CERTAIN REPAIR TO DRAIN, FENCING AND SEWAGE PIPE LINES WITH OTHER CONNECTED WORKS IN MURADPUR, KHASA AND 230SU UNDER AGE (I) AIR FORCE AMRITSAR

Amount

S&F chain link MS galvanised fencing made of 3.98 to 4.00mm thick (08 Guage) galvanised wire and the length of side of mesh of 50 to 56.50mm (Gap) weight of chain link fence (exc 4 Kg/Sqm) complete fixed to the fencing posts as indicated or as directed by Engr-in Charge.

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; including all necessary drilling, welding, bolting or riveting, etc., conforming to Fe-410- W(Gde- E-250) complete all as specified and directed by Enge in charge.

S&F Mild steel round bars (410- W(Gde- E-250) 6 to 8mm dia as in chain link fencing, fixed to concrete post with mild steel nuts, bolts and washers and tying to GI chain link fencing with 2mm dia GI wire complete all as specified and directed

Supply & Fixing Mild steel flat iron conforming to Fe 410-0 as in rail/fillets for securing chain link fencing including drilling holes etc. all as specified and directed by Engr-in-charge.

Excavation in post holes (or similar holes) each not exc. 0.5 Cum and getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc. 25 cm, watering and removing surplus spoil to a distance not exc. 50 m and making good surface in soft / loose soil complete all as specified and directed.

M&L for dismantling posts or struts (wood , steel or RCC ) any section in concrete, brickwork etc. including taking out embedded portion and making good disturbed ground surface all as specified and directed by Engr-in-charge.

M&L for dismantling of fencing wiremesh of anytype all as specified and directed by Engr-in-Charge.

M&L for two coat of synthentic enamel paint over a coat of red oxide primer on new steel surface of any description over 10 cm width or girth not otherwise described including prepartion of surface complete all as specified and directed.

Demolition of cement concrete ( unreinforced) of any description and in any position not otherwise specially provided for complete all as specified and directed

M&L PCC 1:3:6 type C2 using 40 mm graded crushed stone aggr as in foundation, filling and mass concrete specified and directed by engineer in charge.

M&L PCC 1:4:8 type D-2 using 40mm graded crushed stone aggr as in sub base/foundation all as specified and directed by engineer in charge.

Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved design & pattern and colour as in footpath , parks , lawns,drive ways or light traffic parking etc. of required strength , thickness & size/shape, made by table vibratory method using PU mould , laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand , compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator,filling joints with sand and cutting of paver block as per required size and pattern,finishing and sweeping extra sand including coping at sides of tiles from PCC1:2:4 all as specified and directed by engineer in charge.

Providing and laying at or near ground level factory made kerb stone/saucer drain of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

M&L 25 mm thick PCC 1:2:4 using 20mm graded crushed stone aggr as in sub base all as specified and directed by engineer in charge.

M&L for coloured vitrified tiles heavy duty area of each tiles exceeding .06 sqm to .18 sqm 8-10mm thick, colour and design as approved, set and jointed using neat cement slurry and pointed in coloured cement or white cement mixed with pigment to match the surface, laid over and including 15 mm thick screed bed or bedding layer in CM (1:6), complete all as specified and directed by Engr-in-charge

Material and labour for taking down cement plaster of any description on brick walls/ceiling , etc including raking out joints , hacking for key scrubbiong down with water etc complete all as specified

Material and labour for 15mm thick cement plastering on fair faces in cm 1:4 on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement but with using water proofing compound upto height 12 mtr complete all as specified and directed by engineer in charge

Prepration of newly plastered surfaces of walls, pillars, cornices,jafri etc. by brooming down and Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.Complete all as spc upto height 7.5 mtr

Material and labour for preparation of newly plastered surface and applying two coats of first quality Acrylic weather coat emulsion paint on walls/facias/roof top/ramp Surface etc in disruptive pattern having percentage of Six- colour as 29.04% of RGB Value (143, 152, 113), 22.48% of RGB Value (112,139,86), 14.98% of RGB value (123,137,126), 13.80% of RGB Value (84,97,75), 14.15% of RGB Value (123, 137, 94) and 5.55% of RGB Value (206,193,141) as per sample approved by AGE(I) for building of height upto 9.5meter, over and including a coat of alkali resistance primer complete all as specified and directed. Note:-The rate quoted by contractor is demmed to includes preparation of surfaces of wall/roof(PCC/bricktiles) cleaning with wire brushes and necessary scaffolding for painting upto required height.

De-watering of septic tanks ,soakage wells,sump , static water tanks and grease trap of any depth, with sewer suction cum jetting machine /super honey sucker machine and draining out the same and taking out thick/solid sludge (sedimented sand sludge/grit ,ash rages , fibres and springe material etc)disposal of sludge/liquid outside MOD land in pit to be dug out side and covering top with a layer of 25 mm thick earth filling compacting and levelling all as specified and directed by Engineer-in-Charge. , complete, all as directed and to the entire satisfaction of Engineer-in-Charge. (i) Digging of pit shall be deemed to be included in unit rate. (ii) Contractor will maintain the hygienic condition in area all the time by taking suitable required measures. (iii)Cost of earth work in the pit is deemed to be included in the unit rate quoted by the tenderer). (iv) Manual cleaning will be done with wirebrush and other tools to remove algae and other greasy material after dewatering in case of static water tank.

