Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.6 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹10.0 L+₹1.3 L (14.9%)Rejected-Finance 145H 2G AQAMA MODEL APARTMENT LUKERGANJ PRAYAGRAJ UTTAR PRADESH | PRAYAGRAJ | UTTAR PRADESH | 211001 | L2 | Rejected-Finance Other Than First Lowest | |
| 3 | L3₹10.0 L+₹1.3 L (15.1%)Rejected-Finance | L3 | Rejected-Finance Other Than First Lowest | |
| 4 | L4₹10.6 L+₹1.9 L (22.4%)Rejected-Finance | L4 | Rejected-Finance Other Than First Lowest | |
| 5 | L5₹10.6 L+₹2.0 L (22.5%)Rejected-Finance A 47D RAM DUTT ENCLAVE UTTAM NAGAR NEW DELHI 110059 | WEST | DELHI | 110059 | L5 | Rejected-Finance Other Than First Lowest |
Tender Value
Refer Docs
EMD Value
₹30,000
Closing Date
9 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Jaipur
GE Jaipur
PERIODICAL SERVICES AND MISC B/R REPAIRS TO OTM ACCN IN ZONE-I AREA UNDER AGE B/R-I OF GE JAIPUR
2023_MES_606458_1
GE/J-35/2023-24
Open Tender
Civil Works
Item Rate
335 days
GE Jaipur
As per Tender Documents
5 documents required · 5 mandatory
₹500
GE Jaipur
₹30,000
Yes
9 Nov 2023
28 Jun 2023
11 Sept 2023
28 Jun 2023
9 Sept 2023
22 Aug 2023
Amount
M&L preparation of old decorated surfaces of walls, pillars and cornices, including brooming down and cleaning the surfaces and applying one coat of white wash complete all as specified & as directed.
,---ditto-- all as per item No 1 above but two coats of white wash on wall complete all as specified & as directed.
,---ditto-- all as per item No 1 above but one coat of white wash on ceiling surface complete all as specified & as directed.
,---ditto-- all as per item No 1 above but two coats of white wash on ceiling surface complete all as specified & as directed.
M&L preparing old decorated surface of walls including brooming down and cleaning the surfaces and applying one coat of distemper (Oil emulsion) of approved tint complete all as specified & as directed.
M&L complete removal of the existing treatment using mechanical means on old surfaces and applying two coats of distemper (Oil emulsion) over and including a coat of primer over a coat of wall care putty of approved tint complete all as specified & as directed.
M&L complete removal of existing treatment using mechanical means on old surface of walls and applying two coat of cement base paint of any approved tint complete all as specified & as directed.
M&L preparation of old decorated surfaces of walls and applying one coat of cement base paint of approved tint complete all as specified and directed.
M &L complete removal of existing treatment using mechanical means on old surfaces of walls , AC sheet, soffits of chajjah of any description and at any position and applying one coat of 100% Premium acrylic emulsion exterior paint of required shade (Company Depot Tinted) paint as per IS 15489:2004, complete all as specified and directed
,---ditto-- all as per item No above but two coats of weather proof exterior emulsion paint.
M&L preparing old painted wooden surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint of approved tint complete all as specified & as directed.
,---ditto-- all as per item No 11 above but two coats of synthetic enamel paint complete all as specified & as directed.
M&L preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint complete all as specified & as directed.
,---ditto-- all as per item No 13 above but two coats of synthetic enamel paint over a coat of primer complete all as specified & as directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & as directed.
M&L brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 for raising of height of drain, manhole / wall complete all as specified & as directed.
M&L brick work with old size with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified & as directed.
Taking down cement plaster or cement lime plaster any descrption on stone surface/ brick surfaces of wall or ceiling including raking outs joint hacking for key scrubbing down with water etc complete all as specified & as directed.
M & L rendering 15 mm thick on stone masonry or other than fair faces of brick surfaces in CM (1:6) finished even and smooth with out using extra cement complete all as specified & as directed.
M & L rendering 15mm thick on Brick masonary surfaces or surface other than fair faces of brick work on wall in CM 1:4 finished even and smooth without using extra cement complete all as specified & as directed.
M & L rendering 10 mm thick cement plaster in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.
M & L rendering 15 mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.
M & L rendering 10mm thick on concrete surfaces on ceiling in CM (1:3) including reinforced with chicken wire mesh finished even and smooth without using extra cement complete all as specified & as directed.
M & L Preparing new plastered surfaces and applying three coats of white wash on ceiling complete all as specified & as directed.
M & L Preparing new plastered or unplastered surfaces and applying two coats of cement base paint on walls complete all as specified & as directed.
M&L for two coat of weather proof exterior emulsion paint (Weather coat smooth) over a coat of priming (Seal-o-Prime) on new plastered surface including preparation complete all as specified and directed.
M & L Preparing new plastered surfaces and applying two coats of oil bound distemper over priming plastered surfaces with alkali resistant priming paint complete all as specified & as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & as directed.
Demolition of PCC in ground floors and pavings n exc 15 cm thickness( below or above ground level) complete all as specified & as directed.
