WELCOME MAINT TO VARIOUS MD ACCN IN WING - III AREA UNDER GE NASIK ROAD.

Amount

M&L for complete removal of existing treatment on Internal wall surfaces by brooming down or steel wire brushing;scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spots; washing,sealing holes,cracks of any width/depth with crack sealing compound/putty. Note :- work is to be executed at any height and situation.

M&L for complete removal of existing treatment on Internal ceiling surfaces by brooming down or steel wire brushing;scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spots; washing,sealing holes,cracks of any width/depth with crack sealing compound/putty. Note :- work is to be executed at any height and situation.

M&L for 1.0 mm thick wall care putty on wall surfaces as per manufacturers instruction.

M&L for 1.0 mm thick wall care putty on ceiling surfaces as per manufacturers instructions.

M&L for applying one coat of interior primer over wall surfaces as per manufacturers instruction.

M&L for applying one coat of interior primer over ceiling surfaces as per manufacturers instruction.

M&L for applying two coats of acylic distemper oil emulsion on wall surfaces.

M&L for applying two coats of acylic distemper oil emulsion on ceiling surfaces.

M&L for applying one coat of acylic distemper oil emulsion on wall surfaces including preparation of surfaces and filling cracks and holes of any size with putty.

M&L for applying one coat of acylic distemper oil emulsion on ceiling surfaces including preparation of surfaces and filling cracks and holes of any size with putty.

M&L for complete removal of existing treatment on external wall surfaces by brooming down or steel wire brushing;scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spots; washing,removing nails,removing vegetation/plant growth of any size and penetration to the entire satisfaction of ground executives,sealing holes,cracks of any width/depth by water proof crack sealing compound(premium quality as approved by GE). Note :-work is to be executed at any height and situation.

M&L for complete removal of existing treatment on external Ceiling surfaces by brooming down or steel wire brushing;scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spots; washing,removing nails,removing vegetation/plant growth of any size and penetration to the entire satisfaction of ground executives,sealing holes,cracks of any width/depth by water proof crack sealing compound(premium quality as approved by GE). Note :-work is to be executed at any height and situation.

M&L for applying one coat of exterior primer on wall surfaces as per manufacturers instruction

M&L for applying one coat of exterior primer on Ceiling surfaces as per manufacturers instruction.

M&L for applying two coats of exterior emulsion paint on wall surfaces.

M&L for applying two coats of exterior emulsion paint on ceiling surfaces.

M&L for applying one coat of exterior emulsion paint on wall surfaces including preparation of surfaces by removing moss,effolorescent etc,filling cracks/holes by putty complete all as specified and directed.

M&L for applying one coat of exterior emulsion paint on Ceiling surfaces including preparation of surfaces by removing moss,effolorescent etc,filling cracks/holes by putty complete all as specified and directed.

Taking down completely cement or cement lime plaster,any description on brick or stone walls etc. including raking out joints,hacking for key,scrubing down with water etc. Note :- Work to be executed at any height and situation.

M&L for rendering 15mm thick in cement mortar 1:4 on wall surfaces finished fair and even. Note :- The work is specificially required to be executed for B range ht 15m and above

M&L for rendering 10mm thick in cement mortar 1:6 on wall surfaces finished fair and even.

M&L for rendering 5 mm thick in cement mortar 1:3 on ceiling surfaces finished fair and even.

M&L for applying a coat of alkali resistant primer on wall surfaces including preparation of plastered surfaces. Note :- The work is specificially required to be executed for B range ht 15m and above

M&L for applying two coats of cement base paint on wall surfaces. Note :- The work is specificially required to be executed for B range ht 15m and above

M&L for preparation of old painted wooden surfaces of any description,not otherwise described,over 10cm width or girth and applying one coat of synthetic enamel paint.

M&L for preparation of old painted steel surfaces of any description,over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint of tint as directed by engr-in-charge.

Demolition of brickwork or stone/boulder masonry,built in cement mortar or cement lime mortar including all quoins,arches,pillars etc.

M&L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6

M&L for Repairing of broken edges of RCC chajjas, roof projections, fins, facia and similar works by dismantling of loose and damaged/ disintegrated portion of edges (cross sectional area not exceeding 150 sqcm) with cement mortar 1:4 or cement concrete 1:1½:3 type A0 and chicken wire mesh with nails (to hold fresh mortar/concrete) including necessary formwork ,sccaffolding etc. Note :- work is to be executed at any height any situation.

M&L for plastering on walls in cement mortar 1:4 in patches not exc 3sqm on the building over and including taking down old plastering on walls,any description including finishing the surface including necessary sccaffolding etc. Note :-work is to be executed at any height and situation.

Dismantling floor,hearth or wall tiling including cement mortar bedding(but not backing),removing debris out of MOD land and rubbish off the premises.

M&L for 40mm thick cement concrete 1:2:4 type B0 (using 12.5 mm graded aggregate) as in levelling course to flooring etc.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat in CM 1:4.

M&L for 8-10mm thick double charged vitrified tile ,area of each tile not exceeding 0.36 Sqm as in flooring,laid in any shape/pattern over and including 15mm thick screed in CM 1:6 as in floors,jointed in neat cement slurry and pointed in white cement to match the shade of the tile.

M&L for 8-10 mm thick double charged vitrified tile,area of each tile not exceeding 0.36 Sqm as in skirting,laid in any shape/pattern over and including 10mm thick backing coat in CM 1:4 and pointed in white cement to match the shade of the tile.

M&L for special treatment to sunken portion with 10mm thick plaster in CM 1:4 by using Ditachment DM 1% by weight of cement and surface made smooth. After curing period, two coat of Ditachment DS shall be applied @2.50 Kg/Sm. The paste like consistancy is made by using 2.5 Kg of Ditachment DS powder in one litre of admixture (The admixture is made by dissolving 1 part by volume of Nafufill SBR & 4 part by volume of water). After 3 days curing, testing shall be done by flooding for 24 hours. Finally protective plaster coat of 10mm thick in CM 1:4 shall done by using Putz Ditachment 1% by weight of cement over layer of Detachment DS. All joints of CI Pipe, Nahani trap, WC connection etc. shall be filled by mixture of cement, fine sand and 10% Nafufill SBR by weight of cement. 32mm dia and 500mm long GI Spout light grade shall be provided in all sunken slabs to drain off water. Note : work is required to be executed on top priority basis.urgency factor and extra laobour cost shall be deemed to be included by contractor while quoting.Nothing extra shall be paid.

S&F in repairs Vitreous China water closet squatting pan, 'Orissa pattern' size 580 x 440 mm white,with intergral foot rests and P/S trap(excluding flushing cistern and flush pipe) complete including provision of lime concrete bedding.

S&F in repairs 10 litres capacity PVC valveless,syphonic action type,flushing cistern.low level,white,with inlet,ball valve.float and handle including flush pipe and brackets complete all as specified and directed.

S&F in repairs Vitreous china Premium/1st quality wash down water closet wall hung EWC white/ivory/off white(closed pattern incl all necessary accessories like rag bolts/gel gasket,sheet cover,jet spray etc over and including flush pipe complete in all respect all as specified.

S&F in repairs Vitreous china wash basin white,flat back,size 550 x 400 mm,including cutting for and pining in ends of bracket or erecting stand,with and including 32mm waste fitting brass,chromium plated with long screwed shank and fly nut,flange end bedded in red lead cement,brass chromium plated bottle trap with inlet and outlet screwed for pipe or connections 32mm bore,including necessary packing,union and cap and fixed in repairs.

Taking up or down steel tubing and connections15 mm bore including cleaning for re fixing or removal to store Note :- work is to be done in multistorey bldgs(int and ext plumbing)

Refixing old steel tubing and connections 15mm bore in new or old position(wall,ceiling,floors,etc.) Note : GI tubing shall be concealed wherever directed by Engr-in-charge.contractors quoted rates deems to be inclusive of the said provision.

S&F 15mm bore galvanised steel water tubes, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceiling or laid in floors. Note : GI tubing shall be concealed wherever directed by Engr-in-charge.contractors quoted rates deems to be inclusive of the said provision.

