ADDN ALTN TO CERTAIN TOILETS IN OTM BUILDINGS AT AF STN JAMMU UNDER GE AF JAMMU

Amount

M& L for Surface Excavation n exc 1.5m wide and n exc 1.5 m deep and getting out in any type of soil.complete all as spd and directed.

M& L for Excavation in trenches n exc 1.5m wide and not exc 1.5m depth , for foundation etc or for shafts ,manholes, etc not exc 10.00sqm on plan and not exc 1.5m depth and getting out in any type of soil.complete all asp and directed.

Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles.complete all as spd and directed. Note : Including removal demolished debris out of defence line and dumped at govt approved dumping area and no extra payment will be made to contractor against the same.

Material and labour Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:4 for manhole etc in same mortar as the work proceeds Complete all as specified.

Demolition of cement concrete in ground floors and paving ( reinforced) n exc. 15 cm. thicknesses, below or above ground level, Complete all as specified and directed by Engr-in-charge. Note : Including removal demolished debris out of defence line and dumped at govt approved dumping area and no extra payment will be made to contractor against the same.

M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs,cover and in shelves etc including formwork complete all as spd and directed by Engr-in-charge.

M&L Mild steel TMT bars 8mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality.complete all as spd and directed by Engr-in-charge.

Demolition of PCC in ground floors & pavings n exc 15 cm thickness but above or below ground floors (unreinforced) complete all as spd and directed by Engr-in-charge. Note : Including removal demolished debris out of defence line and dumped at govt approved dumping area and no extra payment will be made to contractor against the same.

M&L PCC 1:4:8 type D-2 (using 40 mm graded aggregate) in 100mm thickness as in sub base of path all as specified and directed.

Demolition of, stone slabs and tiles of any description or thickness in floors,aprons including screed bed or flooring etc complete all as specified and directed Note : Including removal demolished debris out of defence line and dumped at govt approved dumping area and no extra payment will be made to contractor against the same.

M & L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.18 sq m but not exceeding 0.38 Sq m in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over a screed layer of 15 mm thick in CM 1:4 complete all as specified and as directed.

M&L for pre- polished granite slab machine cut of any shade as approved by GE of 20 mm thick inc over cement screed bed and make suitable hole for cylender gas pipe, kitchen sink ,WHB, edge moulding,Grinding and Machine polishing to edge to give high gloss finish (Granite finish) with suitable grinding stones and set in screed bed 15mm thick CM 1:4 in single piece for platform complete all as 'specified and as directed by Engr-in-charge.

M &L plinth protection of 75mm thick PCC 1:2:4 type B-2 laid to an outward slope of not less than 1:12.Plinth protection shall be cast in panels not exceeding 2.00 SM areas with 6mm wide joints. The joint shall be filed with mastic filling.10mm wide joints between the walls and plinth protection shall be filled with mastic filling.complete all as spd and directed by engr-in-charge Note:-formation and filling of joints shall be paid separetly as per item no 16.

M&L RCC type B-1 (1:2:4) using 20mm graded aggregate in foundations, including rafts footing, foundation beams, plinth beams, lintel beam, bases for columns etc, basement slabs, under-reamed piles and mass concrete etc etc incliding formwork complete all as specified.

Taking down cement plaster,existing wall tile/mosaic in any thickness including racking out joint hacking for key scrubing down with water etc complete all as specified. Add Note : Including removal demolished debris out of defence line and dumped at govt approved dumping area and no extra payment will be made to contractor against the same.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or over roof concrete surfaces mixed with integral water proofing compound finished even & fair without using extra cement complete all as spd and directed by Engr-in-charge. Note : WPC shall be measured & paid seperately.

Supply only integral water proofing compound ISI marked. Complete all as spd and directed by Engr-in-Charge.

All as per item No 18 hereinbefore but 5mm thick in CM 1:3 on ceiling,chajja,roof projection etc.complete all as spd and directed by Engr-in-charge.

M&L Coloured Glazed Ceramic wall tiles iternity premium class having a size 600 x 300mm each incl 10 mm thick joint free with cement mortar 1:4 to match the shade, pattern, laying at site complete all as spd and directed by Engr-in-charge.

Taking up or down steel tubing & connections, including cleaning & S&F CPVC tubing & connections in new or old position (Walls, ceiling, floors, etc.) of 15mm bore including cutting chases for concealed and making good the surface with CM 1:3.complate all asspd and directed by Engr-in-charge.