M&L 75mm thick plain cement concrete type B-1, 1:2:4 (using 20 mm graded aggregate) as in floor complete all as specified & as directed.
M & L coloured non skid ceramic tiles 300x300x7mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as specified & as directed.
M & L glazed coloured ceramic tiles 300x450x7 mm thick, on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick screed bed in CM 1:4 complete all as specified & as directed.
M & L coloured Non skid ceramic joint free tiles 400x400x7 to 8mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as specified & as directed.
M & L coloured Non skid joint free ceramic tiles 400x400x7 to 8mm thick in vertical surface as in skirting over & including 10mm thick rendering on stone masonry surfaces or surfaces other than fair faces of brick work in CM 1:4 complete all as specified & as directed.
Taking up or down steel tubing and connection including cleaning for refixing 15 mm bore complete all as specified & as directed.
Taking up or down steel tubing and connection including cleaning for refixing 20 mm bore complete all as specified & as directed.
Taking up or down steel tubing and connection including cleaning for refixing 25 mm bore complete all as specified & as directed.
S&F GI tubing medium grade with all fitting 15 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor complete all as specified & as directed.
S&F GI tubing medium grade with all fitting 20 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor complete all as specified & as directed.
S&F GI tubing medium grade with all fitting 25 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor complete all as specified & as directed.
S&F in repair 15 mm bore bib tap fancy type chromium plated cast copper alloy with cruth or butter fly handle screwed down for iron pipe and fixed complete all as specified & as directed.
S&F in repairs PVC valveless, syphonic action type flushing cistern low level 10 ltr capacity white, with intel, ball valve, float and handle including brakects, flushing pipe complete all as specified & as directed.
S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified & as directed.
S&F in repairs Vitreous China wash basin, white , flat back, size 550mmx 400mm but including brackets , coupling and waste pipe complete all as specified & as directed.
S&F in repair Pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe 15 mm complete all as specified & as directed.
S&F in repair stainless steel grating doom 100 mm dia complete all as specified & as directed.
S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and connection to drain (or out going pipe) and to flushing pipe etc. complete all as specified and directed.
S&F in repair vitreous china Squatting pan 'Orissa' pattern water closet white size 580mm x 440 mm with integral foot rest (excludinfg flushing cistern and flush pipe) complete including connection to trap and flushing pipe antisyphone pipe etc complete all as specified & as directed.
S&F in repair vitreous China urinals, bowl type(back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified & as directed.
S&F in repairs, PVC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated hinging device for Anglo Indian WC/ English WC as in repairs complete all as specified and as directed.
S&F in repair stop valve cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 20 mm bore or union and fixed complete all as specified & as directed.
S&F in repair stop valve cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 15 mm bore or union and fixed complete all as specified & as directed.
S&F in repair angle stop valve cast copper alloy chromium plated screwed for iron pipe 15 mm bore complete all as specified & as directed.
S&F in repair chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union 125mm size complete all as specified & as directed.
S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod &high density plastic bal screwed for iron pipe 20 mm dia and fixed (Minimum Weight 210 gms) complete all as specified & as directed.
PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75 mm bore complete all as specified & as directed.
PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110 mm bore complete all as specified & as directed.
PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm complete all as specified & as directed.
PVC (SWR) bends any radius 75 mm bore complete all as specified & as directed.
PVC (SWR) bends any radius 110 mm bore complete all as specified & as directed.
S&F PVC (SWR) vent cowl equal or unequal for 110mm dia bore complete all as specified and as directed.
Taking down PVC pipes including all fittings like shoes, bends, swan necks etc of any dia complete all as specified and as directed.
S&F 150 x 150mm stainless steel grating fixed on floor /Nahani trap in repair complete all as specified & as directed.
Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specificallly provided complete all as specified and as directed.
M&L for providing cement concrete (1:5:10), type E-2, using 40mm graded stone aggregate as in sunken portion of WC/toilet/bath complete all as specified and as directed.
M&L for rendering 10mm thick, in cement mortar (1:3) on concrete/brick work of sunken portion, mixed with Dr Fixit pidiproof LW+ or equivalent @ 200ml/50Kg of cement complete all as specified and as directed.
M&L for applying two coats of flexible polymer acrylic water proofing coating, 1mm thick (Dry film in two coats) using Dr Fixit pidifin 2K of M/S Pidilite Industries or equivalent including necessary pond testing in sunken portion complete all as specified and as directed.
M&L for preparing, clean and dried plastered roof/sunken surfaces and applying APP modified water proofing membrane with non woven polyster reinforcement/ mat not less than 3mm thick having weight not less than 3.5 kg/sqm complete all as per manufacturer's instructions complete all as specified and as directed.
Dismantling old unserviceable RCC / PVC water tank capacity exc 500 and not exc 1000 ltrs & removal from site complete all as specified & as directed.
S&F 500 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc complete all as specified in SSR Part I complete all as specified & as directed.
S&F 1000 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc complete all as specified in SSR Part I complete all as specified & as directed.
