REPAIR REPLACEMENT TO CERTAIN BR WORK IN OFFRS JCOS ORS MD ACCN AND OTM ACCN UNDER AOR OF AGE BR I OF GE NORTH DELHI CANTT 10

Amount

Demolition of reinforced cement concrete (Reinforcement cut as required to facilatate demolition) of any description and in any position not otherwise specially provided complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) of any thickness of any description and in any position not specifically provided for complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick joint free area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 set and jointed in neat cement slurry and pointed in coloured cement including dismantling floor, hearth or wall tiling including cement mortar bedding and also backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

All as per the description of srl item No 3 above but in vertical surface as in skirting, dado and risers to steps over and including10 mm thick rendering/backing coat in cement mortar 1:4 complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 set and jointed in neat cement slurry and pointed in coloured cement. including dismantling floor, hearth or wall tiling including cement mortar bedding and also backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surface area of each tile 0.06 to 0.15 Sqm each set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering 10mm thick in CM 1:4 and finished rough, complete including dismantling floor, hearth or wall tiling including cement mortar bedding and also backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L 3D exterior designer coloured matt finished wall tiles 300mm x 600mm design as approved over 10mm thick rough finished rendering in cement mortar 1:4 including taking down and removal from site complete all as specified and directed.

M&L for double charged vitrified coloured tiles shade as approved 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 1.0 sqm, in floors, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including screed bed or bedding layer of mortars 15mm thick in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding and also backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

All as per the description of srl item No. 8 above but as in vertical surfaces such as skirting/ dado over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for 75mm thick type-D-2 1:4:8 (using 40mm graded crushed stone aggregate) as in sub base to receive stone slab and pavement complete all as specified and directed.

M&L 20 to 25mm thick pre-polished machine cut Kota stone slab as in flooring over and including 15mm thick screed bed in cement mortar 1:6, laid over cement slurry @ 3 Kg/Sqm and jointed with grey cement slurry mixed with pigment to match with shade of slab including molding the edge of slab complete all as specified and directed. Note:- The size of Kota stone slab shall not less than 550mm x 550mm cut size in flooring and full length single piece in steps, except the location where the balance portion remain less than size as specified above.

M&L 20 to 25mm thick pre-polished machine cut Kota stone slab as in riser or vertical surface over and including 10mm thick rendering in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match with shade of slab including molding the edge where as specified and as directed. Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size as in flooring and full length single piece in steps, except the location where the balance portion remain less than size as specified above.

M&L for machine cut makrana green/white marble 18-20mm thick in flooring as in border in any pattern over and including 15mm cement screed bed in cement mortar 1:6 jointed and pointed with white cement slurry including mirror polishing/diamond polishing using carborandum stone of 0 unit including rubbing & treating the surface complete all as specified and directed

M&L for reinforced cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate in chajjas complete all as specified and directed. (reinforcement to be measured separately).

M&L reinforced cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. Note:- The reinforcement shall be measured and paid separately.

Mild steel TMT bars 6 to 8mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Formwork to sides and soffits of slabs n. exc. 200mm thick and similar works rough finished surfaces of concrete complete all as specified and directed.

Use and waste of formwork to chullah hoods, chajjas, throughs and similar items including edges complete all as specified and directed.

M&L for brickwork with subclass 'B' Brick straight or curved on plan exc 6m mean radius, built in, built in cement mortar 1:6 complete including demolition of brick work at any position all as specified.

Taking down existing cement plaster or complete removal of existing pointing and finishes including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar 1:4 on faces of brick work or concrete external surfaces of wall finished even and smooth without using extra cement all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:6 on faces of brick work or concrete internal surfaces of wall finished even and smooth without using extra cement all as specified and directed.

M&L 5mm thick rendering in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even and smooth complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparing old decorated plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for preparing new plastered surfaces of wall and applying two coats of oil bound distemper white or tinted over and including a coat of 2mm wall care putty and chalk whiting on plastered surfaces preparatory to distempering complete all as specified and directed.

M&L for complete removal of existing treatment and preparing old decorated surfaces of wall and applying two coats of oil bound distemper over a coat of 1mm wall care putty complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of cement primer complete all as specified and directed.

M&L for complete removal of existing treatment of wall including cornices etc. by washing, rubbing down and stopping holes, and applying two coats of cement base paint over one coat of primer of approved shade complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided complete all as specified and directed.

S&F steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking up or down steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F steel water tubes, medium grade, ISI marked, galvanised, 20mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking up or down steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

All as per the description of srl item No 31 above but except GI tubing.

All as per the description of srl item No 32 above but except GI tubing.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, ISI marked, double alyered hoisted and fixed in position including connecting up pipes including dismantling of PVC water tanks complete all as specified and directed.

S&F in repairs 32mm dia waste pipe including necessary fittings to sink or wash hand basin complete all as specified and directed.

S&F in repairs 20 mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete.

S&F ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic wall, screwed for iron pipe and fixed for 20mm bore size (Minimum weight 210gms), complete all as specified and directed.

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubings, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor 75mm bore including dismantling/taking down PVC/CI drain/rain water pipe complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor 110mm bore including dismantling/taking down PVC/CI drain/rain water pipe complete all as specified and directed.

