PERIOCIAL SERVICES, ALLIED WORK AND CLEANING OF SERVICES OH WATER TANKS AND CONNECTED MISC WORKS IN DOMESTIC AREA AT AF STN JAISALMER

Amount

Preparation of old decorated plastered surfaces of wall incl brooming down moulds & efforecent salt and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.

Preparation of old decorated surfaces of ceiling of any description and applying one coat of white wash complete all as specified and directed.

Preparation of old decorated plastered surfaces of wall by washing, rubbing down and stopping of old distempered and painted sufaces and applying one coat of oil bound distemper of any tint complete all as specified and directed.

Preparation of old decorated plastered surfaces of wall by washing, rubbing down and stopping of old distempered and painted sufaces and applying two coat of oil bound distemper of any tint complete all as specified and directed

Complete removal of existing treatment, filling up undulation and applying one layer ready mixed wall care putty on entire surface of wall etc to a smooth finish cutting and finishing with appropriate sand paper and applying two coats of oil bound distemper of any tint over a coat of primer after smoothening of surfaces complete all as specified and directed.

Preparation of old painted wooden surfaces of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint of any tint etc complete all as specified and directed.

Preparation of old painted steel surfaces over 10cm in width or girth as in steel gate, swan neck fencing posts over perimeter compound wall, steel door etc and applying one coat of synthetic enamel paint with appropriated arrangements complete all as specified and directed.

10mm thick cement plaster in cement and sand mortar (1:6) on stone masonry or concrete surfaces of wall and finished the surface even and smooth without using extra cement including taking down cement plaster complete all as specified and directed.

5mm thick ceiling plaster in cement and sand mortar (1:3) on uneven faces of concrete surfaces on ceiling finished the surface even & smooth without using extra cement and including taking down old cement plaster, complete all as specified and directed.

Preparation of newly plastered surfaces of wall surfaces and applying two coats of oil bound distemper of any tint over a coat of primer after smoothening of surfaces complete all as specified and directed.

Preparation of newly plastered surfaces of ceiling surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

Preparation of old treated/decorated wall surfaces of any description by brooming down or steel wire brushing scrapping down and applying two coat of plastic emulsion paint (1st quality in different tints/shades pattern any colours) after smoothening of surface complete all as specified and directed.

Preparation of old decorated plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc over 15mm thick in cement and mortar (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match and including dismantling floor, hearth or wall tiling with cement mortar bedding complete all as specified and directed

Non Skid colouredceramic tiles 7 to 8mm thick (square/rectangular) same as par floor tile on vertical surfaces as skirting etc over 10mm thick in cement and mortar (1:4) bedding set and jointed in neat cement slurry and pointed in coloured cement to match and including dismantling of existing tiling with cement mortar bedding complete all as specified and directed.

Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc over 15mm thick in cement and mortar (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match and including dismantling floor, hearth or wall tiling with cement mortar bedding complete all as specified and directed

Glazed colouredceramic tiles in dado/skirting 300x450x6-7mm / 350mm x250mm x6-7mm thick on vertical surfaces, dado and skirting over and including 15mm thick cement and sand mortar (1:4) backing coat set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tile and including dismantling of existing tiling including cement mortar bedding complete all as specified and directed

18mm to 20mm thick granite stone work (table rubbed and polished) as in steps, jambs, pillars, window-cills, cooking platforms and like in cement and sand mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm cement screed bed in cement and sand mortar 1:6 laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing including dismantling of existing stone slab bedding complete all as specified and as directed.

Vitreous china squatting pan 'Orissa Pattern' of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with P' or 'S' trap complete including provision of PCC 1:5:10 bedding jointing and making good to floor and taking down old unserviceable complete all as specified and directed.

Vitreous china wash down water closet pan (Pedestal pattern), white colour, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with plastic water closet seat cover (white colour) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device including taking down old unserviceable complete all as specified and directed.

Vitreous china wash hand basin white colour flat back of size 550x400mm including cutting for and pinning in ends of or erecting stand including waste fitting, brass chromium plated 32mm size with longh with including a pair of cast iron brackets embedded in PCC 1:3:6 type C-1 blocks of size 10x7.5x15cm with including taking down old unserviceable existing complete all as specified and directed.

Corner wash basin without pedestal Vitreous China white flat back of size 400x400mm including cutting for and pinning in ends of brackets or erecting stand but excluding taps, waste, chain and plugs and proclain stopper but including brackets including taking down old unserviceable existing complete all as specified and as directed.

Flushing cistern PVC of capacity 10 Litres valve less syphonic action type, low level, white colour, with inlet, ball valve, float and handle including brackets complete with flush pipe fixed as in repair complete all as specified and directed.

Sink with drainage board made of stainless steel 1mm thick for Kitchen or laboratory with plugs, washers and waste including coupling with pipe bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915mm x 460mm, bowl size 410mm x 330mmx160mm with all fitting and fixure fixed as in repair complete all as specified and directed.

PVC (SWR) floor trap 75mm dia outlet plain with grating including jointing with solvent cement for trap fixed as in repair complete all as specified and directed.

110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches/floor fixed as in repair complete all as specified and directed.

110mm bore PVC (SWR) bend any radius provided fixed as in repair complete all as specified and directed.

110mm bore PVC (SWR) Junction Single (Single T) equal or unequal provided with access door fixed as in repair complete all as specified and directed.

75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches/floor fixed as in repair complete all as specified and directed.

