum (GRG) board manufactured by spray suction technique with high strength plaster of paris confirming to IS 8272 i/c providing and fixing frame works made of special section power pressed MS sheet and galvanized with Zinc coating of grade 175and consisting of floor and ceiling channel 50mm wide having equal flanges of 32mm width 0.50 m thick fixed to floor/ceiling at spacing 610 mm centre to centre by 6mm dia. bolts and nuts to both ends of ceiling (hang on truss)/ partition fixed on wall with rawl plugs) at the spacing of 450mm c/c and fixing of GRG boards to either frame work by 20mm long drive screws on studs, floors, Ceiling channel spacing of 300mm c/c i/, join paper tapes i/c two coats of primer suitable for GRG board as per manufacture specification

Providing and fixing to existing door shutter 35 mm thick Glass Fibre Reinforced Polyester (FRP) paneled door shutter of required colour and approved brand and manufacture, made with fire-retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden blocks of seasoned wood inside at required placed for fixing and fittings, cast monolitically with 5 mm thick FRP laminate for panels confirming to TADS 6: 1993 and / or IS 14856-2000 including fixing to frames.

Providing, fitting and fixing water proof flush door shutters, solid block hard core construction with frame of 1st class hard timber with well matched 3mm teak ply decorative type on one faces of the shutters including hinges with screws complete. : 32mm

Providing and fixing anodized aluminum works for doors, windows, ventilators and partitions with extruded built up standard tubular or other section of approved make confirming IS733 and IS 1285, fixed withrawl plugs and screws or with fixing clips or with expansion hold fastenersi/c necessary filling up the gap sat junctions,at top,bottom and sides withrequired C/neoprene felt,etc.Al.section shall be smooth, rustfree, straight,mitered and joined mechanically wherever requiredi/c cleatangle,Al snap beading forglazing/paneling CP brass/ stainless screws, all complete as per design and drawings and the direction of the Engineer - in - Charge.