Construction of RCC Bridge No 2/1 of span 25.00m on road from Amphanggiri to Rongru Asim (MG/05/III/04/01B)

Amount

Dismantling of Structures

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000m as per Technical Specification Clause 202 (II) By Mechanical Means (A) Cement Concrete

Excavation for Structures Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. I. Ordinary soil Upto 3 m depth

Bored cast-in-situ M35 grade R.C.C. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m. (Pile diameter-1000 mm)

Pile load test on single vertical pile in accordance with IS:2911(Part-IV)

Cement concrete for reinforced concrete in pile cap complete as per drawing and Technical Specification D. RCC Grade M35

Levelling course for Pile cap

Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202

Plain / reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 For height upto 5 m IV. R.C.C. grade M 25

Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in substructure complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202

Supplying, fitting and fixing in position true to line and level cast steel rocker bearing conforming to IRC: 83(Pt.-1) section IX and clause 2003 of MoRTH specifications complete including all accessories as per drawing and Technical Specifications.

Supplying, fitting and fixing in position true to line and level forged steel roller bearing conforming to IRC: 83(Pt.-1) section IX and clause 2003 of MoRTH specifications complete including all accessories as per drawing and Technical Specifications.

Providing weep holes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7

Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8 I. Granular material

Furnishing and Placing Reinforced/Prestressed cement concrete in superstructure as per drawing and Technical Specification F. PSC Grade M-45 For I-beam & slab including launching of precast girders by launching truss upto 40 m span, 21-31% of cost of concrete. (p) Height upto 5m

Supplying, fitting, and placing HYSD bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202

Providing and laying cement concrete wearing course M 30 grade including reinforcement complete as per drawing and technical specifications Clauses 800 and 1206.3

Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000 mm as per drawing and technical specifications Clauses 800, 900 and 1208.3

Drainage spouts complete as per drawing and technical specifications Clause 1209

Strip Seal Expansion Joint (Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation.)

Providing and laying pitching on slopes laid over prepared filter media as per drawing and technical specifications Clause 1302 I. Stone/Boulder

Providing and laying filter material underneath pitching in slopes complete as per drawing and technical specifications Clause 1302

Subway & SPT Bridge (25m)

Labour for driving by monkey pile driver (Jarul,nahar or sal) piles includingmarking number in lengths at every 60cm and coaltaring two coats staging,dirric installation ,pulleyes etc complete Portion above ground (handling) Above 250 mm to 300 mm dia

Labour for driving by monkey pile driver (Jarul,nahar or sal) piles includingmarking number in lengths at every 60cm and coaltaring two coats staging,dirric installation ,pulleyes etc complete Portion below ground (as actually driven) Above 250 mm to 300 mm dia

Supply of Salwood round posts of size (average) 30cm dia dressed

Labour for fitting and fixing iron works in R.S.J Beams angles tees,bed plates etc including cutting to sizes and drilling holes ( only R.S.J Channels will be issued free of cost at the site of work by the department etc.)

Cost of RS Joist as per approved rate of Additional CE's Western Zone Tura.

Extra for scarfing and joining piles (Jarul,Nahar or sal) with bolts and nuts,clamps length being clamp 90 cm each joint complete.

Supplying fitting and fixing Ist class Sal wood works (undressed) in superstructure including supplying all fittings such as nails,bolts and nuts spikes,etc and including coal taring two coats complete. etc.

Supplying fitting and fixing pile shoes made of 6 mm thick iron plate and 6 mm thick flat iron to shape

Supplying fitting and fixing Ist class Local wood works (undressed) in superstructure including supplying all fittings such as nails,bolts and nuts spikes,etc and including coal taring two coats complete. etc.

Good and Service Tax (18%)

M/S M.P. AGARWAL PVT LTD (BID ID -607991)

Rofiza Khatun (BID ID -608017)

Daniel N Sangma (BID ID -607772)