55/EUCC-V/LESA/2023-24

Amount

Dragging, loading, carriage and unloading of following store materials with proper stacking from ESC Daliganj to JE dumps store and from JE dump store to work site within municipal area.

33KV 3X300 SQ MM XLPE CABLE

33 KV ST/TH C/J KIT 3X300 SQ MM

33KV END TERMINATION O/DOOR 3X300 SQ MM

33 KV LINE ISOLATOR 800 AMP

ACSR PANTHER CONDUCTOR

STP 11 M long

33 KV pin insulator

Top chanel 100X50 MM 10 kg / mtr

MS angle 65x65x6MM 5.8 kg / mtr

33 KV pin with nut

M S Earthing Rod 20x2500 mm

LT XLPE Cable AL.1X400 Sq.mm.

MS channel 100x50 mm

MS Channel 125x65mm 3.5m long 4 Nos Pieces [email protected] Kg. Mtr. With wastage

MS Angle 75x75x6, 2.6M 2 Nos Total [email protected] Kg./M with wastage

Laying of Double CKT 33 KV 3x300 sq mm XLPE cable in digging of trench 1100 mm, deep, 650 mm wide its boxing with brick,sand,stone slab after laying of cable filling and proper levelling& ramming. The ferruling of cable also include in this work

Laying of 33 KV 3x300 sq mm XLPE cable D/C in by HDD method as per Norms. The ferruling of cable also include in this work

Laying of 33 KV 3x300 sq mm XLPE cable D/C in GI pipe by HDD method as per Norms. The ferruling of cable also include in this work

Laying of 33 KV 3x300 sq mm XLPE cable D/C in HDD pipe by HDD method as per Norms. The ferruling of cable also include in this work

Fabrication, erection, grouting, plinthing & painting of 11 mtr STP pole for 33 KV cable exposure D/P with fixing of necessary clamp channel ,angle 33 KV Pin & pin insulator making single ckt 3 phase 3 wire bus bar for separate cable with single core cable including electrode earthing , danger boared,barbed wire complete in all repect as per RESPO Norms .

Fabrication & Erection of cable stand made of two nos MS channel 100x50x3 mtr. Long jointed to each other by means of 05 nos MS strip 50x6 mm of size 150 mm Long each by welding at equal distance interval as per norms and grouting in block of 300x300x700 completely providing two nos cable clamp also.(All materials will provide by contractor except MS channel).

Isolator Structure-Fabrication of Isolator structure minimum 3.5 mtr overall height and 2.5 mtr above ground level as per RESSPO drawing, with help of M.S channel 125x65 mm two pieces of M.S channel joined to each other by M.S flat 50x6 mm, diagonally at the interval of 0.5 mtr and top & bottom of the structure. Grouting of Isolator structure in CC (cement ,coarse sand and stone grit of 20 mm gauge) including supply of necessary T&P and painting os structure complete.(only M.S channel and angle provided by the deptt)

Pipe Boring type earthing complete upto water level/ minimum 20 mtr deep from ground level complete Job with connection of quipment by 50x6 mm GI Strip

Painting of all excisting structures equipment.

Mounting of accessories/equipment on fabricated structure complete work with making proper alignment and tightening the work includes fabrication work if required for proper operation of equipment .

Bus/Line Isolator

Hoisting of 3x300 sq mm sizes of 33 KV single cable on existing/erected double pole including GI pipe 3 mtr long 6'' dia including jumpering,dressing of cable with required all necessary clamps and nut, bolts.

Earthing of ST pole with MS-Earthing rod 25Х2500 mm earth wire with nut and bolts as per RESSPO norms(all material shall be provided by contractor except MS-Earthing Rod).

Hoisting of 3x300 sq mm 33 KV XLPE cable on cable stand

High Pressure & Fault locating if required Testing of 33 cables/line as per norms

SINGH ENTERPRISES

SIDDHI ENTERPRISES