SPECIAL REPAIR TO BUILDING NO P-325 AND P-326 AT CME

Amount

Demolition of cement Concrete in flooring and pavings n.exc15cm thick (below or above ground level) including removal of debries up to 100M complete all as specified and directed

M & L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) in sub base of floors 75mm thick all as specified and directed including demolition of old concrete complete as specified and directed by Engr-in-Charge.

M & L for cement concrete PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) 25 mm thick, as in subbase, finished even and fair complete as specified and directed.

M & L non skid ceramic colour tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

M & L for coloured glazed ceramic tiles 375mmx250mm x7mm/450mmx300mmx7mm thick & boarder in vertical surfaces such as skirting, dado etc set & jointed in neat cement slurry & pointed in coloured cement to match fixed over including backing coat 15 mm thick in CM (1:4) all as specified and directed Including dismantling old tiles complete as specified and directed by Engr-in-Charge.

M & L for coloured vetrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including bedding layer 15mm thick as in floor in cement mortar (1:6) complete all as specified and as directed.

M & L for machine cut and machine polished kota stone slab as in flooring 20-25 mm thick laid over and including 15mm thick (average thickness) cement screed in CM (1:6) base, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl cutting, waste, rubbing and polishing etc complete all as specified and directed.

M & L for machine cut kota stone slab as in skirting 20-25mm thick in riser of steps, skirting, dado and pillar over and including15mm thick (avg thickness) rendering in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl cutting, waste, rubbing and polishing etc complete all as specified and directed.

M & L for 18-20mm thick granite machine cut and mirror polished (of any type) in steps, jambs, pillers, window cills, kitchen platform bedded over and including cement mortar sceed bed 15mm thick (1:6) and jointed in grey cement with mixture of pigment to match the shade of granite stone including grinding and rounding the edges etc complete all as specified and directed.

S & F 15 mm bore bib tap, brass chromium plated with wall flange, fancy type with long shank and crutch handle, screwed down, screwed for iron pipe including taking down old u/s one complete all as specified. Make : Jaquar CONTINENTAL SERIES CAT No CON-047KN or equivalent model in Marc/ ESS-ESS as approved by GE.

S & F 15 mm bore angle cock, with capstan head, brass chromium plated fancy type, screwed down high pressure, with wall flange, long shanks and flynuts, screwed for iron pipe including taking down old u/s one complete all as specified and directed. Make- Jaquar CONTINENTAL SERIES Code No CON-059KN or equivalent model in Marc/ ESS-ESS as approved by GE.

S & F brass CP health faucet for EWC 15 mm bore, including one metre length PVC barbed flexible pipe with steel casing and hook fixed to wall etc including taking down old u/s one complete all as specified and directed by Engineer-in-charge. Make : Jaquar CAT No ALD-563 or equivalent model in Marc/ ESS-ESS as approved by GE.

S & F stainless steel soap dish holder complete fixed to wall including taking down old u/s one complete all as specified and directed by Engineer-in-charge. Make- Jaquar CONTINENTAL SERIES Cat No ACN-1131N or equivalent approved make indicated in list of makes in tender.

S & F brass CP toilet paper holder with flap fixed to wall with chromium plated brass screws including taking down old u/s one complete all as specified and directed by Engineer-in-charge. Make : Jaquar CONTINENTAL SERIES CAT No ACN-1151N or equivalent model in Marc/ ESS-ESS as approved by GE.

S & F glass shelf of 12 mm thick 600 mm long, fancy type with all accessories complete all as specified and directed. Make Jaguar/ Hindware or equivalent as approved by GE. Make : Jaquar CAT No ACN-1153N or equivalent model in Marc/ ESS-ESS as approved by GE.

S & F brass chromium plated single towel rail, 60 cm long between flanges including taking down old u/s one complete all as specified and directed by Engineer-in-charge. Make : Jaquar CONTINENTAL SERIES CAT No ACN-1111BNM or equivalent approved make indicated in list of makes in tender.

S & F brass chromium plated single towel ring including taking down old u/s one complete all as specified and directed by Engineer-in-charge. Make : Jaquar CONTINENTAL SERIES CAT No ACN-1121BN or equivalent approved make indicated in list of makes in tender.

S&F Viterious china wash hung basin with full pedestal size 610x480x195, Make-Jaguar code-FNS-WHT-4081+FNS-WHT-40301 white excluding taps, waste chain and plug and porcelain stopper but including cast iron brackets , CP waste coupling 32mm full thread with 80 mm height ALD-705,code-B/BA/WC/JAQ/C/0006, make-Jagur and bottle trap Make-Jagur code-164071N-CP, or equivalent approved make as indicated in lit of make of tender including taking down old u/s one complete all as specified and directed

M&L for coupled closet (Clover) snow white, size-360x640x685mm, make Jagur including P or S trap along with cistern dual flush complete set with soft close plastic seat cover complete as specified and directed including taking down old wash down water closed pan of any description any size Make- Jagur, code SLS-WHT-6851P180PP or equivalent approved make by GE

S & F in repairs brackets powder coated of approved decorative type suitable for fixing curtain rods of 19/20mm dia pipe incl fixing screws, drilling etc as per sample approved by Engr-in-charge all as specified and as directed.

S & F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Demolition of brick work or stone / boulder masonery built in cement mortar complete all as specified including coping complete all as specified and directed by Engineer-in Charge.

M & L walling random rubble (using granite or trap stone) uncoursed, well bonded, bedded and solidly hearted built in CM (1:4) complete all as specified and directed

S &F fancy latch lock(Commercial door knob 2-3/4”standard bracket-satin chrome class room Gd-2) for door with all accessories including taking down old u/s one complete all as specified and directed. Make –BHMA (Kenaurd KCDK01-SS-CL) or equivalent approved make as indicated in lit of make of tender

S & F central hole basin mixer with popup waste system with 450 mm with all connecting accessories including taking down old u/s one complete all as specified, Make-Jagur, Code CON-CHR-167KNB or equivalent approved make as indicated in lit of make of tender

S & F wall mixer with provision for hand shower arrangement with connection legs wall flanges and wall bracket for hand shower including taking down old u/s one complete all as specified, Make-CON-CHR-267KN & HSH-CHR-1937 or equivalent approved make as indicated in lit of make of tender

S & F ISI marked loft water storage tank moulded polyethylene of capacity 750 Ltr hoisted and fixed in position including dismantling of existing PVC tank complete all as specified and directed.

S & F 15 mm bore bib tap, 2 in 1, brass chromium plated with wall flange, fancy type with long shank and crutch handle, screwed down, screwed for iron pipe including taking down old u/s one complete all as specified. Make : Hindware (Cat No : F200004FT) or equivalent approved make indicated in list of makes in tender.

S & F single flow, imported, overhead shower, brass chromium plated, screwed down, screwed for iron pipe including taking down old u/s one complete all as specified. Make : Hindware Cat 160004 or equivalent approved make indicated in list of makes in tender.

S & F fancy type aluminium curtain rod powder coated 20mm dia (of approved colour and design) including taking down old u/s one complete all as specified and directed.

S & F cast iron floor trap, dia of outlet 75mm with cp grating including jointing to waste pipe in run lead, fixed in cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) including taking down old u/s one complete all as specified and directed.

Dismantling CI/AC/PVC (SWR) pipes of any description fixed to wall/laid in trenches including making good disturbed portion of wall floor etc. complete all as specified and directed.

Supply and fix PVC (SWR) pipe 110mm bore single socketed with rubber ring joints/ adhesive fixed to walls with PVC clamps / laid in trenches or in floors including taking down old u/s one complete all as specified and directed.

Supply and fix 110mm bore PVC (SWR) bend with access door any radius complete including taking down old u/s one complete all as specified and directed.

Supply and fix 110mm bore PVC (SWR) junction single (single Y) with access door equal or unequal complete including taking down old u/s one complete all as specified and directed.

Supply and fix 110mm bore PVC (SWR) junction single (single T) with access door equal or unequal complete including taking down old u/s one complete all as specified and directed.

Supply and fix PVC (SWR) pipe 75mm bore single socketed with rubber ring joints/ adhesive fixed to walls with PVC clamps / laid in trenches or in floors including taking down old u/s one complete all as specified and directed.

Supply and fix 75mm bore PVC (SWR) bend with access door any radius complete including taking down old u/s one complete all as specified and directed.

Supply and fix 75mm bore PVC (SWR) junction single (single Y) with access door equal or unequal complete including taking down old u/s one complete all as specified and directed.

Supply and fix 75mm bore PVC (SWR) junction single (single T) with access door equal or unequal complete including taking down old u/s one complete all as specified and directed.

S & F 15mm bore steel water tubing medium grade galvanized with and including all fittings such as bend, tees, union etc and fixed complete to walls and ceilings or laid in floors including taking down existing u/s pipe complete all as specified and directed.

S & F 20mm bore steel water tubing medium grade galvanized with and including all fittings such as bend, tees, union etc and fixed complete to walls and ceilings or laid in floors including taking down existing u/s pipe complete all as specified and directed.

S & F bathroom cabinet mirror of hard thermosetting plastic of size 400x500mm, fitted with superior quality, distortion free 4mm thick mirror including taking down existing u/s pipe complete all as specified and directed.

M & L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20 cm girth complete all as specified and directed complete as specified and directed by Engr-in-Charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation boards/slabs/blankets, any thickness, including cover fillets complete and removing rubbish off the premises complete all as specified and directed.

M & L for false ceiling with 4mm thick designer 'E' board fixed on GI grid work with powder coated finish on exposed surface of size 0.6 x 0.6m consisting of GI angle supported on wall of size 24mm x 28 x 0.7mm main tee of size 24mm x38mm x 0.7mm cross tee of size 24mm x 28mm x 0.7 mm using porpose made members interlocking to each other and with 40mm x 3mm flat GI mild steel strip suspender made to shape at 1200mm c/c fixed with 3mm dia GI wire and making holes etc all as directed including two coats of white wash on ceiling after preparation of surfaces and as per manufacture instruction. Make of GI Grid work : Armstrong/Swastik/Techno Grid and ,E board : Gypsum or equivalent approved .

Raking out joints /pointing to random rubble or polygonal rubble uncoursed or brought upto courses built in cement mortar complete all as specifed and directed.

M & L for raised pointing to random or polygonal rubble, uncoursed or brought upto courses in CM (1:4) complete all as specified and directed.

M & L for 15mm thick cement plastering on stone masonry surfaces in CM (1:6) finishing surfaces even and fair without using extra cement over and including 10mm thick dubbing out on irregular face of wall in CM (1:4) including taking down plastering of any description complete all as specified and idrected.

M & L for 5mm thick rendering in CM (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and as directed.

M & L for 15mm thick cement plastering on stone masonry surfaces in CM (1:4) finishing surfaces even and fair without using extra cement over and including 10mm thick dubbing out on irregular face of wall in CM (1:4) including taking down existing plastering of any description complete all as specified.

M & L for preparation for new or previously untreated plastered surface of walls and applying two coats of acrylic (antifungal) exterior grade paint over one coat of primer complete all as specified and directed

M & L for painting one coat of synthetic enamel paint on steel surface including preparation of old surface of any description, over 10 cm width or girth not otherwise described all as specified and directed by Engineer-in-Charge.

M & L for painting two coats of synthetic enamel paint on wood/ wood based surface including preparation of old surface of any description, over 10 cm width or girth not otherwise described all as specified and directed by Engineer-in-Charge.

M & L for applying two coats of oil bound distemper over a coat of primer includung preparation of newly plastered or unplastered surfaces on walls complete all as specified and directed.

M & L for preparation of newly plastered surfaces and applying two coats of white wash on ceiling all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frames) n.exc 1.5 sqm and removing from site complete all as sepcifed and directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frames) exc 1.5 sqmbut n.exc 4 sqm each and removing from site complete all as sepcifed and directed.

Taking down shutters of any description exc 2 Sqm each complete all as specified and directed

S & F 2nd class hard wood plain solid straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamferred,put together with glue pinned at joints complete all as specified and directed

S & F factory made plain framed panelled shutters 35mm thick of 2nd class hard wood (any number of panels) with panels of timber flat on both sides feather edges or panel of 9mm BWP commercial ply over 12mm thick veneered panticle board with commercial face veneers fixed to chowkhat, size of rail and stile as per IS:1003 (Part-1), kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F 30mm thick flush shutter, solid core construction, with block board core and both face covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

S & F 2nd class hard wood 35 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze,etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as specified in SSR Part-1, Section 8, clause 8.24 (a) complete all as specified and directed.

M & L for mild steel works as in bands straps, hold fasts etc, conforming to IS-2062-2006 (Fe-290), embedded portion duly painted with bituminious paint and sanded, complete all as specified and directed.

M & L for cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in copings, bed plates, fixing of hold fasts and other similar works and the like incl weathering, slightly rounded or chamfered angles and throating as directed including use and waste of necessary form work complete all as all as specified and directed.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet and edges painted to match with printed sheet reinforced with MS square tube complete all as per specification & drawing in SSR Part II 2010 and as per manufacture’s instructions complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement suppling and fixing in the frame at site as per specification & drawings given in SSR Part II 2010 complete all as specified and as directed.

M & L for applying two coats of synthetic enamel paint (First quality) over a coat of pink primer including preparation of new wood and wood based surfaces of any description, over 10cm width or girth and complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M & L for framed work such as grills or grating etc with ends of bars shouldered as framed guard bars conforming to Fe-410-0 or 310-0 all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel and iron surfaces of any descriptions, over 10cm in width or girth complete all as specified and as directed.

S & F mild steel butt hinges, medium weight, cold rolled, 100mm, ISI marked, complete all as specified and as directed.

S & F 150 mm long aluminium anodised handles, ISI marked of extruded section complete all as specified and directed.

S & F ISI marked, aluminium anodised barrel tower bolts, of size 200 mm complete all as specified and directed.

S & F 300mm long aluninium alloy, anodised , ISI marked, sliding door bolt with hasp, staple,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S & F stainless steel wire cloth, 0.36mm nominal dia wire and average width of aperture 1.40 mm and fixed with tinned tacks of mild steel wire stapes, etc, complete all as specified and as directed.

S & F Mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate including taking down old u/s one complete all as specified and directed.

S & F 150mm dia double legged door stopper of aluminium alloy with rubber including taking down old u/s one complete all as specified and directed.

Dismantling boarding, any description in any position with nails and removal to store complete all as specified and directed.

M & L 2nd class hardwood, clean sawn weather boarding, plain, 20mm thick or feather edged 15mm to 20mm thick and fixed with 30mm laps complete all as specified and directed.

M&L for preparing new surface of wood of any decription, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all, as specified and directed.

M & L for 18/19mm thick pre-laminated board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame including taking down existing board of any description complete all as specified and directed.

M & L cover fillet (lipping) of tempered hard board 40mm wide, 6mm thick and fixing with screw complete all as specified and directed.

S & F continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps (when open) 30mm including taking down old u/s one complete all as specified and directed.

S & F 40mm dia cupboard knobs fixed mild steel bright finished with nut, screws and washers of mild steel bright finish including taking down old u/s one complete all as specified and directed.

S & F 150mm hasp and staple, mild steel, wire type stove enamelled black, including bolt to hinge plate and fixed with screw including taking down old u/s one complete all as specified and directed.

S & F stainless steel sink, made out of 1.00 mm thick sheet for kitched with plug, washer pipe cast iron cantilever brackets, connecting union overall size 495x420mm bowl size 410mm x 330mm x160mm complete including taking down old u/s one complete all as specified and directed.

S & F stainless steel kitchen plate rack of size 0.87x1.18m x 0.20 m fixed in repairs complete including taking down old u/s one complete all as specified and directed.

S & F 1.25mm thick steel rolling shutters, without ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in positions indicated complete push pull or manual type including locking arrangement (Safety lever locks mild steel with 4 levers for rolling shutters), two coats of synthetic enamelled paint over a coat of red oxide including taking down old rolling shutter of any description and size complete all as specified and directed.

M & L for precast concete cover slab of 600 mm x 450 mm for man holes with provision of collar all around to house the cover slab and collar fixed to wall of manhole in (1:6) cement mortar having smooth surface finish complete all as specified and directed

Supply and fix 12 mm thick toughened glass railing, minimum height 913 mm for staircase with stainless steel (Mat SS-304) Baluster of dia 50mm (minimum thickness 1.5mm), hand rails, bottom rail of dia 38mm (minimum thickness 1.54mm) all as per manufacturer instructions and as approved by GE

M & L for complete scraping down of old decorative surface of walls with mecanical tool and steel wire brushes of smoke spots, moulds, moss efflorecent salts including filling of spots with POP/Birla putty and making smooth surfaces and applying two coats of oil bound distemper over a coat of primer with pressure pump & Mechanical Machine all as specified and directed

M & L for complete removal of existing treatment with Mechanical tools from walls, filling the holes/cavities and platering the surface required, cleaning and preparation of the surfaces and applying two coats of exterior grade acrylic emulsion paint (Apex) over a coat of primers with pressure pump & mechanical machine as per manufacturers instruction complete all specified and directed.

S & F three track sliding window with two or more shutter with 4 mm thick plane glass or Toughen glass, one shutter of stainless steel mosquito proofing with good quality bearing, handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make including taking down existing old window with frame of any description complete all as specified and directed by Engr-in-Charge. (a) Bottom frame 20620 (b) Top frame & vertical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & bottom 20844

S&F aluminium anodised louvered ventilator with 4 mm thick pin headed glass and 100 mm wide glass strips, white framed and fixed with aluminium anodised frames etc including taking down existing old ventilator with frame of any description complete all as specified and directed. (a) SP 20048 (b) Glazing clips 19352

Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendents regulators, sockets etc revoming materials to store for seperately) and making good disturbed surface of walls, floors etc complete all as specified and directed.

Taking down ceiling fans any type/sweep 230 V AC and refixing after cleaning and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

M & L for point wiring for light/fan/bell with FRLSH cable 1.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and including PVC casing/caping with all accessories and 1.5 sqmm green in colour PVC multistranded, copper conductor FRLSH cable for earth continuity connected to common earth dolly including MS sunken box/PVC box, surface/ flush type and modular white cover plate with frame complete all as specified and directed & making good to disturbed surface of wall etc complete all as specified and directed for the following:-

(a) One light/fan point controlled by one switch and regulator

(b) Socket outlet, three pin 5 Amps on the same board

(c) Socket outlet 5 pin 5 amps on independent board

M & L for point wiring for light/fan/bell with FRLSH cable 2.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and including PVC casing/caping with all accessories and 2.5 sqmm green in colour PVC multistranded, copper conductor FRLSH cable for earth continuity connected to common earth dolly including MS sunken box/PVC box, surface/ flush type and modular white cover plate with frame complete all as specified and directed for 6 pin 15 amps socket outlet flush type on independent board controlled by one switch & making good to disturbed surface of wall etc complete all as specified and directed.

S & F Modular switch, 1 way 6 amps, 1 module complete all as specified and directed.

S & F Modular socket 6A 2/3 pin combined 2 module complete all as specified and directed.

S & F ceiling rose on PVC square blocks, 3 phase PVC/polycarbonate isolated body complete all as specified and directed.

S & F angle/batten lamp holder on PVC square blocks, PVC/polycarbonate type with back plate suitable for batten fitting complete all as specified and directed.

S & F modular fan regulator electronic rotary stepped increase type 2 module 120W complete all as specified and directed.

S & F modular sockets 6A/16A, 2/3 pin combined 2 module complete all as specified and directed.

S & F modualr switches 2 way 16 amp, 1 module complete all as specified and directed.

Supply and fixing on two PVC square blocks surface and wall mounted LED batten 20 watt (LED tube light fitting) of Havells cat part No ENDURALINEARNEOBS20WLED840SPCWH or other equivalent approved make, extruded aluminium housing provided for efficeint heat dissipation wth plycarbonate diffuser & integrated electronic driver incl taking down old UNSV one all as specified and directed.

Supply and fixing on two PVC square blocks surface and wall mounted LED batten 20 watt (LED tube light fitting) of Havells cat part No ENDURALINEARNEOBS10WLED830SPCWH or other equivalent approved make, extruded aluminium housing provided for efficeint heat dissipation wth plycarbonate diffuser & integrated electronic driver incl taking down old UNSV one all as specified and directed.

Supply and fixing decorative wall light fixture made up of polycarbonate suitable for 9 watt retrofit LED Lamp B22 base Havells cat part No ENDURALINEARNEOBS10WLED830SPCWH or other equivalent approved make incl taking down old UNSV one all as specified and directed.

S&F environmental friendly ultra modern energy saving surface mounted decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs 10W Havells ENDURA RUGBY NEO N - IP65 cat part No RUGBYNEONFT10WLED860SSYMTOPC or other equivalent approved make incl taking down old UNSV one all as specified and directed.

S & F building security light luminaire LED type fitting 45Watt pressure die cast housing with individual LEDs suitable for 230 volts 50 Hz single phase AC supply IP 65 protection Havells cat part No ENDURAPEARLNEOSL45WLED757SASYTOPC or other equivalent approved make including suitable size GI bracket, medium grade not less than 1m in length bent to shape and fixing on wall with MS clamps and brackets incl taking down old unserviceable light fitting of any type.

S & F in replacement by flushing to walls MCB distribution board SPN 240 volts 8 way double door with 200 amps rated bus bar and making good to disturbed surfaces of floors walls etc complete all as specified and directed.

S & F in replacement by flushing to walls MCB distribution board SPN 240 volts 4 way double door with 200 amps rated bus bar and making good to disturbed surfaces of floors walls etc complete all as specified and directed.

S & F in replacement MCB SPN 32 amps 230 volt 10 KA, tyep B complete all as specified and directed.

S & F in replacement MCB SPN 63 amps 230 volt 10 KA, type B complete all as specified and directed.

S & F in replacement MCB SP 6 to 32 amps 230 volt 10KA type B complete all as specified and directed.

M & L for sub main wiring with two runs of 6 sqmm single core multi stranded FRLSH PVC insulated and unsheathed copper conductor (red for phase and black for neutral) & one run of 6 sqmm single core multi stranded FRLSH PVC insulated and unsheathed copper conductor wire green coloured for earthing of grade 1100 V, FRLSH cable in and including electrical grade PVC casing caping of desired colour not less than 1.2 mm thick and 25 mm wide with complete accessories duly connected with earth dolly complete all as specified and as directed incl taking down old unserviceable one. Note: Two runs of 6 sqmm single core multi stranded PVC copper conductor,one run of 6 sqmm single core multi stranded PVC copper conductor and one run of PVC casing caping shall be measured as one length for payment.

M & L for sub main wiring with two runs of 4 sqmm single core multi stranded FRLSH PVC insulated and unsheathed copper conductor (red for phase and black for neutral) & one run of 4 sqmm single core multi stranded FRLSH PVC insulated and unsheathed copper conductor wire green coloured for earthing of grade 1100 V, FRLSH cable in and including electrical grade PVC casing caping of desired colour not less than 1.2 mm thick and 25 mm wide with complete accessories duly connected with earth dolly complete all as specified and as directed incl taking down old unserviceable one. Note: Two runs of 4 sqmm single core multi stranded PVC copper conductor,one run of 4 sqmm single core multi stranded PVC copper conductor and one run of PVC casing caping shall be measured as one length for payment.

M & L for earthing complete with Gl earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground ( earth pit not less than 2.25 m deep below GL ) with top edge of the plate not less than 1.5 m below the normal ground level connected with GI strip 25x3 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel including necessary excavation & earth work in any type of soil, removing surplus soil to a distance not exc 50 M, with and including PCC chamber in PCC (1 : 2 : 4), type B1, using (20 mm graded stone aggregate), mild steel frame made out of angle iron of size 40 mm x 40 mm x 6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6 mm thick Cl cover with handle , watering arrangement with funnel internally secured with wire mesh with 20 mm dia medium grade GI pipe for watering, 40 mm dia light grade, Gl pipe for lead protection with and including alternate layer of charcoal dust and common salt complete all as shown in electrical plate No 3 of SSR Part I connected to earthing test point all as specified and indicated including testing on completion including retrieving of old GI earth plate, CI cover, GI pipes, angle iron frame from existing earthing as directed.

Supply and fixing calling bell ding dong AC 230 volts, single pole complete all as specified and as directed incl taking down old unserviceable one.

S & F single pole and neutral encloser with two pin and earth plug and socket complete with one single pole MCB 20 amps complete all as specified and as directed incl taking down old unserviceable one.

Supply and fixing LED lamp 10 watts 230V pin type 230 V 50 Hz as specified and directed.

Supply and install water heater storage type electric (Geyser) of 25 Ltr capacity closed and vertical type suitable for AC single phase 240 volt 50 Hz complete with feroglass technology heating element incoloy glass coated with digital thermostat 7 cuatout heavy duty anode rod PUF insulation 5 star rating (rating year 2017) digital LED indicator of warranty period 5 years.

Supply and fix PVC exhaust fans AC single phase 230/240V of size 300mm sweep with louver complete all as specified and as directed incl taking down old unserviceable one.

Aakar Construction

BSK Construction

Mukund Engineers and Contractors