Restoration and Road Repair Work from Km. 7.800 to Km. 15.000 of Atta margimar Bundh on left Bank of River Yamuma in Distt. Gautambudh Nagar.

Amount

Earth work by power transport in embankment above 1.5m height including removal of 20cm humes from bund seat and 15cm from borrow area including cost & excavation of earth, loading, unloading, manual compaction, proper dressing to profile, all lead & lift &, labour, T & P required for proper completion of work

Uprooting Jhunds including backfilling and dressing with all cost of labour, T& P for proper completion of work

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per direction of Engineer-in-charge for proper completion of work. (a)For 1st Layer 75 mm. thick

(b)For 2nd Layer 75 mm. thick

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density as per direction of Engineer-in charge for proper completion of work

Providing and applying prime coat with SSI grade bitumen emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means for proper completion of work

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom for proper completion of work

Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction for proper completion of work

Dismantling of dry brick on edge soling and stacking of dismantled bricks, all labour, T & P for proper completion of work direction of Engineer in charge.

Laying of straight overburnt brick on edge on both side of road including filling joints with local sand, cost of all materials, labour, T & P, finished to the required template and in proper alignment for proper completion of work

Scraping old painted surface including disposal of all scraped material to a distance of 1.0 km. including cost of all machinery, labour, T & P for proper completion of work as per direction of Engineer in charge.

Supply & laying of I shaped precast cement concrete Interlocking tiles of thickness 80 mm (Compressive strength not less then 30Mpa and weight 4.50Kg.) including 25mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand for proper completion of work

M/s B.B.Goyal

M/S AJAY KUMAR