75mm bore PVC (SWR) bend any radius provided fixed as in repair complete all as specified and directed.

75mm bore PVC (SWR) Junction Single (Single Y) equal or unequal provided with access door fixed as in repair complete all as specified and directed.

Galvanized steel water tubing medium grade of 15mm bore with & including all fittings fixed to walls and ceiling or laid in floors, including taking up or down old unserviceable existing steel water tubing and connections , complete all as specified and directed.

CPVC 16 mm outer dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down old unserviceable existing tubing and connections complete all as specified.

Re fixing 20 mm bore old steel tubing and connections, in new or old position with new fitting (walls, ceiling, floors etc) including taking up or down old unserviceable existing steel water tubing and connections complete all as specified and as directed

Galvanized steel water tubing medium grade of 20mm bore with & including all fittings fixed to walls and ceiling or laid in floors, including taking up or down old unserviceable steel water tubing and connections , complete all as specified and directed.

Re fixing 25 mm bore old steel tubing and connections, in new or old position with new fitting (walls, ceiling, floors etc) including taking up or down old unserviceable existing steel water tubing and connections complete all as specified and as directed

Galvanized steel water tubing medium grade of 25mm bore with & including all fittings fixed to walls and ceiling or laid in floors, including taking up or down old unserviceable steel water tubing and connections , complete all as specified and directed.

Cutting chases, pinning in, making good to facings as original where required and pointing in cement and sand mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10cm girth in stone concrete blocks or slabs complete all as specified and directed.

Rotational moulded polyethylene water storage tanks 500 Litre capacity triple layered (white cylindrical vertical with closed top) ISI marked, hoisted & fixed in position with 20mm bore ball valve of high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including taking down existing water storage tank complete all as specified and directed.

Rotational moulded polyethylene water storage tanks 1000 Litre capacity triple layered (white cylindrical vertical with closed top) ISI marked, hoisted & fixed in position with 20mm bore ball valve of high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including taking down existing water storage tank complete all as specified and directed.

Ball valves, high pressure of PTMT (Polytetra methylene terephthalate) with epoxy coated aluminum rod & high density plastic ball and fly nut, screwed for iron pipe 20mm dia (minimum weight 210 gms) fixed as in repair complete all as specified and as directed.

15mm bore chromium plated bib taps fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed as in repairs complete all as specified and directed.

15mm bore fancy type chromium plated pillar taps long back/swan neck, cast copper alloy with capstan heads, screwed down high pressure with long screwed shanks and fly nuts screwed down for iron pipes etc with or without lettered hot or cold and fixed as in repair complete all as specified and directed.

Angle cock, 15mm bore fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed as in repair complete all as specified and directed.

PVC connection suitable for 15mm bore with PTMT nuts of 600mm length and including taking down old unserviceable complete all as specified and directed.

Brass chromium plated shower rose (ISI marked) 125mm size with or without swivel joints , including fixing to steel pipe or union, supplied and fixed in repairs complete

32/40mm bore PVC flexible down take waste pipe length not less than 0.70m fixed to WHB, urinal or sink fixed as in repair complete all as specified and directed.

PVC Cover heavy duty for PVC water storage tank of capacity 500/1000 litres ISI marked fixed as in repair complete all as specified and directed.

20 mm dia Gun metal gate valves with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed

Cleaning water storage tanks of PVC/HDPE/RCC capacity 500 litre staged over RCC roof/floor slab or similar place inside / out side buildings by removing float valves carefully, thoroughly cleaning the tanks mechnically as per the following procedure, including removal of sludge/mud /unpotable water and other depositions to a distance not exceeding 50m as directed to make tank totally dirt free and finally cleaning the water tank with fresh water till water becomes clear to the entire satisfaction of Engineer-in-Charge and re-fixing of float valve complete all as specified and directed. (a) Dewatering the residual water in the tank using high capacity portable submersible pump. (b) Stirring of bottom sludge mechnically and removing off by using high pressure vaccum pump. (c) cleaning internal surfaces of tank with high pressure air water jet using roto compressor. (d) Removing complete water using vaccum pump. (e) Spraying anit bacterial solution @ 50 litres of water mixed with 0.25 litres of concentrated gramicid of 48% W/W H2O2. (f) Spraying of bleaching powder solution @ 100 litres of water mixed with 3 Kg bleaching powder of requisite concentrate.

Cleaning water storage tanks of PVC/HDPE/RCC capacity 1000 litre staged over RCC roof/floor slab or similar place inside / out side buildings by removing float valves carefully, thoroughly cleaning the tanks mechnically as per the following procedure, including removal of sludge/mud /unpotable water and other depositions to a distance not exceeding 50m as directed to make tank totally dirt free and finally cleaning the water tank with fresh water till water becomes clear to the entire satisfaction of Engineer-in-Charge and as specified and re-fixing of float valve complete all as specified and directed. (a) Dewatering the residual water in the tank using high capacity portable submersible pump. (b) Stirring of bottom sludge mechnically and removing off by using high pressure vaccum pump (c) cleaning internal surfaces of tank with high pressure air water jet using roto compressor. (d) Removing complete water using vaccum pump. (e) Spraying anit bacterial solution @ 100 litres of water mixed with 0.50 litres of concentrated gramicid of 48% W/W H2O2 (f) Spraying of bleaching powder solution @ 100 litres of water mixed with 3 Kg bleaching powder of requisite concentrate.

prem enterprises

M/s RKG CONSTRUCTIONS

S K TRADER

Leelashah Enterprises