S&F PVC (SWR) bends any radius, 75mm bore, complete all as specified and directed.

S&F PVC (SWR) bends with access door any radius, 75mm bore, complete all as specified and directed.

S&F PVC (SWR) bends any radius, 110mm bore, complete all as specified and directed.

S&F PVC (SWR) bends with access door any radius, 110 mm bore, complete all as specified and directed.

S&F PVC (SWR) vent cowl, 75mm bore complete all as specified and directed.

S&F in repairs stainless steel plate rack (utensil rack) of size (600mm x 750mm) and depth 300mm made with 0.55mm thick stainless steel sheet provided with brass screw including necessary fittings, nut/bolts complete all as specified and directed.

S&F in repairs soap dish disc (oval) type, mild steel chromium plated of approximate size 100mm x 50mm x 10mm, complete all as specified and directed.

S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.50 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S&F in repair Viitreous china premium/1st quality wash down water closet wall hung EWC white/ivory/off white (closed pattern including seat cover and all necessary accessories like rag bolts/gel gasket etc, (excluding flushing cistern & flush pipe) complete in all respect all as specified.

S&F in repairs Vitreous China valveless, syphonic action type, flushing cistern, with dual flush bottons of capacity 10 ltrs low level, white, with inlet, ball valve, float and handle including brackets and flush pipe.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass self 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate mix with WPC complete all as specified and directed.

S&F in repairs stainless steel sink with drainage board, made out of 1.00 mm thick sheet with plug, washers, waste pipe, cast iron cantilever brackets, connecting union over all size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs tubular towel rail of brass chromium plated, 20mm dia, 'D' type, 60cm long between flanges complete all as specified and directed.

S&F in repairs stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15mm bore complete all as specified and directed.

S&F in repairs bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete.

S&F in repairs brass CP mixer/wall mixer for mixing hot & cold water screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore including connection pipe and fittings complete all as specified and directed. .

S&F in repairs brass chromium plated shower rose 65 to 90mm size with swivel joints, wall flange complete all as specified and directed.

S&F in repairs 10 litre capacity PVC low level flushing cistern ‘ white’ with inlet, float valve including bracket with 32mm dia PVC waste/flush bend pipe appx 600mm long complete all as specified and directed.

S&F in repairs PVC connection 600mm long and 15mm dia with brass fly nut at both ends complete all as specified and directed.

S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, of size 580mm x 440mm white with integral foot rest complete including trap and plain cement concrete bedding, outgoing flushing pipe, anti syphonage pipe etc complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) including trap, white including fixing bolts, flushing cistern and flush pipe connection to trap and to flushing pipe in bend cluding provn of cement concrete beading complete all as specified and directed.

Supply only EWC seat cover white colour as approved of PVC closed pattern with flat bottom and mild steel lchromium plated or aluminised hinging device complete all as specified and directed.

S&F vitreous china wash hand basin white, flat back of size 550mm x 400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32mm dia PVC waste pipe including fixing of tap, waste fitting etc complete all as specified and directed.

S&F 32mm dia bore low density polyethylene pipes (LDPE) of pressure rating 6kgf/cm2 fixed complete to walls, ceilings or in floors etc for WHB and sink complete all as specified and directed.

S&F in repairs chromium plated brass angle valve concelled type for 15mm bore pipe, fixed in repairs complete all as specified and directed.

Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) all as specified and directed.

Taking down door shutters of any description exc 1 Sqm & n.exc 2 Sqm each complete all as specified and directed

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suppling & fixing in opening as per specification & drawing.

S&F factory made solid panel PVC Door Shutter 30mm thick (style) consisting of frame made out of MS tubes for tip & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together wit solvent cement, supplilng & fixing in the frame at site as per specification & drawing.

S&F 30mm thick second class hardwood glazed and skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, any numbers, beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

All as per the description of srl item No 75 above but without glazing bars

S&F sheet glass ordinary quality, 4mm thick and glazing with oil putty in square n.exc. 0.5 Sqm in each pane complete all as specified and directed.

S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with stainless steel wire staples including wooden beading, tinned tacks to steel windows and wooden doors shutters complete all as specified and directed.

S&F in repair stainless steel, wire cloth 0.56mm nominal dia of wire, and average width of aperature 1.18mm and fixed to steel or wooden window or doors with wooden beading necessary fixing arrangement complete all as specified and directed.

S&F flush shutters 30mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides with leaping and beading complete all as specified and directed.

S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified

S&F powder coated of any colour aluminium door shutters, aluminium section weighing 0.55 kg/m incuding necessary joining cleats, glazing clips, ruber neoprene packing handles 2 Nos, tower bolt in each door shutter, hinges powder coated aluminum snap beading screws etc, complete all as specified and directed.

S&F powder coated of any colour aluminium window and ventilator shuttrs, fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing anodised aluminium snap beading screws etc complete all as specified and directed.

S&F 4 to 5mm thick sheet glass panes ordinary quality and glazing with rubber beading and aluminium glazing clip/patti area n.exc 1.00 Sqm each pan.