Taking up or down steel tubing & connections, including cleaning & S&F new CPVC tubing & connections in new or old position (Walls, ceiling, floors, etc.) of 20mm bore complate all asspd and directed by Engr-in-charge.

Dismantling wall and ceiling board (fiber, pulp, PVC, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillets.complete all as spd and directed.

M&L RCC type B-1 (1:2:4) using 20mm graded aggregate in coloumns, pillars, piers, posts and struts etc incliding formwork complete all as specified.

Supply and fixing Hollow PVC Wall Lining consisting of 5 to 6 mm thick colour/ printed PVC sheet including fillets, GI frame work, fittings and fixture with all accessories etc as per approved design, drawing as.complete all as spd and directed by engr-in-charge

S&F in repairs Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests with trap(excluding flushing cistern & flush pipe) complate all as spd and directed by Engr-in-charge.

S & F for viterous china wash down water close (Pedestral pattern) EWC white and mild steels chromium plated or aluminium hinging device and connecting to 'P' trap incl flush pipe 32mm dia connecting with flushing rim all as specified Make:- Cera Cat No S1059104, B1010112, B1510121/ Jaquar Cat Part No CNS-WHT-551PSPP/ Hindware Cat No 518885, 518884 or equivalent in approved makes.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern) 2 in 1 snow white with P trap 110mm,including slim soft close seat cover incl of all accessories.complete all as spd and directed. Make:- (Cera Cat part No -S1013214/ Jaquar QPS-WHT-7753P180UFSPMZ,/ Hindware Cat No -92077 or equivalent in approved makes.

S&F in repair Vitreous china table top wash hand basin, snow white , flat back, size 550 x 450x110 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. Make:- CERA Cat Part No S-2020137,/ Hindware-Cat Part No 91100,/ Jaquar Cat Part No CNS-WHT-905 or equivalent in approved makes..

S&F in repair PVC flushing cistern low level 10 ltr capacity with inlet ball valve, float valve and handle including brackets and flush pipe connecting to WC etc including all fittings and all as specified, including dismantling old flushing cistern any type.complate all asspd and directed by Engr-in-charge. Make:- CERA Cat Part No B-1020106/ Hindware Cat Part No 21029, / Jaquar Cat Part No WHC-WHT-184AN equivalent in approved makes.

S&F in repair heath faucet(ABS Body) mils steel CP sutabile for 15mm dia pipe with 1.25mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed. Make:- Cera Cat Part No. F-8030110AB/ Hindware Cat Part No F-160068,/ Kerovit FA580023-CP equivalent in approved makes..

S&F in repair Vitreous China half stall Urinal, snow white (excluding flushing cistern, flush pipe & waste pipe) complate all asspd and directed by Engr-in-charge. Make:- Carys Cera Cat No S4020104,/ Jaquar URS-WHT-13263,/ Hindware Cat No 96015.

S&F for self closing angle cock pressmatic for urinal with flange and 200mm connected pipe with urinal spreader complete all as specified and directed. Make:- Cera Cat Part No F-8070201,F9020203/ Jaquar Cat Part PRS-077,PRS-CHR-077/ Jainko Cat Part No.BUS-1 equivalent in approved makes.

S&F 12mm thick toughned glass with film as in hinged doors, partitions, automatic doors and similar work including all accessories, cutting to shape, drilling holes as required including fixing with stainless steel cleats, hinges etc for partition and door frames as per ground requirement, complete all as specified and directed by Engr-in-charge.

S&F in repairs brass Choromium plated shower rose with or without swivel joints 125mm size including fixing to steel pipe or union complete. Make;- Carys Cera, Cat No 7020111AB,/ Jaquar Cat No OHS-35495, / Hindware- Cat No F160142).

S&F in repair chromium plated fancy type stop cock/angle valve with crutch or butterfly handle, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed complete, all as specified. Carys Cera, Cat No F2014201,/ Jaquar Cat No OPP-CHR-15053PM,/ Hindware- Cat No F690043CP.

S&F in repairs CP Bib taps 15 mm bore, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule.complate all asspd and directed by Engr-in-charge. Cera cat Part No 2014152, Jaquar- Cat No CON-CHR-107KN, Hindware- Cat No F690003CP equivalent in approved makes..

S & F in repair CP wash basin mixture swan neck type hot and cold screwed downhigh pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipes 15 mm dia. Complete all as specified and as directed. Make:- Cera cat Part No F-1003461/ Hindware Cat Part No F-200014CP,/ Jaquar Cat Part No FLR-CHR-5167NB equivalent in approved makes.

