Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.9 LAccepted-AOC 84 B LOWER BURDWAN COMPOUND RANCHI 834001 JHARKHAND | RANCHI | JHARKHAND | 834001 | L1 | Accepted-AOC Lowest rate quoted | |
| 2 | L2₹40.0 L+₹1.1 L (2.86%)Rejected-Finance SOUTH CANEL PAR PO PANAGARH BAZAR DISTT PASCHIM BARDWAN WB PIN 713148 | PANAGARH BAZAR | PASCHIM BARDWAN | WEST BENGAL | 713148 | L2 | Rejected-Finance Higher rate quoted | |
| 3 | L3₹40.7 L+₹1.8 L (4.67%)Rejected-Finance | L3 | Rejected-Finance Higher rate quoted | |
| 4 | L4₹41.1 L+₹2.2 L (5.68%)Rejected-Finance VILLAGE PO BUD BUD DIST BURDWAN WB PS BUD BUD PIN 713403 | BUD BUD | BURDWAN | WEST BENGAL | 713403 | L4 | Rejected-Finance Higher rate quoted | |
| 5 | L5₹41.5 L+₹2.7 L (6.83%)Rejected-Finance MANKAR MANKAR MANKAR RAIPUR BARDHAMAN WEST BENGAL 713144 | PURBA BARDHAMAN | WEST BENGAL | 713144 | L5 | Rejected-Finance Higher rate quoted |
Tender Value
₹48.4 L
EMD Value
₹96,800
Closing Date
22 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2022_MES_533464_1
8400-823/E8
Open Tender
Civil Works
Works
210 days
PANAGARH
Class D, Cat a (i)
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹96,800
Yes
2 Sept 2022
24 Jun 2022
23 Jul 2022
24 Jun 2022
22 Jul 2022
8 Jul 2022
Amount
M&L for excavating over areas, n.exc 1.5 m deep and getting out in soft/loose soil complete all as specified and directed.
M&L for 300 mm thick Kankar or laterite, (mix of fly ash, clinker and stone dust in proprtion of 1:3:6 (i.e. 10% fly ash, 30% clinker and 60% stone dust) spread, rolled and consolidated to gradient and camber required complete all as specified and directed
M&L for broken stone hardcore of guage n.exc 63mm, deposited, spread and levelled in layers n.exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for 100mm thick PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed.
M&L for 100 mm thick PCC 1:2:4 type B2 (using 40mm graded crushed stone aggregate) as in hardstanding laid in panels with and including use and waste of formwork and to divide the area in panels and finishing the surface even and fair complete all as specified and directed
M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed
M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and directed
M&L for cement concrete, 1:2:4, type B1 (using 20mm graded stone aggregate) as in bed block, coping, lintel upto 1.50 m span, cills, kerbs etc complete all as specified and directed
Removing excavated soil n.exc. 50m and n.exc 250m depositing where directed at a level n.exc. 1.5m above the starting point complete all as specified and directed.
M&L for reinforced cement concrete, type A-1 (1:1.5:3), (using 20 mm graded stone aggregates) as in walls, retaining wall, basement walls any thickness etc complete all as specified and directed.
M&L for mild steel TMT bars 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed ) not less than 0.9 mm dia complete all as specified and directed.
Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth for foundation etc or for soft, wells, cesspits, manholes, pier hoes, etc n.exc 10 sqm on plan and n.exc 1.5 mtr in depth and getting out soft/loose soil complete all as specified and directed.
M&L for moorum/red bajri filling in floors or pavings laid in layers n.exc 30cm thick,spread, levelled and rammed including watering complete all as specified and directed by Engr-in - charge.
M&L for cement concrete in fdn filling and mass concrete type C2,1:3:6 (using 40mm graded stone aggregate) complete all as specified and directed.
M&L for fly ash brick work old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4),without using extra cement complete all as specified and directed.
Returning, filling in including spreding, levelling, watering and well ramming in layers complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in coping including form work complete all as specified and directed.
M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in surface channel and drain etc complete all as specified and directed
Extra for forming fair finished drain or channel of manholes inner girth exceeding 30cm in cement concrete using extra cement including forms, mould mitered stopped ends etc complete all as specified and directed
Excavation in trenches not exc 1.5 m wide and not exc 1.5 m depth for cesspit, manhole etc, and getting out hard/dense soil even in foul position complete all as specified and directed.
Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and directed. (Note :- Punned thickness 18 cm shall only be considered for payment).
M&L for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of UG cable complete all as specified and directed.
M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using galvanised iron strip 25×4mm as earth wire electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 32 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments, 20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:3:6 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:3:6 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electrical plate No 3 of SSR Part I, complete all as specified and directed and testing on completion. (Note :- (i) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. (ii) Testing to be carried out by the contractor in presence of Engr- in- Charge , entered in the eath testing register, prepared and to be maintained by the contractor & submited to Concerned JE E/M. (iii) T&P and testing instrument(Meger) to be provided by the contractor at own cost).
Supply, laying/fixing/connecting, testing and commissioning of 50 Sqmm 3.5 Core LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor, 1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) complete all as specified and directed by the Engr-in-Charge. (Note:- (i) Excavation,sand cushioning,brick will be measured and paid separtely. (ii) Metal route indicator on every 30 meter to be fixed while returning fitting with PCC and no extra payment will be made for this item). (Make: M/s Polycab/M/s KEI/ M/s RR Kabel)
All as per item No 25.00 mentioned here-in-above but of size 10 Sqmm 2 Core complete all as specified and directed.
S&F single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps, 240 V complete all as specified and directed by Engr in Charge
M&L for 40mm bore, steel tubings, galvanised, light grade with all fitting laid across road, in trenches or across PCC drain or along electric pole or floor/wall etc for protection of cable complete all as specified and directed.
Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150mm dia suitable for 0.4 mpa working pressure complete all as specified and directed.
Supply, commissioning and testing Outdoor type LT Distribution Panel, double door weather proof, CPRI approved, Seven tank treatment powder coated factory made LT Panel board, totally enclosed, dust and vermin proof openable from front & back side, canopy headed, connected with suitable size MS angle iron frame, of suitable size for main distribution Panel, fabricated with CRCA sheet 3.15mm thick sheet incluing IP - 55 protection, installed on concrete base made of PCC (1:3:6) type C1 (using 20mm graded stone aggregate), including self locking arragement. New Panel board shall comprise of :- (a) Copper Busbar rating- 250 Amps- 04 Nos (b) Indication lamp for RYB - 01 Set (c) MCCB-100 Amp, 4 pole, 18KA fixed Thermal & Fixed Magnetic setting, 415 V, 50 Hz AC-01 No(Incoming) (d) MCCB-32 Amp, 2 pole, 10KA C Curve, 230 V, 50 Hz AC-10 Nos(Outgoing) (Note: (i) PCC rate for foundation to be included in this item rate. (ii) All accessories for LT distribution panel must be OEM recommended).
Hooghly Construction Co.
SARASWATI ENTERPRISE (INDEX NO CEEC D-81)
rahul enterprise
M/s Baba kshatrapal Labour Contract And Construction Co-Operative Society Ltd
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .