TENSILE ROOF STRUCTURE AND FLOORING WORKS FOR FIRST AID CENTER IN HELICOPTER DIVISION HAL-HC

Demolishing cement concrete manually/ by mechanical means without causing any damage to the surroundings including disposal of material within 50 metres lead, hire charges of machinery and equipments, cost of all materials, labour charges and all other incidental charges etc., all complete as per directions of the Engineer in charge.

Demolishing R.C.C. work manually/ by mechanical means without causing any damage to the surroundings including stacking of steel bars and disposal of unserviceable material within 50 metres lead, hire charges of machinery and equipments, cost of all materials, labour charges and all other incidental charges etc., all complete as per directions of the Engineer in charge.

Earth work in excavation in all kinds of soil by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, hire charges of machinery and equipments, cost of all materials, labour charges and all other incidental charges etc., all complete as per directions of the Engineer in charge.

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases of columns, etc. for mass concrete including attached pilasters, butteresses, plinth and string courses etc. The rate quoted shall include all lead, lift, hire charges of machinery and equipments, cost of all materials, labour charges and all other incidental charges etc., all complete as per the directions of the Engineer in Charge of the work. Note: Form work material contractors own property and shall be removed after completion of work.

Providing and Laying in position Cement Concrete of 1:4:8 (1 cement : 4 coarse sand (zone3) derived from natural sources : 8 graded stone aggregate of 40 mm nominal size derived from natural sources) excluding the cost of centering and shuttering for all work upto plinth level including all lead and lift, hire charges of machinery and equipments, curing, cost of all materials, labour charges and all other incidental charges etc., all complete as per the directions of Engineer in Charge of the work.

Providing and laying in position reinforced cement concrete of 1:2:4 grade 4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) all works upto plinth level excluding the cost of centering, shuttering and reinforcement but including curing, carriage for all leads; hire charges of machinery and equipments, cost of all materials, labour charges and all other incidental charges etc., all complete as per the directions of Engineer in Charge of the work.

Supplying, fabrication and fixing in position of TMT reinforcement bars of grade Fe-500D or more for R.C.C work up to plinth level including straightening, cutting, bending, hooking, cranking, placing in position, lapping wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including all lead and lift ,hire charges of machinery and equipments, cost of all materials,labour charges and all other incidental charges etc.., all complete as per directions of the engineer in charge of the work.

Brick work with common burnt clay machine moulded modular bricks of class designation 12.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) from ground level upto plinth level including all lead and lift, hire charges of machinery and equipments, curing, cost of all materials,labour charges and all other incidental charges etc., all complete as per directions of the EIC.

Providing and laying Brick work in position with Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement :4 coarse sand) including all lead and lift, hire charges of machinery and equipments, charges for providing & removing scaffolding wherever required, racking out joints 10mm deep to receive plaster, curing, cost of all materials,labour charges and all other incidental charges etc., all complete as per directions of the EIC.

Providing and rendering internal plastering in Cement mortar (1:6) of 12 mm thick over brick work/block work/concrete surfaces and finishing the surface fair & even at any height. The rate quoted shall include all lead and lift, preparation of surfaces, curing of plastered surfaces, cleaning stains and dripping mortar from floors and walls etc., hire charges of machinery and equipments, charges for providing & removing scaffolding wherever required, cost of all materials,labour charges and all other incidental charges etc., all complete as per directions of the Engineer in charge.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m all complete as per directions of the engineer in charge.

Providing and laying factory made chamfered edge 60 mm thick cement concrete paver blocks of M-35 grade in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand etc. The rate quoted shall include all lead, lift, hire charges of machinery and equipments, cost of all materials, labour charges and all other incidental charges etc., all complete as per the directions of the Engineer in Charge. Note: Colour, Design and Pattern shall be paid approved by EIC/OIC.

Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways, neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick, 100 mm wide MS sheet duly painted over priming coat, reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc iincluding cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.

Providing and laying Polished Granite stone flooring of Black, Cherry/Ruby Red or equivalent in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved all complete as per directions of the engineer in charge.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.The rate quoted shall include all lead & lift, hire charges of machinery and equipments, charges for providing & removing scaffolding wherever required, cost of all materials, labour charges and all other incidental charges etc.., all complete as per the directions of the Engineer in charge.

Single socketed Pipe - 110 mm dia - Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.The rate quoted shall include all lead & lift, hire charges of machinery and equipments, charges for providing & removing scaffolding wherever required, cost of all materials, labour charges and all other incidental charges etc.., all complete as per the directions of the Engineer in charge.

Coupler - 110 mm- Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.The rate quoted shall include all lead & lift, hire charges of machinery and equipments, charges for providing & removing scaffolding wherever required, cost of all materials, labour charges and all other incidental charges etc.., all complete as per the directions of the Engineer in charge.

Single tee with door - Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.The rate quoted shall include all lead & lift, hire charges of machinery and equipments, charges for providing & removing scaffolding wherever required, cost of all materials, labour charges and all other incidental charges etc.., all complete as per the directions of the Engineer in charge.

Bend 87.5° - 110 mm - Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.The rate quoted shall include all lead & lift, hire charges of machinery and equipments, charges for providing & removing scaffolding wherever required, cost of all materials, labour charges and all other incidental charges etc.., all complete as per the directions of the Engineer in charge.

Shoe (Plain) - 110 mm - Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.The rate quoted shall include all lead & lift, hire charges of machinery and equipments, charges for providing & removing scaffolding wherever required, cost of all materials, labour charges and all other incidental charges etc.., all complete as per the directions of the Engineer in charge.

Providing & Finishing walls with Acrylic Smooth exterior paint of required shade, approved brand and manufacture with two or more coats on old work, including one coat of primer and finishing the walls smooth and uniform, along with all necessary tools and tackels, staging and scaffolding, if required & also including the cost of crack filling & preparation of surfaces, etc., all complete as directed by the Engineer in charge.

Providing and applying white cement based putty of average approx. thickness 1 mm in one or more coats as required of approved brand and manufacturer, over the old plastered wall surface to prepare the surface even and smooth along with all necessary tools and tackels, staging and scaffolding, if required, all complete as directed by the Engineer in charge.

HD/CM-PM/CIVIL/WO469-1/25-26

TENSILE ROOF STRUCTURE & FLOORING WORKS FOR FIRST AID CENTRE IN HELICOPTER DIVISION, HAL(HC)

Description

Name of the Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc.,

MSME Registered Firm: YES/NO

Size Of Firm ( Infrastructure ): MICRO/SMALL/MEDIUM/LARGE

Owner Of Firm: SC/ST/WOMEN/SCST WOMEN/OTHERS

Address for correspondence:

PAN No.:

PF Registration No./ Code:

ESI Registration No./ Code:

Goods and Service Tax Registration No. (GST No)

Contact details

Registered Contractor

Related Document to be Uploaded to eProcurement Portal * Category: E=75 Lakhs-Less than 100 lakhs F=50 Lakhs-Less than 75 lakhs G=25 Lakhs-Less than 50 lakhs H=10 Lakhs-Less than 25 lakhs I= 5 Lakhs-Less than 10 lakhs J= 2 Lakhs-Less than 5 lakhs K= Less than 2 Lakhs

Average annual financial turn over during the last 3 years, ending 31st March 2024 of the previous financial year [ should not be less than 30% of Amount put to tender]

TURN OVER IN Rupees

Audited Report duly certified by the Chartered Acountant to be enclosed to support the turn over .

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender Notice.

Related Document to be Uploaded to eProcurement Portal

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of the estimated cost put to the tender.

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Tender Document Cost and EMD details

Related Document to be Uploaded to eProcurement Portal

Validity Of the Offer

If not agreed please mention Validity Period

Acceptance of Work Completion Shedule

If not accepting, deviaton to be mentioned in detail

Acceptance of Tender Scope,Terms & Conditions

If not accepting, deviaton to be mentioned in detail

Statutary Reqirments

If not agreed the offer will be rejected

Details of Daviations if any

Tender Clause Refernce

DECLARATION