S&F in repair Brass CP wall mixer (3 in1 mixer) for Hot and cold for 15mm bore complete fixed to connection .complete all as spd and direcetd. Make:- Cera cat Part No F-1017403/ Hindware Cat Part No F-330022CP,/ Jaquar Cat Part No COP-273PM equivalent in approved makes.

S & F in repair PVC connection 45 cm long fitted with PTMT nut and washer on both ends, fixed to 15 mm bore iron pipes.complate all asspd and directed by Engr-in-charge.

S&F in repair steel grating doom 125mm dia with waste hole etc complete.complate all asspd and directed by Engr-in-charge.

S & F in repair waste coupling of steel (half or full threaded) 32 mm dia.complate all asspd and directed by Engr-in-charge.

S&F in repair Bottle trap of chromoium plated minimum water seal of 25mm .(Minimum weight 32mm-260gms/40mm-270 gms) 300mm long with 40mm PVC pipe upto the floor trap complete all as specified and directed. Make;-Cera corus cat part no.F8060406,Jagaur ALD-769L 300X190,Karovit KA870002 or equivalent in approved makes.

S&F of soap-dish chromium plated complete all as specified and directed by Engr-in-charge. Make:- Cera Cat Part No F-5006106,/ Jaquar CAN-1131N/ Hindware Cat Part No F-580004CP or equivalent in approved makes.

S&F of Paper holder chromium plated complete all as specified and directed. Make:- Cera Cat Part No F-5013109CH,/ Jaquar CAN-CHR-1153S/ Hindware Cat Part No F-880003CP or equivalent in approved makes.

S&F in repair Towel Rail 60 cm (D type) long of CP fixed with and including Chromium plated brass screws and plastic cleats ( Minimum weight 190 gms) .complete all as spd and directed. Make:- Cera Cat Part No F-5002103,/ Jaquar Cat Part AKP-35711PS,/ Hindware Cat Part No F-880008CP or equivalent in approved makes.

S&F shelf fixed with and including Chromium plated brass screws and cleats ( Minimum weight 300 gms) complete all as specified and directed by Engr in charge. Make:- Cera Cat Part No F-5005103,/ Jaquar Cat Part CAN-CHR-1173 or equivalent in approved makes.

M&L PCC 1:5:10 type E2 using 40mm graded stone as in foundation filling and mass concrete etc. complete all as specified.

M&L Cement concrete bed to 1:3:6 type C-2 to drain pipes including including forming dia of pipe 150 mm etc complete all as specified.

Supply and Fixing of Reinforced concrete pipe class NP-2 laid and jointed complete with coller 150 mm dia complete all as specified.

Returning filling in, including spreading, levelling watering and well ramming in layer not exc 25 cm thick complete all as specified.

Removing debris/soil material (soil) to a distance exc upto 250 m and depositing.complete all as spd and directed by Engineer-in-charge.

Cutting into existing man holes for connecting new drain making good to pipe and rendering for and foeming branch channel ( 1/2 round or 3/4 section ) in cement concrete 1:2;4type B-1 smooth finished branches as required 150 mm dia pipe .

Dismantling unservicable /cracked water tanks and removing from site capacity exe 500 ltr n.exe 1000 ltr complete all as spd and directed by Enr-in-charge. Add Note : Including demolition of existing RCC tank and making of brick pedstal for fixing new PVC water tank and removal demolished debris out of defence line and dumped at govt approved dumping area and no extra payment will be made to contractor against the same.

Supply and fixing white colour Rotational moulded polythene water storage tanks in square shape hoisted and fixed in position all as spd in SSR Part –I of capacity of tanks 1000 ltr capacity (Tripple layer) incl PVC float valve 20mm dia,gate valve for inlet and outlet pipe including GI nipple at inlet and outlet pipe.complete all as spd and directed.

Taking down CI pipes,SWR pipes (incl all fittings),bend , floor traps with spigot and socket ends and lead joints incl burning out joints and removing lead of 100mm dia pipe.complete all as spd and directed.

Taking down CI pipes,SWR pipes (incl all fittings),bend , floor traps with spigot and socket ends and lead joints incl burning out joints and removing lead of 75mm dia pipe.complete all as spd and directed.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints as in trenches or floor bore of pipe 110 mm etc complate all asspd and directed by Engr-in-charge.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complate all asspd and directed by Engr-in-charge.