Excavation in trenches not exc 1.5m wide and not exc 1.5m deep and getting out in soft/loose soil complete all as specified and directed by .

Returning,filling in trenches including spreading watering and well ramming in layers not exc 25cm thick in soft.loose soil complete all as specified and as directed .

Removing excavated materials to a distance not exc 50m and depositing where directed by EIC at a levlel not exc 1.5 m above the starting point.

Demolition of brick work built in cement mortar including all quoins,arches pillars etc all as specified and directed by Engr-in-Ch.

M&L for Brick work built in cement mortar 1:6 using old size sub class "B" bricks in wall straight or curved on plan exc 6m mean eadius complete all as specified and directed .

M&L for Providing PCC 1:2:4 type B-1 using 20mm graded crushed stone aggragate as in benching & coping including necessary form work complete all as specified and directed .

M&L for 15mm thick rendering in cement mortar(1:6) on other than fair face of brick work or concrete surfaces finished surface even and smooth with using extra cement complete all as specified and as directed by EIC.

Material and labour, preparing of newly plastered surfaces of wall and applying two coats of white wash complete all as specified and directed.

Demolition and breaking up drain pipes 150 mm internal dia( SGSW/NP-2 pipe), AC or reinforced concrete set in cement mortar complete all as specified and directed .

Demolition and breaking up drain pipes 200 mm internal dia( SGSW/NP-2 pipe), AC or reinforced concrete set in cement mortar complete all as specified and directed .

M&L for Cement concrete bed to drain pipe and packing under haunching against side of pipes after laying in PCC (1:3:6) type C-2 using 40mm graded stone aggregate for 150mm dia SGSW / RCC NP-2 pipe complete all as secified and directed

M&L for Cement concrete bed to drain pipe and packing under haunching against side of pipes after laying in PCC (1:3:6) type C-2 using 40mm graded stone aggregate for 200mm dia SGSW / RCC NP-2 pipe complete all as secified and directed

M&L for 150mm internal dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and jointed in cement mortar complete all as specified and directed

M&L for 200mm internal dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and jointed in cement mortar complete all as specified and directed

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for

M&L for providing precast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in precast manhole cover slab,chullah hoods, chajjas and other similar articles with plain faces including necessary form work complete all as specified and as directed

M&L mild steel TMT bars 6 to 8mm dia and cut to length bent to shape required inclduing cranking bending spirally for hooping ends and binding with and incl mild steel wire (annelaed) not less than 0.90 mm dia or securing with clips.

Cleaning of underground sewage pipe line of 150mm dia including manholes by using suitable measures required as per site condition ( i.e sewage suction cum jetting machine. ) and taking out all liquid ,solid waste matters,sewage and sludge,night soil refuse etc and burying in a pit to be dug out side the defence land and covering top of pit with earth in layers of 25mm thick ness each complete all as specified and as directed .(The rate shall be deemed to include cleaning of manholes also and the length shall be measured including manholes.)

ditto as per Ser Item No 38 above but 200 mm dia.

Dewatering and cleaning of man hole not exc 1.5 m depth, incl removing solid/liquid waste material from Man hole /tanks/pits by sewer suction machine/Honeysuckers or similar arrangement and depositing off the material to a distance exc. 1000 mtrs all as entirily complete satisfaction of Engineer-in-charge.

Dewatering and cleaning of man hole exc 1.5m depth but not exc 3.00 m depth, incl removing solid/liquid waste material from Man hole /tanks/pits by sewer suction machine/Honeysuckers or similar arrangement and depositing off the material to a distance exc. 1000 mtrs all as entirily complete satisfaction of Engineer-in-charge.

Cutting into existing manholes for connecting new drains 150mm internal dia old pipe and making good to pipe and rendering cutting out existing benching for forming branch channel (1/2 Band to 3/4 section ) in PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate smooth finished, and reforming benching as required all as specified and directed

Cleaning of blocked/chocked gully trap, floor trap,WHB, WC etc upto first man holes of any type and any dia and depth removing the sludge/solid content by mechenical method and cleaning the sewage line upto first manhole by mechanical means at the discretion of the contractor at his own arrangement so as to remove the blockage and making the sewer line/manhole fully functional to the entire satisfaction of Engr In Charge including removing the sludge beyond 50 mtr from bldg and repositioning the manhole cover in position and refixing of grating complete all as specified & directed by Engineer-in- charge.

M&L for Cleaning of blocked manholes of depth not exceeding 1.5 m, of any size, bailing out sludge/foreign matter and removing the same and burying in grounds at depth 1.00Mtr below GL at a distance n.exc 50 Mtr and placing back the manhole cover in original position

All as per item No. 44 above but depth exceeding 1.5 m and not exceeding 3.0 m etc complete all as specified.

Material and labour for applying one coat of exterior plastic emulsion paint on PCC kerb stone surface including making good to the surface of kerb stone by applying and rendering joints with CM 1:4 complete all as specified and directed by engineer in charge. Make - Asian Paints,Berger and Nerolac.

S&F 32 mm dia PVC flexible pipe of suitable length for wash hand basin or urinal fixed in repairs complete all as specified and directed.

Note: The Total amount shall subject to adjustment of credit for old Materials as per Schedule of Credit.

M/S SIMRAN WALIA ENTERPRISES (BID ID -3486066)

S S CONSTRUCTION COMPANY (BID ID -3486691)