Mild steel conforming to Fe 410-0 or Fe 310-0 in framed work such as grills, gratings, door frame etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete all as specified and directed.

S&F mild steel, plain, black sheet of 1.60mm thick in wall cladding steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up mitred angles etc as required

Rolled mild steel sections conforming to Gde Fe-410-0 or Fe-310-0 as in coolar stand including making holes in rick work and fixed with plain cement concrete or as specified and directed.

Taking down/dismantling old particle board or any board kitchen cabinet with wardrobe including fillets and making good disturbed surfaces all assessary complete all as specified.

S&F 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cupboard, kitchen cabinet etc complete all as specified and directed.

Extra over rates of width 18/19mm of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails complete all as specified and directed.

S&F 2nd class hard wood plain fillets square, rectangular or triangular in section of size exc 13 and n exc 25 Sqcm , wrought, secured with nails or brads to wall, column etc complete all as specified and directed.

S&F magnetic catches with steel body ‘H’ type, fixed to shutter complete all as specified and directed.

S&F continuous (piano) hinges of width 30mm when open flap) , mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor of size 140mm complete all as specified and directed.

S&F 100mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 4 levers brass cupboard locks grade-I, size 65mm complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F butt hinges, 100mm size medium weight, cold rolled mild steel complete all as specified and directed.

S&F aluminium handles 150mm size cast type, anodised complete all as specified and directed.

S&F 300mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed.

S&F stainless steel chromium plated tubing of 25mm dia curtain rod fancy type including fancy type CP brabs brackets (wall to wall or flush to wall) with finials or end caps decorative type as approved by GE for securing to curtain rod to wall in position, fixed in repair complete all as specified and directed.

M&L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed.

M&L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed.

M&L for two coats of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise descriped over 10cm width or girth complete all as specified and directed.

M&L for two coats of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise descriped over 10cm width or girth complete all as specified and directed.

M&L for 40mm thick Plain Cement concrete 1:2:4 type B-1, (20mm graded crushed stone aggregate) as in floors and finishing cement concrete surface even and smooth with using extra cement.

M&L cement concrete 1:3:6 type C-1, (using 20mm graded crushed stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair without using extra cement including making joints at every 2.5m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight including necessary form work and complete all as specified.

Removing of existing water proofing membrane, damage plaster, vegitation/plants, PCC, mud fuska, tar-felt, loose particles and all forgin materials over the roof and shifting the debris from site to out-side area as directed by authority on factory garbage area.

Cleaning the surface & removing of dust, existing paints from wall & roof surface, finding visible crack making V - groove by machine on crack area, providing & applying polymer bonding agent 1:2 & filling those grooves by modified cement & sand mortar 1:4 with WPM liquid (5% by wt. of cement). Waterproofing coating-Providing & applying 1st coat WPM with brush/roller after mixing with cement at 1:1.5 (1 part ofand 1.5 part of cement & 2nd coat with an interval of 10 to 12 hrs by brush or roller to get average thickness of 1.5mm. The system will be allowed to air cure for 7 days covering including parapet both side wall. Note - The work is to be executed through authorised applicator.

M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregates as coping including weathering, slightly rounded, chamfered angles and finishing exposed surface even and smooth including necessary form work complete all as specified and directed.

M&L for preparation of new or old plastered surfaces of wall and applying two or more coat of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489;2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surface complete all as specified and dierected.

S&F in repair for gypsum ceiling board for ceiling prepainted, perforated finish, 600mm x 600mm x 9mm to 9.5mm thick or 600mm x 600mm x 4mm to 6mm thick E-board of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32mm x 24mm for main, 25mm x 24mm for cross tee and 20mm x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2mm thick G.I. suspension wires spaced at 1200mm on main runners including making niches for fans/light at as specified and directed.

M&L for 15mm thick cement plaster on surfaces of concrete in CM 1:4 on roof surfaces (Over PCC Padding) mixed with WPC @ 200ml per 50 Kg of cement complete all as specified and dierected. Note : WPC shall be measured and paid separately

Supply only liquid water proofing compound

S&F in repairs with complete installation of wind operator turbo air ventilator of size 600mm dia made of stainless steel sheet including dual ball bearing fixed over assembly made of polycarbonate transparant sheet of size 5.5 x 3.5 feet on roof of steel structure shed working height up to 15 meter all as specified and directed

Supply only steel wheel sutaible for sliding steel door shutters on top or bottom rail including bush or ball bearing and all consumable items for making operational complete

S&F steel rolling shutters, gear operated type with bevel gear box and crank handle without ball bearing as specified including top covers anchoring rod, hasp & staple and one shop coat of red oxide primer and errected in position complete thickness of laths 1.25mm complete all as specified and directed.

S&F safety lever locks mild steel with 4 levers for rolling shutters

Supply only mild steel helical wire spring 45cm long, 75mm dia and weight of each spring not less than 3.00 kg complete all as specified and directed

S&F for ball bearing for rolling shutters make as approved all as specified and directed.

Rohan Construction Company

The new hut furnitures

Paradise Interior

ANSH VANSH CONSTRUCTION COMPANY

friends associeates

M/s SAAR ENGINEERS

Keshav Brothers