S&F in PVC (SWR) pipes of size 75mm dia with single socket joints fixed to wall with stack clamp and rubber ring joints.complete all as specified and directed by Engineer-in-Charge

S&F in repair 75mm bore PVC (SWR) bends with assecible door any radius complate all asspd and directed by Engr-in-charge.

S & F in repair PVC (SWR) bends with asseciablr door of any radius with access door bore of pipe 110 mm.complate all asspd and directed by Engr-in-charge.

M&L in repair 75mm bore PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement complate all asspd and directed by Engr-in-charge.

PVC in repair (SWR) vent cowl 75mm complate all asspd and directed by Engr-in-charge.

Taking down chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as spd and as directed. Note:- Including make good the Jam of window/Door to receive new door/window by brick work,plaster and matching finishes as required also no extra payment should be made to the contractor against the same.

Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as spd and directed Note:- Including make good the Jam of window/Door to receive new door/window by brick work,plaster and matching finishes as required also no extra payment should be made to the contractor against the same.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F 4.8mm thick sheet figured glass,pin head type quality along with oil putty all around the glass edges n exc 0.50 Sqm in each pane and fixed to Aluminium framed work , as lovered for ventilator complete all as specified and as directed.

S&F A Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

S&F A Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with 4 Nos of 100mm stainless steel butt hinges, 2 Nos 150mm stainless handle ,200 mm SS tower bolt and 150mm stainless steel door stopper of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 5mm thick Moulded PVC Sheet on the front face & 5mm plain colour PVC sheet on back face, with wood partical board supplying & fixing in frame at site as per specification & drawing complate all as spd and directed by Engr-in-charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, in opening as per specification & drawing complate all as spd and directed by Engr-in-charge.

S&F Aluminum anodized barrel tower bolt of extruded section and fixed complete of Size 200 mm long complete all as specified.

S&F Aluminum Handle cast type anodized of size 150mm complete all as specified.

S&F Butt hinges 100mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21 complate all asspd and directed by Engr-in-charge.

S&F Aluminium anodised sliding door bolts 250mm long, plate type, stove enamelled black, with bright bolt not less than 15mm dia with & including a minimum of 6 bolts & nuts, four on bolt plate & two on staple plate.complate all as spd and directed by Engr-in-charge.

Taking down existing water proofing treatment with tarfelt including cement Plaster / HP tiles/ from roof or wall surfaces such as parapets / RCC fins of any type in any thickness including demolition of RCC tank etc and prepare the surface for new treatment.complete all as specified and directed by Engr-in-charge. Note :-Including Removal of debris or excavated material out of the defence line at govt approved dumping area and no extra cost will paid to the contractor against the same.

M&L for surface preparation & Cleaning the surface and made free of dirt, foregin particles laitance followed by grinding all protrusions to make surface modulated and including cement platering 20mm thick in cment mortar 1:4 incl mixing of liquid water proofing compound as per manufecturer instruction on surfaces of floor etc finished even and smooth without using extra cement and making strips of size 30cm x 30cm .Thereafter, inspection for cracks on the surface caused by thermal expantion contraction. Cutting the grooves with suitable cutter machine in 'V' groove filled with Repair mortar/Mircroconcrete/General purpose grout as recommended propertionaly as per recommendation of manufacturer. Making of Gollas at all the corners with Polymer modified mortar (1:4) Cement :Sand with 3.5% Acylic of Cement weight , Supplying and applying High build waterproofing coating based on pure hydrophobic polyurethane cold applied of spray /brush applied membrane with and elongation of 280% and tensile strength of 2.7 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, hardness (shore A scale) 80, solar reflectance of 84% as per A ASTM E903-96, SRI of 106, capilary absorption of 0.01kg/m2 h0.5 as per EN 1062-3, adhesion must be of ˃ 2.0 N/mm2 as per EN 1542, artificial weathering must be passed as per EN 1062-11 temprature resistance must be in between -300C to +900C, no leakage upto 5 bars of water pressure as per DIN 1048 mm min 88% solid content. The system includes final top coat of high build waterproofing coating based on pure hydrophobic polyurethane white in color application in 2 coats with a total min consumption of 1.5 Kg per SQM in ratio 60% 40% in both coats respectively over a coat of epoxy primer 1:1:2 (Resin:hardner:water) with a min consumption of 0.2 Kg per SQM. Application should be given by company for the product on company letterhead, complete all as specified and directed.