M&L preparation of old concrete/ brick/ stone Surfaces of any description over 10cm girth or width, not otherwise described and applying one coats of synthetic enamel paint complete all as specified and as directed by eng in charge
S & F repair for Bathroom Duct Pipelines for Waste Water Pipe, Domestic Water Pipes and Riser supply downtake pipes fixing done with Pipe Supporting Clamping System having Profile Bracket + Slotted C Channel + U Bolt R/M System - 1. Waste Water Pipe 2 1/2" PVC, 2. Water Supply Down take lines 3/4" GI - 2 nos. and 3. Riser Supply Downtake pipelines 3/4" GI - 1 nos. running from Terrace to Ground Floor Vertical Fixed line with wall distance 3": Pipe Support Clamping made of 1. Profile Bracket Type A2 (Wall Distance 3") made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Slotted "C" Channel B3 Type to be used of size 20" (Continuous Slotted "C" Channel with ribs) made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing as per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade :- IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty.:- 1. Profile Bracket of A2 Type (Wall distance 3") - 2 Nos. 2. Continuous Slotted C Channel of B3 Type Size 20" - 1 No.; 3. U Bolt R/M for 2 1/2" PVC Pipe Dia. - 1 No.; 3/4" GI pipe Dia. - 3 nos. 4. Mono Bracket for 3/4" Pipe Wall Distance 3" - 1 no. and 5. Justi Khilla GI coated 2 1/2" - 4 nos. Pipe Support Clamping Unit fixing to be done at every metre distance in the duct as specified in the Technical Drawing. (Refer CE Jaipur Zone Technical Drawing no. TD/2022/01.) Make :- Shaivi or equivalent
S & F repair of Toilet Duct Pipelines for Soil Water Down take pipe fixing done with Pipe Supporting Clamping System having Profile Bracket + Slotted C Channel + U Bolt System - 1. Soil Water Pipe 4" PVC - 2 pipe and running from Terrace to Ground Floor Vertical Fixed line with wall distance 3": Pipe Support Clamping made of 1. Profile Bracket Type A2 (Wall Distance 3") made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Slotted "C" Channel B3 Type to be used of size 22" (Continuous Slotted "C" Channel with ribs) made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing as per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade :- IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty.:- 1. Profile Bracket of A2 Type (Wall distance 3") - 2 Nos. 2. Slotted C Channel of B3 Type Size 22" - 1 No.; 3. U Bolt R/M for 4" PVC Pipe Dia.- 2 Nos.; 4. Mono bracket for 4" CI pipe wall distance 4" - 1 no. and 4. Justi Khilla GI coated 2 1/2" - 4 nos. Pipe Support Clamping Unit fixing to be done at every metre distance in the duct as specified in the Technical Drawing.( Refer CE Jaipur Zone Technical Drawing no. TD/2022/01.) Make :- Shaivi or equivalent
S & F repair of Waste Water Supply pipelines fixing done with Pipe Supporting Clamping System having Profile Bracket + Slotted C Channel + U Bolt System - Waste Water Down take pipes 2 1/2" PVC - 1 no. running Vertical Fixed line from 1st floor to Ground floor with wall distance 4": Pipe Support Clamping made of 1. Profile Bracket Type A2 (Wall Distance 3") of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079) with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Slotted "C" Channel B3 Type to be used of size 10" (Continuous Slotted C Channel with ribs) made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079) are Hot Dip + Zn Al flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing as per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade:- IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty.:- 1. Profile Bracket of A2 Type (Wall distance 3") - 2 Nos. 2. Slotted C Channel of B3 Type Size 10" - 1 No.; 3. U Bolt R/M for 2 1/2" PVC pipe Dia. - 1 nos and 4. Justi Khilla GI coated 2 1/2" - 4 nos. Pipe Support Clamping Unit fixing to be done at every metre distance in the duct as specified in the Technical Drawing (Refer CE Jaipur Zone Technical Drawing no. TD/2022/01.) Make :- Shaivi or equivalent
S & F repair of Rain Water Downtake pipelines fixing done with Pipe Supporting Clamping System having Rain Water Bracket Set with Support + U Bolt System - Rain Water Down take pipes 4" PVC - 1 no. running Vertical Fixed line from Terrace to Ground floor with wall distance 3": Pipe Support Clamping made of 1. Rain Water Bracket Set 4" x 3" made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs. and U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing as per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty.: 1. Rain Water Bracket Set with Support 4" x 3" and U Bolt R/M for 4" PVC Pipe Dia. - 1 No.; and 3. Justi Khilla GI coated 2 1/2" - 2 nos. Pipe Support Clamping Unit fixing to be done at every metre distance in the duct as specified in the Technical Drawing. (Refer CE Jaipur Zone Technical Drawing no. TD/2022/01.) Make : Shaivi or equivalent
Supply only integral waterproofing compound ISI marked.
Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ
yash enterprises
ANKIT BUILDERS
ABHI CONSTRUCTIONS
Akhil Enterprises
M/S MAYANK ASSOCIATE
MSR INFRATECH
S.R.Enterprises
J.J.ENGINEERING
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .