REPAIRS REPLACEMENT OF INTERNAL ELECTRIFICATION FOR CERTAIN BUILDING INCLUDING REPLACEMENT OF CONVENTIONAL LIGHT FITTINGS WITH LEDs MCB DBs MCBs EARTHING AND SERVICE CONNECTIONS AT GURKHA CAMP AREA WELLINGTON STATION UNDER GE WELLINGTON

Amount

Taking down aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell etc, and making good disturbed surfaces with smooth finish matching with the existing surface of walls, floors, etc. all as specified and directed.

Point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed stranded copper conductor single core cable 1100 volts grade in and including PVC conduit medium grade complete with conduit fittings/accessories with provn of 1.2 mm thick MS/PVC terminal boxes of suitable size and 3 mm thick plastic laminated sheet top cover for housing of switches, sockets etc including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/Ex-fan point controlled by one switch 5Amps SP all as specified and directed.

All as per Item No 2 hereinbefore but One 3 pin 5A switch socket outlet on independent Board all as specified and directed.

All as per Item No 2 hereinbefore but One 3 pin 5A Socket outlet on same board complete all as specified and directed

All as per Item No 2 hereinbefore but point wiring complete with 4 sqmm FRLS cable for 3 pin 15 A socket outlet on independent board including 4 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed.

Point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed stranded copper conductor single core cable 1100 volts grade in and including PVC casing and caping complete with fittings/ accessories with provn of 1.2 mm thick MS/PVC terminal boxes of suitable size and 3 mm thick plastic laminated sheet top cover for housing of switches, sockets etc including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light /Ex-fan point controlled by one switch 5Amps SP all as specified and directed.

All as per Item No.6 hereinbefore but One 5A switch socket outlet on independent Board all as specified and directed.

All as per Item No 6 hereinbefore but One 5A Socket outlet on same board complete all as specified and directed

All as per Item No 6 hereinbefore but point wiring complete with 4 sqmm FRLS cable for 3 pin 15 A socket outlet on independent board including 4 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed.

Material and labour for Point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed stranded copper conductor single core cable 1100 volts grade in and including PVC conduit medium grade in concealed complete with conduit fittings/ accessories including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/Ex-fan point controlled by one switch 5Amps SP all as specified and directed. Note: 1. Sunken box/ Cover plate for modular plate for modular switches, sockets etc will be measured and paid separately under relevant items and blank plate required if any will be deemed included in the item rate. 2. Cutting chases in stone masonry wall will be measured and paid separately.

All as per Item No 10 hereinbefore but One 5 Amps socket out let on independent Board all as specified and directed.

All as per Item No.10 hereinbefore but point wiring complete with 4 sqmm FRLS cable for 3 pin 15 A socket outlet on independent board including 4 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed.

All as per item No.2. hereinbefore but point wiring One light point controlled by two 2 - way switches, with cables 1.5 sq.mm FRLS size all as specified and directed.

All as per Item No.2 hereinbefore but point wiring for each additional light point on the same switch circuit all as specified and directed.

All as per Item No.2 hereinbefore but point wiring complete One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size FRLS all as specified and directed.

Switch piano flush type 5 Amps SP, one way all as specified and directed.

Switch piano flush type 15 Amps, all as specified and directed.

Switch piano flush type 15 Amps 2 way SP all as specified and directed.

Lamp holder, PVC/ Polycarbonate type with cord grip cap suitable for pendant fittings all as specified and directed.

Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all as specified and directed.

Switch socket combination 2 in 1 , 5 Amps multipurpose flush type with PVC surface box all as specified and directed.

Switch socket combination 3pin 5A /15 A flush type, 2 in 1 all as specified and directed.

Bell Multi Music type 230 volts single pole all as specified and directed.

Bell push flush type 5 A all as specified and directed.

Ceiling rose, 3 terminals PVC / polycarbonate, isolated body all as specified and directed.

Modular switch one way 6A 230V AC 50 HZ SP one module all as specified and directed.

Modular switch one way 16A 230V AC 50 HZ SP one module all as specified and directed.

Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module all as specified and directed.

Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module all as specified and directed.

Modular Bell push 6A 230V, AC 50 Hz SP One module all as specified and directed.

PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100mm x 100mm x 50mm deep all as specified and directed. Make: Havells/ Legrand/ L&T.

PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 175mm x 100mm x 50mm deep all as specified and directed. Make: Havells/ Legrand/ L&T.

PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 200mm x 150mm x 50mm deep all as specified and directed. Make: Havells/ Legrand/ L&T.

PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 250mm x 200mm x 50mm deep all as specified and directed. Make: Havells/ Legrand/ L&T.

PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 350mm x 300mm x 50mm deep all as specified and directed. Make: Havells/ Legrand/ L&T.

Modular Metal Flush Box 1 or 2 module all as specified and directed. Make: Havells/ Legrand/ L&T.

Modular Metal Flush Box 3 module all as specified and directed. Make: Havells/ Legrand/ L&T.

Modular Metal Flush Box 4 module all as specified and directed. Make: Havells/ Legrand/ L&T.

Modular Metal Flush Box 6 module all as specified and directed. Make: Havells/ Legrand/ L&T.

Modular White Cover Plate with Frame White cover plate with frame, 1 module all as specified and directed. Make: Havells/ Legrand/ L&T.

Modular White Cover Plate with Frame White cover plate with frame, 2 module all as specified and directed. Make: Havells/ Legrand/ L&T.

Modular White Cover Plate with Frame White cover plate with frame, 3 module all as specified and directed. Make: Havells/ Legrand/ L&T.

Modular White Cover Plate with Frame White cover plate with frame, 4 module all as specified and directed. Make: Havells/ Legrand/ L&T.

Modular White Cover Plate with Frame White cover plate with frame, 6 module all as specified and directed. Make: Havells/ Legrand/ L&T.

Modular White Cover Plate with Frame White cover plate with frame, 8 module all as specified and directed. Make: Havells/ Legrand/ L&T.

Taking down unserviceable DBs with MCBs and Supply and fix MCB DB SPN 4 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed. Make: ABB/ Legrand/ L&T.

Taking down unserviceable DBs with MCBs and Supply and fix MCB DB SPN 8 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed. Make: ABB/ Legrand/ L&T.

Taking down unserviceable DBs with MCBs and Supply and fix MCB DB TPN 4 way 415 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed. Make: ABB/ Legrand/ L&T.

Taking down unserviceable DBs with MCBs and Supply and fix MCB DB TPN 8 way 415 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed. Make: ABB/ Legrand/ L&T.

Supply and fix 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed. Make: ABB/ Legrand/ L&T.

All as per item No. 50. hereinbefore but SPN 230V 32 Amps capacity all as specified and directed.

All as per item No. 50. hereinbefore but MCB TPN 415V 40 to 100 Amps capacity all as specified and directed.

Emergency LED bulb operating voltage 120-300 V AC IP 20 wattage 9 CCT 6500K lumen output 900 (Main) 350 (Battery) 4hr backup B-22 holder type all as specified and directed. Make: Panasonic Product code- PBUM13097 or equivalent in Philips/Bajaj.

Taking down old unsv FTL fittings, Supply and fix 20W LED batten light Lum output 2000 CCT 6500K Size 115x2.5x3.5 cm comprises of thermally conductive material pre-wired with high efficiency electronic driver, high translucent serrated milky white diffuser gets glare free, smooth light distribution lamp colour white all as specified and directed. Make: Panasonic Product Code-. PBTM01207 or equivalent in Philips / Bajaj.

Taking down old unsv FTL fittings, Supply and fix 24W LED batten light Lum output 2400 CCT 6500K Size 115x2.5x3.5 cm comprises of thermally conductive material pre-wired with high efficiency electronic driver, high translucent serrated milky white diffuser gets glare free, smooth light distribution lamp colour white all as specified and directed. Make. Panasonic Product Code-. PBTM06247 or equivalent in Philips / Bajaj.

Taking down old unsv FTL fittings, Supply and fix 10W LED batten light Lum output 1000 CCT 6500K Size 59x2.2x3.4 cm comprises of thermally conductive material pre-wired with high efficiency electronic driver, high translucent serrated milky white diffuser gets glare free, smooth light distribution lamp colour white all as specified and directed. Make: Panasonic Product Code-. PBTM01107 or equivalent in Philips / Bajaj.

LED bulk head light fitting 12 W 6500K lumen output 1080 including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed. Make: Panasonic Cat Part No-PBHM02127 or equivalent in Philips / Bajaj

Round shape 24 watt 220 volts AC 6500K lumen output 2400, 20 cm dia x 3.1 cm rimless surface panel type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make: Panasonic product code- PPAM16247R1 or equivalent in Philips/ Bajaj

All as per item No 58 hereinbefore but 18 watt all as specified and directed. Make: Panasonic product code- PPAM16247R1 or equivalent in Philips/ Bajaj

Taking down old unserviceable post top light fittings and supply and fixing of aesthetically designed IP65 20 Watts CCT 5700K LED Post Top light luminarie comprises of spun aluminium top cover, aluminium heat sink, frosted polycarbonate diffuser and die cast aluminium mounting base size 330 (L/dia) x 330 (W/Dia) x 405 (H) mm all as specified and directed. Make: Panasonic product code- PPTM02204 or equivalent in Wipro/ Philips

Taking down unserviceable building security light and Material and labour for LED (street) Security Light fitting of 15 Watt comprising of eposy powder coated housing enclosed with glass all as specified and directed.

Taking down unserviceable building security light and Material and labour for LED (street) Security Light fitting of 25 Watt comprising of eposy powder coated housing enclosed with glass all as specified and directed.

Taking down unserviceable building security light and Material and labour for LED (street) Security Light fitting of 45 Watt comprising of eposy powder coated housing enclosed with glass all as specified and directed.

GI Pipe Medium Grade 40 mm bore bracket of suitable size bent to shape of not less than 1.2m long with clamp made of GI flat Iron of size 32 x 6mm for street light fittings, duly painted with one coat of red oxide primer and two coats of aluminium based paint, fixed on poles with bolts, nuts and washers including taking down old brackets complete all as specified and directed.

Taking down old unserviceable geyser and Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, PVC connection piece etc. all as specified and directed. Make: Crompton/ Bajaj/ Racold / venus / V Gaurd

PVC connections 15mm size with PTMT nuts of length 300mm all as specified and directed.

Bib tap of size 15mm bore standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) in repairs all as specified and directed

PVC insulated copper conductor flexible cable 3 core 1.5 Sqmm including taking down old unserviceable copper conductor complete including testing all as specified and directed.

Takingdown unserviceable Plug and socket and Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 20A SP MCB all as specified and directed. Make-Legrand/ABB/Havells

Taking down Submain wiring with aluminium conductor along with PVC Conduit and Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed. Note: 3 runs of cable and one run of conduit pipe together measured as one RM

All as per Item No 70 hereinbefore but in and including casing caping all as specified and directed

Taking down Submain wiring with aluminium conductor along with PVC Conduit and Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed. Note: 3 runs of cable and one run of conduit pipe together measured as one RM

All as per Item No 72 hereinbefore but in and incl casing caping all as specified and directed

Earthing complete with galvanized steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized earth wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical platee No 3 connected to earth testing point including necessary excavation, earth work, PCC pit ,RCC cover 1:2:4 B1 with 8 mm dia MS bars at 100 c/c, funnel, watering pipe etc. all as specified and directed including testing on completion.

Supply and fix in repairs Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire all as specified and directed.

Cutting chases in stone masonry wall/concrete floor/roof for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3, and making good, cutting not exc 10cm girth all as specified and directed.

Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as directed for 15 mm bore GI pipe and all as specified and directed.

15 mm bore Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm including making openeing brick/stoan Masaonary Wall as per reqiurement of Exhuast Fan and make good and matching with existing surfaces complete all as specified and directed. Make: Khaitan/Havells/Bajaj

sree devi construction

Saket Enterprises