Nandgaon Municipal Council water supply scheme and electric pump and other electrical works on the scheme to carry out various maintenance and repair works of Nandgaon Municipal Council

Amount

Supplying and replacing MNX three pole power contactors for motor starter: MNX 9

Supplying and replacing MNX three pole power contactors for motor starter: MNX 12

Supplying and replacing MNX three pole power contactors for motor starter: MNX 18

Supplying and replacing MNX three pole power contactors for motor starter: MNX 25

Supplying and replacing MNX three pole power contactors for motor starter: MNX 40

Supplying and replacing MNX three pole power contactors for motor starter: MNX 140

Supplying, erecting & marking MCB: 25 AMP 415 Volt mark

Supplying, erecting & marking MCB:32 AMP 415 Volt ISI mark

Supplying, erecting & marking MCB:40 AMP 415 Volt Isl mark

Supplying, erecting & marking MCB:63 AMP 415 Volt ISI mark

Supplying and erecting electrical control panel components: -INDICATOR R, Y, B MAKE- TECNIC, 22.5 mm

Supplying and erecting electrical control panel components: - VOLT METR, range 0 - 500 volts, 96x96

Supplying and erecting electrical control panel components: -CT OPERATED AMMETER, range 0 - 200 amp., 96x96

Supplying and erecting electrical control panel components: -ROTARY SWITCH RYB AMP./VOLTMETER

Supplying and erecting electrical control panel components:- C- channel

Supplying and replacing No-Volt-Coil for motor: Upto 15 HP

Supplying and replacing No-Volt-Coil for motor: Upto 30 HP

Supplying and replacing No-Volt-Coil for motor: Upto 90 HP

Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V aluminium conductor complete erected with lugs, on wall/ trusses/pole or laid in provided trench/ pipe: 2CX10 SQMM

Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V aluminium conductor complete erected with lugs, on wall/ trusses/pole or laid in provided trench/ pipe: 4CX10 SQMM

Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V aluminium conductor complete erected with lugs, on wall/ trusses/pole or laid in provided trench/ pipe: 4CX16 SQMM

Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V aluminium conductor complete erected with lugs, on wall/ trusses/pole or laid in provided trench/ pipe: 4CX25 SQMM

Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V aluminium conductor complete erected with lugs, on wall/ trusses/pole or laid in provided trench/ pipe: 4CX35 SQMM

Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V aluminium conductor complete erected with lugs, on wall/ trusses/pole or laid in provided trench/ pipe: 4CX50 SQMM

Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V aluminium conductor complete erected with lugs, on wall/ trusses/pole or laid in provided trench/ pipe: 3.5CX70 SQMM

Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V aluminium conductor complete erected with lugs, on wall/ trusses/pole or laid in provided trench/ pipe: 3.5CX95 SQMM

Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V aluminium conductor complete erected with lugs, on wall/ trusses/pole or laid in provided trench/ pipe: 3.5CX120 SQMM

Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe: 1CX25 SQMM

Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe: 1CX35 SQMM

Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe: 1CX50SQMM

Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe: 2CX2.5 SQMM

Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe: 2CX4 SQMM

Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe:2CX6 SQMM

Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe: 2CX10 SQMM

Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe: 3CX2.5 SQMM

Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe: 3CX4 SQMM

Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe - 3CX6 SQMM

Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe -3CX10 SQMM

Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable with necessary material: - 2.5 to 16 sq.

Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable with necessary material: - 25 to 50 sq.

Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable with necessary material: - 70 to 95 sq.

Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable with necessary material: - 120 to 185 sq. mm.

Supplying & erecting crimping type copper lugs for cable complete: Upto 50 sqmm

Supplying & erecting crimping type copper lugs for cable complete: Upto 70-120 sqmm

Fault detection and repairing of MCC panel and ATS panel as per site requirement (labour part only)

Supply of transfomer oil

Overhauling of 100 KVA transformer

Supplying and erecting 11 kV outdoor type gang operated air break, triple pole switch 200 A capacity with 3 post pin type insulator per phase, mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of "C" class G.l. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp.

Supplying and erecting 11 kV outdoor type gang operated air break, triple pole switch 400 A capacity with 3 post pin type insulator per phase, mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of "C" class G.l. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp.

Supplying and erecting, 11 kV outdoor type drop out fuse with insulator complete with fuse holders, fuse barrel with metal fitting, fuse element mounted on M.S. channel with working current of 15A capacity complete erected on provided cross arm.

