STAND BY POWER SUPPLY FOR SHAKTI BHAWAN EXTN. BUILDING LUCKNOW

Amount

Supplying, Installation, Testing and commissioning of 500 KVA, 415 Volts Silent DG set comprising of Jakson Make with Cummins engine model KTAA19G10 developing 587 BHP and 500KVA, 415 V Stamford make alternator mounted on a common base, complete with: i. Fuel tank. ii. Batteries and leads. iii. AMF panel iv. Residential Silencer v. First fill of lube oil vi. AVM Pads. vii. Acoustic Enclosure. viii. Freight.

Construction of one no. foundation of 500 KVA silent DG set including all labour material approved drawing, design etc. complete in all respect as per directed by engineer incharge.

Supply & laying of 185 Sq.mm.3-1/2 Core of aluminum conductor PVC insulated armored served sheathed cable 1100 Volts grade at a depth of 750 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on MS clamps etc. of suitable size of as directed by the Engineer-In charge, complete in all respect. The armoring of the cable shall be properly connected with the earth conductor by clamps etc. (PSI No. 501-Q)

Supplying, Installation, Testing and commissioning of 1000 Amp. – 415 V ACB EDO type release: Microprocessor based ET6A Trip unit (with current metering), Type: easy pact for dust, damp and vermin proof cubicle free floor, indoor type factory built sheet steel enclosed L.T. panel, suitable for operation on 415+-10% volts, 50 HZ AC 3 phase 4 wire supply systems fabricated our of suitable sized square tubular section and covered with CRCA sheet steel of 2 mm thick for frame work and 1.6 mm covers (non load bearing), 2mm thick for gland plates i/c cleaning and finishing complete with 7 tank process for powder coating in approved shade, having extensible type TPN aluminum bars of high conductivity, SMC bus bar supports with bottom base panel of section not less than ISMC 75 mm fabrication shall be done in transportable sections, entire panel shall have a common GI earth bus bar to switch gears with required size of AL bus bars and inter connection with solid copper conductor wires/AL strips, neutral links, including control wiring with 1.5/2.5 sqmm PVC insulated FRLS copper conductor single core cable, cable alleys, cable gland plates in two hold, etc. necessary metering protection & indications and mounted with the following switch gears as per drawing and technical specifications etc. complete as required. The panel should be IBMS compatible. (Including the item no. 4.10 to 4.50) Make:- ABB 4.1 Multifunction meter with RS85, parameters: Volts, Amps, PF THD, F.W.Wh, VA, Vah, Var, Varh, Runhrs, Onhrs, Interupts, Preloaded Demand & Import/Export, Acc CI:1, Model: EM6400NG Make:- L &T/Rishabh-1.00No. 4.2 Red Gen Next pro LED indicator 22.5mm, Voltage: 240AC Make:- L&T/C&S-1.00 No. 4.3 Green Gen Next pro LED indicator 22.5mm, Voltage: 240V AC Make:- L&T/C&S-1.00 No. 4.4 Yellow Gen Next pro LED indicator 22.5mm, Voltage: 240 AC Make:- L&T/C&S-1.00 No. 4.5 6A IP 10 KA C-Curve MCB, Type: x C60 Make:- L&T/C&S-4.00 Nos

Jointing of 185sqmm x 350 core end side cable with aluminium lugs. -1.00 Job.

Deora Electricals

EAGLE CONSTRUCTION