Supplying and laying of CPVC concealed pipes 20mm outside dia pipe SDR 11 & plain CPVC SDR 11 fittings in ceiling/wall/floors complete all as specified(Internal plumbing shall be concealed)

Taking up or down steel tubing and connections 20 mm bore including cleaning for re fixing or removal to store Note : work is to be done in multistorey bldgs(int and ext plumbing)

Refixing old steel tubing and connections 20mm bore in new or old position(wall,ceiling,floors,etc.) Note : GI tubing shall be concealed wherever directed by Engr-in-charge.contractors quoted rates deems to be inclusive of the said provision.

S&F 20mm bore galvanised steel water tubes, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceiling or laid in floors. Note : GI tubing shall be concealed wherever directed by Engr-in-charge.contractors quoted rates deems to be inclusive of the said provision.

Supplying and laying of CPVC concealed pipes 25mm outside dia pipe SDR 11 & plain CPVC SDR 11 fittings in ceiling/wall/floors complete all as specified(Internal plumbing shall be concealed)

S&F in repairs 15mm bore bib taps,fancy type,cast copper alloy,chromium plated with crutch or butterfly handle,screwed down,screwed for iron pipe or for brass ferrule and fixed in repair.

S&F in repairs hand shower(health faucet) 1Mtr PVC tube with wall hook (CP) complete all as specified and directed.

S&F in repairs brass CP wash basin mixer for mixing hot & cold water screwed down for iron pipe and 15mm bore.

S&F in repairs brass CP mixer for mixing hot and cold water,screwed down for iron pipe 15mm bore.

S&F in repair 15mm bore fancy type pillar taps,cast copper alloy,with capstan heads,chromium plated,screwed down high pressure,with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts.screwed for iron pipe and fixed.

S&F in repairs 15mm bore stop valves,cast copper alloy,fancy type,chromium plated(anlge type) screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed.

S&F in repairs 15mm bore stop valves,cast copper alloy,fancy type,chromium plated with long shank and cup(concealed type) screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450 mm.

S&F 32mm bore low density polyethylene(LDPE) pipes of pressure rating 6kgf/sqcm including fittings.

S&F in repairs brass chromium plated shower rose 125mm size with swivel joint,including fixing to steel pipe or union 15mm bore.

S&F in repars sink made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 495mm x 420mm bowl size 410mm x 330 mmx 160mm. .

S&F in repairs Stainless steel sink with draining board, made out of 1.0mm thick sheet for kitchen or laboratory with plug,washers,waste pipe, cast iron cantilever brackets, connecting union overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm.

Dismantling stone slabs and tiles of any description or thickness in floors,aprons etc laid bedded and pointed in any mortar.

M&L for 18 to 20 mm thick Granite work (Table rubbed and polished) in steps,jambs,pillars,window cills,cooking platforms and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 18 to 20mm thick.over and including different type shade/colour all as specified and directed. Note : In aluminium windows granite shall be used in jambs of windows,in 100mm width(minimum).contractors quoted rate deems to be inclusive of the said provision.

M&L for machine cut cudappah stone slab 20-25mm thick over 10 mm thick cement screed base in CM 1:4,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polshing complete.

Rounding to edges of stone slabs one edge,such as in steps,cooking platform and other similar situations(stone slabs so provided shall not be less than 900mm in length).

Dismantling water tanks exc 250 ltr & n exc 500 ltr capacity and removing to store

S&F Rotational moulded polyethylene water storage(capacity 500 ltr) tanks(cylindrical vertical with closed top and double layered) hoisted and fixed in position all as specified in SSR Part-I(ISI marked).

Dismantling water tanks exc 500 ltr & n exc 1000 ltr capacity and removing to store

S&F Rotational moulded polyethylene water storage (capacity 1000 ltr) tanks(cylindrical vertical with closed top and double layered) hoisted and fixed in position all as specified in SSR Part-I(ISI marked).

S&F ball valves,20mm bore high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed.(minimum weight 210 gms) fixed in repairs(ISI marked).

M&L for fixing in repairs 25 mm bore matt finish stainless steel(SS-304 grade) curtain rod weighing 0.275gm/m ,best quality as approved by Engr-in-charge over and including suitable projecting type brackets,end finals,socket for dead ends of pipe as the case may be complete all as specified and directed.

Disconnecting existing tanks exc 250 n exc 500 Ltrs,setting aside(or lowering if required) cleaning and removing all scale,dirt etc. from the mouth of circulating pipes etc and hoisting if required,reconnecting and refixing in position. Note : Work is to be execute at any height and situation.

Disconnecting existing tanks exc 500 n exc 1000 Ltrs,setting aside(or lowering if required) cleaning and removing all scale,dirt etc. from the mouth of circulating pipes etc and hoisting if required,reconnecting and refixing in position. Note : Work is to be execute at any height and situation.

Taking down AC rain water pipes(any size or pattern) including all fittings,head shoes,bends,swan neck etc. Note : work is to be executed at any height and situation.

S&F PVC(SWR) pipes 110mm bore single socketed,in any length with rubber ring joints,laid in trenches or in floors/walls as RWP over and including fixing clamps,bends,Tee etc. Note : work to be executed at any height and situation.

S&F PVC(SWR) pipes 75 mm bore single socketed,in any length with rubber ring joints,laid in trenches or in floors/walls including all bends,Tee,PVC fixing clamps etc. Note : work to be executed at any height and situation.

Dismantling wall and ceiling boards(fibre,pulp,insulation,etc.) or insulation boards/slabs/blankets,kitchen cabinets board any thickness,including cover fillets,frame etc.

M&L for 18-20mm thick both side prelaminated(decorative type) solid wpc board as in kitchen cabinets,partition etc over and including suitable butt hinges of ss,magnetic catcher,beading, ball bearing, runners, ss handles telescopic channel etc complete all as specified and directed to make the shutters / partition / drawers fully functional.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 60x30(single/double rebated) mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.over and including M.S. hold fast/ lugs or SS dash fasteners.

Demolition of concrete(unreinforced) of any description and in any position not otherwise specifically provided.

M&L for Cement concrete 1:4:8 type D-2(using 40 mm graded aggregate only) as in foundation,filling mass concrete and sub bases.

M&L for broken stone/boudlers as in Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by engr-in-charge.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering. Note : Moorum to be brought out of MOD land.quoted rate also deemed to be inclusive of surface dressing and site clearance.

M&L for rough shahabad stone 25mm to 30mm thick in flooring/plinth over and including 20mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in CM 1:4 complete all as specified and directed.

M&L for Chequered cement concrete tiles with grey cement and pigment 30cm x 30cm x 25mm thick, with rubber moulded glossy finished surface, laid in floors over and including 15mm thick cement mortar screed bed in cement mortar 1:6, set jointed in neat cement slurry and pointed in CM 1:4 as in floors/Plinth protections.over and including provision of PCC 1:2:4 as in filleting/edging to the sides of paver path/hardstanding as per standard engineering practice to the entire satisfaction of engr-in-charge.

Supply and fix in repairs kitchen plate rack made out of stainless steel 0.8mm thick complete of size not less than 750x750x200mm ,duly assembled and fixed to wall with wall screws/fasterners all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail 'D' shape 20mm dia 600mm long.

S&F in repairs plastic seat cover white closed pattern with flat bottom and cover with mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repairs Stainless steel wire cloth 0.56mm nominal dia of wire and average witdth of aperture 1.00mm and fixed with stainless steel wire staples or wooden beading complete.

S&F in repairs PVC (SWR) floor trap,75mm plain with grating including jointing with solvent cement.

S&F in repairs 6mm thick glass shelf "Corner" type size 300mm x300mm including necessary brackets front edge of glass rounded and woulded with CP railing complete.

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 49,021.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

Vinod Enterprises (BID ID -3283341)

UNITED ENTERPRISES (BID ID -3286677)

SVT ENGINEERS AND CONTRACTOR. (BID ID -3282970)