Supplying and erecting 11 kV fuse barrel with metal fittings complete.

Supplying and erecting hard drawn copper solid wire no. 0 to 6 SWG complete erected for connections on H.T. sides.

Supplying and erecting extra thick alkathene pipe 10 mm dia. erected to enclose bare conductor wires complete.. (use shall be restricted to H.T.)

Supplying heavy duty operating rod, outer dia 25 mm & inner dia 20 mm suitable for 11 kV with brass couplings etc. for removing drop out fuses at 6 meters length, 4 pieces each with rain shade with hand grip including earthling chain 1.5m complete.

Supplying and erecting copper tubular bus 20 mm dia 1.6 mm (16 SWG) thick for the use of high tension over head bus and erected on provided HT insulators with clamps, nuts and bolts complete. (weight per meter of bus is about 1.7 kg.)

Supplying and erecting clamps, made out of 25x3 mm, copper strips to be fixed to tubular bus for connecting the bare copper wire to other equipment, with brass nuts bolts of suitable dia complete.

Supplying and erecting anti climbing devices, fabricated from pole clamps of MS flat 40x5 mm, with drooping spikes 15 cm. in length, welded to it and erected on pole complete.

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class B insulation conforming to IS: 15652 – 2006 having 2.5 mm thickness up to 11 kV

Supplying , erecting Indoor LED Fittings: Supplying and erecting CRCA powder coated corridor/passage light LED fitting (4 feet) Max. 17W

Supplying , erecting Outdoor LED Fittings: Supplying and erecting integrated LED flood light fitting Max. 100W

Supplying , erecting Outdoor LED Fittings: Supplying and erecting integrated LED flood light fitting Max. 195W

Supplying , erecting point wiring and MCBDBs: Point wiring for independent plug in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories as per specification No: WG-PW/SW

Supplying , erecting point wiring and MCBDBs: Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/ flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type)

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 120 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Excavating hard Rock or bituminous road by chiselling for preparing pit for pole / stay/earth plate / for laying cable/ pipe & clearing the site by removing debris & making the site as required complete.

Excavating hard murum / stone metal road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete.

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results

Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results

Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results

Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground Enhancing compound complete with all materials, testing & recording the results

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required.

Supplying and erecting mains with WP 2 x 6 sq. mm. 1100 V. grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire.

Supplying and erecting mains with WP 2 x 4 sq. mm. 1100 V grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire.

Point wiring in for light/fan/bell in 20 mm metal conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories

Supply of Following spares for above pumpset: Motor Cooling Fan

Supply of Following spares for above pumpset: Rotter Balancing

Supply of Following spares for above pumpset: Best Quality grease AP 3

Supply of Following spares for above pumpset: Bearing Cap

Supply of Following spares for above pumpset: Motor Top bearing

Supply of Following spares for above pumpset: Motor Bottom bearing

Supply of Following spares for above pumpset: Motor top and bottom Shaft Welding Turning

Supply of Following spares for above pumpset: Oil Seal

Supply of Following spares for above pumpset: Bearing check - nut

Supply of Following spares for above pumpset: Motor housing Cover Top

Supply of Following spares for above pumpset: Motor housing Cover Bottom

Supply of Following spares for above pumpset: Motor connection plate

Supply of Following spares for above pumpset: Motor connection lugs

Supply of Following spares for above pumpset: Pump Shaft Sleeve S/S

Supply of Following spares for above pumpset: Pump Shaft S/S (New)

Supply of Following spares for above pumpset: Pump Shaft Balance

Supply of Following spares for above pumpset: Pump Impeller

Supply of Following spares for above pumpset: Impeller Neck Ring

Supply of Following spares for above pumpset: Impeller Balance

Supply of Following spares for above pumpset: Impeller diffuser

Supply of Following spares for above pumpset: Oil seal & Mechanical Seal

Supply of Following spares for above pumpset: Coupling Bush

Supply of 5 HP Three Phase Monoblock Pump (New)

Supply of Following spares for above pumpset - Motor Cooling Fan

Rotter Balancing

Best Quality grease AP 3

Bearing Cap

Motor Top bearing

Motor Bottom bearing

Motor top and bottom Shaft Welding Turning

Oil Seal

Bearing check - nut

Motor housing Cover Top

Motor housing Cover Bottom

Motor connection plate

Motor connection lugs

Pump Shaft Sleeve S/S

Pump Shaft S/S (New)

Pump Shaft Balance

Pump Impeller

Impeller Neck Ring

Impeller Balance

Impeller diffuser

Oil seal & Mechanical Seal

Coupling Bush

Supply of 10 HP Three Phase Monoblock Pump (New)

Repairing work for 30 HP Centrifugal Motor Pump set: Supply of spares for pumpset Item No 122 to 144 : Motor Cooling Fan

Rotter Balancing

Best Quality grease AP 3

Bearing Cap

Motor Top bearing

Motor Bottom bearing

Motor top and bottom Shaft Welding Turning

Oil Seal

Bearing check - nut

Motor housing Cover Top

Motor housing Cover Bottom

Motor connection plate

Motor connection lugs

Pump Shaft Sleeve S/S

Pump Shaft S/S (New)

Pump Shaft Balance

Pump Impeller

Impeller Neck Ring

Impeller Balance

Impeller diffuser

Oil seal & Mechanical Seal

Coupling Bush

Supply of 30 HP Three Phase Monoblock Pump (New)

Supplying & erecting DOL starter: 7.5 H.P.

Supplying & erecting Star Delta Starter: 20 H.P.

Supplying & erecting Star Delta Starter: 15 H.P

Supplying & erecting HRC fuse cartridge 415V: 60 Amp

Supplying & erecting HRC fuse cartridge 415V: 80 Amp

Supplying & erecting HRC fuse cartridge 415V: 100 Amp

Supplying & erecting HRC fuse cartridge 415V: 125 Amp

Supplying & erecting HRC fuse cartridge 415V: 150 Amp

Supplying & erecting HRC fuse cartridge 415V: 200 Amp

Supplying & replacing timer for STAR/DELTA motor starter: GIC Stardelta Timer

Supplying & replacing timer for STAR/DELTA motor starter: GIC Timer SM-301

Supplying & replacing timer for STAR/DELTA motor starter: Time Switch Timer

Supplying and replacing thermal over load relay for motor starter: Relay Range 4 to 6 Amp

Relay Range 9 to 14 Amp

Relay Range 13 to 21 Amp

Relay Range 45 to 75 Amp

Supplying and replacing thermal over load relay for motor starter: 25 AMP 415 Volt mark

Supplying and replacing thermal over load relay for motor starter: 32 AMP 415 Volt ISI mark

Supplying and replacing thermal over load relay for motor starter: 40 AMP 415 Volt ISI mark

Supplying and replacing thermal over load relay for motor starter: 63 AMP 415 Volt ISI mark

Supplying and replacing thermal over load relay for motor starter: 125 AMP 415 Volt ISI mark

Supplying and replacing thermal over load relay for motor starter: 200 AMP 415 Volt ISI mark

Repairing of motor starter (Rate quoted per HP of pump)

Dismantling and erection of 1 HP and 10 HP submersible motor and transportation from site to workshop and return etc. complete

Complete rewinding of motor with quality copper wire 'F' class insulation and skilled labour charges etc.

Rotor balancing

Motor bush top

Motor bush bottom

Thrust plate top and bottom

Pump shaft sleeve S.S.

Pump shaft S.S

Pump shaft balance

Pump impeller

Impeller neck ring

Impeller balance

Impeller diffuser

Oil seal and mechanical seal

Coupling bush

N.R.V. rubber

O ring

Nut bolts

Pump bush

25 sqmm. cable

Waterproof joint kit

Supply of 1 HP Borewell Submersible Pump (New)

Supply of 5 HP Borewell Submersible Pump (New)

Supply of 10 HP Borewell Submersible Pump (New)

Repairing work for 60 HP submersible motor and pump Item No 193 to 214 Dismantling and erection of 60 HP submersible motor and transportation from site to workshop and return etc. complete

Complete rewinding of motor with quality copper wire 'F' class insulation and skilled labour charges etc.

Rotor balancing

Motor bush top

Motor bush bottom

Thrust plate top and bottom

Pump shaft sleeve S.S.

Pump shaft S.S

Pump shaft balance

Pump impeller

Impeller neck ring

Impeller balance

Impeller diffuser

Oil seal and mechanical seal

Coupling bush

N.R.V. rubber

O ring

Nut bolts

Pump bush

25 sqmm. cable

Waterproof joint kit

Supply of 60 HP Borewell Submersible Pump (New)

Technova Infrastructure Private Limited

M/s. Laxmi Electricals