M&L for preparation of new plaster surfaces and applying Finishing walls with Acrylic Smooth exterior paint of required shade with Two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm followed by 3mm wall care putty on wall surfaces.complete all as spd and directed by Engr-in-charge.

M &L preparation of New Surface of ceiling and applying three coat of white wash over a coat of primer so as to provide smooth sufaces.complete all as specified.

Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power)complete including fixture and fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover, including taking down of DB’s, meter board any type all as specified and as directed.

Point wiring for one light point/ fan point controlled by one switch with 1.5 sqmm FRLS PVC insulated unsheathed copper condector single core multi strand flexible cable and 1.5 Sqmm FRLSH PVC insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including concealed non metallic rigid PVC conduit heavy grade with all fittings ( ISI marked ) controlled by one switch including CI/MS sunk box modular required size including suitable sheet cover , including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified and directed.

One light point controlled by one switch.

One wall fan/Exhaust fan/ceiling fan point controlled by one switch.

One 3 pin socket outlet point 5 Amps on independent, with cables 1.5 sq. mm size .

One 3 pin socket outlet point 15 Amps on independent, with cables 2.5 sq. mm size .

S&F for energy saving environmental friendly, LED tubelight fittings 20 watts 1200 mm (Aluminium body) long life, impact proof, surface/wall mounting IP 20, 95 luminaries per watt, extruded aluminium housing with frosted PMPA diffuser high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size with ceiling rose complete all as specified and directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F LED Lamp 230 Volts case body 12 Watts, in white colour with maximum Lumen output (850lm) and colour temp 3000K with base cap B-22, complete all as spcified and as directed.

Taking down carefully existing storage type water heater (Geysers) any description and removing 4 Nos bolts and fastners including PVC washers at both ends, and refixing,the same including making the water supply connections complete all as specified and as directed.

S&F for energy saving environmental friendly, LED bulkhead lights fittings 10 watts long life, impact proof, surface/wall mounting IP 65, extruded aluminium housing with frosted PMPA diffuser high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable complete all as specified and directed.

S & F Socket outlet flush universal modular (piano) type 6 pin 16 Amps with suitable plate and cover complete all as specified and directed.

S&F Socket outlet flush modular (piano) type 5 pin 6 Amps with suitable plate and cover complete all as specified and directed.

S&F Switch Modular (piano) flush button single pole one way 16 amps with suitable plate and cover complete all as specified and directed.

S & F Switch Modular (piano) flush button single pole one way 6 amps 1 module with suitable plate and cover complete all as specified and directed.

S & F ceiling rose surface bakelite 2 to 3 terminals 65 x 50mm complete all as specified and as directed by Engineer-in-Charge.

M & L for sub main wiring with two single core FRLS, PVC insulated, stranded, unsheathed cable copper conductor with size 04 Sqmm and drawing through & including Non metallic PVC conduit concealed in wall including earth continuity conductor of size 04 Sqmm PVC insulated unsheathed stranded copper conductor cable and connected to earth dolly to be drawn in ccocealed PVC conduit including connecting to main board complete all as specified and directed by Engineer-in-Charge. Note:- Conduit will be measured and paid separately.

Supply and fixing exhaust fan, PVC body AC single Phase. 230V of size 250mm sweep with, blades, and frame and louvers with bird guard to protect the fan in running condition, including outside louvers with proper hole and necessary fixing arrangement good to disturbed surface complete all as specified and as directed.

S & F MCB Distribution board, double door type Single pole & neutral 240 Volt, 8 way, type With 200 Amps bus bar complete all as specified and directed.

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with connecting GI pipe suitable length, nut bolt and all connecting on wall complete with IP 65/66 protection complete all as specified and directed by Engineer-in-Charge.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm size of 2 core cable nominal cross section in service connections

S&F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

SP 5 To 32 AMP

SPN 32 AMP

Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLSH is PVC insulated copper conductor, single core cable in surface/ recessed as required 2X6Sqmm copper conductor with 4 Sqmm earth wire lead PVC insulated unsheathed stranded copper conductor cable and connected to earth dolly to be drawn in concealed PVC conduit including connecting to main board complete all as specified and directed by Engineer-in-Charge.

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed.

M & L for industrial type metal socket enclosure with 240 volt MCB 32 Amps, with metal plug top complete all as specified incl taking down old unserviceable one.

SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.

ANIKET TRADERS (BID ID -3485722)

CCC (CHOUDHARY CONSTRUCTION COMPANY) (BID ID -3485780)

M/S Shesh Paul Gupta (BID ID -3485812)