COMPREHENSIVE REPAIR/MAINT TO ORS AND JCO MARRIED ACCN OF TSR AND MES JCOS ACCN OF AGE B/R CENTRAL UNDER THE AOR OF GE DEOLALI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Virified Ceramic tiles (Light Shade) 8mm to 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. with and including 15mm thick screed bed in CM 1:6,set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed.

Ditto all as item No.2 but in skirting over 8 to 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L joint free non - skid Ceramic tiles 7 to 8 mm thick (Coloured) (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. with and including 15mm thick screed bed in CM 1:6,set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed.

M&L for joint free coloured glazed ceramic tiles in vertical surface of size 450 X 300 X 7mm thick of different shade colour and pattern as approved, over and including 10 mm thick rendering in CM 1:4 as backing coat finished to receive wall tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as directed and specified.

Demolition of stone slabs, paving stones and tiles of any description and thickness in floors, aprons, laid, bedded and pointed in any mortar complete all as specified and directed.

M & L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including rubbing and polishing complete all as specified.

M & L for 15-18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes complete all as specified.

M & L for 15-18mm thick Artificial Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes complete all as specified.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq m each complete all as specified and directed.

Taking down Shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x100 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan.

Ditto but of Frame size 65x 125 mm double rebate

S & F 2nd class H.W. glazed & skeleton shutter 35mm thick factory made open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass,gauge etc size of members complete all as specified and directed.

S & F 2nd class HW shutters 35mm thick, plain framed paneled shutter factory made (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 complete all as specified and directed.

S&F 30mm thick flush door shutters solid core construction with block board core and plywood face panels commercial type on both sides etc complete all as specified and directed.

S&F 28-30 mm thick prelaminated moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified

S&F 28-30 mm thick Prelaminated Flush WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded side with wood grain texture with density not less than 650 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified

S&F 28-30 mm thick Prelaminated WPC factory made 100% Sketon/Glased door (conforming as per IS-4020) made from 100% lead free single extruded on both side with wood grain texture and including Extruded board CNC machine cut jali shutter inserted in between sketon and with density not less than 650 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified

S&F stainless steel wire cloth 304 Grade 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed.

S&F 100 mm long Butt hinges, Stainless Steel, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and as directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and as directed.

S&F 150 mm long Extruded Stainless Steel handles designer type, fabricated type polished complete all as specified and as directed. Make : Prayag,Prima etc

S&F 150mm size Stainless Steel barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed. Make : Prayag,Prima etc

S&F in repair mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and as directed.

M&L for 250mm longStainless Steel, sliding door bolt withsand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed. Make : Prayag,Prima etc

M&L for preparation of old painted wood or wood based surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sq. m each complete all as specified and directed.

S & F bombay sliding powder coated aluminium three track sliding windows, including fabrication of frame size 94mmx 34mmx1.50mm and three track shutters frame size 40mmx 18mmx18mm( two glass shutters of 2mm and one wiremesh shutter) and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, provn of AC opening and rubber beadings for fixing glass panes in frame complete all as specified by Engr-In- Charge. Note : (i) the quoted rate shall be inclusive of cost of 4mm thick Glass panes and steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm. (ii)The quoted rate shall be inclusive of cost of rubber beading and glazing clips,hinges, handle. However it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India

S&F for powder coated aluminium ventilator shutters with frame not less than 0.55 Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick frosted glass and outer side fixed with stainless steel wire mesh, shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed.

S & F in repair 4.00 mm thick sheet glass fixed in window shutters including Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads etc complete all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and fixed in any position etc complete all as directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and as directed.

M&L for preparation of New untreated steel or iron surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Dismantling of boarding any description fixed in any position with nails complete all as specified and as directed

S&F factory made 100 % solid wood plastic composite (WPC) flush type shutter of 18mm thickness one side laminate consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of denisity 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc complete as per manufacture specification.Make : ECHON/Sintex/Rajshree/Navratan

S&F soft closing hinges 35 mm of 0 crank( KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters Make :Hexa, Hettich, Hafele

S&F for door/shutter catcher, magnetic stopper/holder with striking plate for WPC board cabinets, cupboard shutters complete all as specified.

S&F 100 mm long Extruded stainless steel handles designer type, fabricated type polished complete all as specified and as directed.

S&F in repair 25 mm stainless steel curtain rod 1 to 2mm thick with designer funnel complete all as specified and directed by Engr-in-charge.

S&F SS heavy duty decorative brackets suitable for 25mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed. Note: Curtain rod shall be measured and paid separately

S&F in repairs glazed earthen ware viterous china wash down water closet(pedestal pattern) white coloured with and including plastic water closed seat, white, closed pattern with recessed bottom, and cover and mild steel chromium plated EWC Size: 340x515x405 mm, S Trap With PP Soft Close Slim Seat Cover, Hinges, Fixing Accessories And Accessories etc complete all as directed. Make: Cart No. AIS-WHT-101551SSPPSM of ESSCO by Jaquar group or Equivalent

S&F in repairs glazed earthen ware viterous china wash down water closet(pedestal pattern) white coloured with and including plastic water closed seat, white, closed pattern with recessed bottom, and cover and mild steel chromium plated EWC Size: 340x550x400 mm, P Trap-180 mm With PP Soft Close Slim Seat Cover, Hinges, Fixing Accessories And Accessories etc complete all as directed. Make: Cart No. AIS-WHT-101955P180SPPSM of ESSCO by Jaquar group or Equivalent

S&F in repairs viterous china wash down water closet squatting pan (Squatt pattern) of pattern "long pan:,Size: 450x535x180mm white,Asian Pan with L Bend and Extension, with integral foot rests any pattern including provn of cement concrete bedding and making connection with & including pors trap etc complete al as specified adn directed. Make: Cart No. ECS-WHT-455LE of ESSCO by Jaquar group or Equivalent

S&F in repairs glazed earthen ware viterous china wash basin white coloured (flat back or angle back type), size 555x410x205mm mm Wall Hung Basin with Fixing Accessories, and including CI brackets, outlet of 32 mm bore HDPE outlet pipe with necessary fittings ,32 mm bore brass CP waste couplings and bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed etc complete all as directed. Make: Cart No. ECS-WHT-801 of ESSCO by Jaquar group or Equivalent

S&F in repair 15mm dia brass chromium plated Fancy Pillar taps,with Swan Neck Tap with Left Hand Operating Knob capstan heads,screwd down high pressure, with or without lettered Hot or Cold with long screwed shanks anf fly-nutd,screwed for GI pipe and fixed complete all as specified and directed. Make: Cart No. STE-107123 of ESSCO by Jaquar group or Equivalent

S&F in repair Maze Overhead Shower 150x150 mm Square Shape Single Flow (ABS Body Chrome Plated) with Rubit Cleaning System including shower arm of size 400x25x25mm sq shape for wall mounted showers with flange, fixing to steel pipe or union complete all as specified . Make: Cart No. EOS-442 of ESSCO by Jaquar group or Equivalent

S & F in repair for 15 mm bore, fancy type, Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange and including Telephone Shower complete all as specified and as directed by Engr-in-Charge Make ESSCO by Jaquar group Cat Part No:STE-107281, Hand shower SAE-1931SH555, flexible tube SAE-547D8 of ESSCO or equivalent.

S&F in repair Stainless Steel chromium plated Towel Rail 600mm Long,complete all as specified and as directed by Engr-in-Charge. Make: Cart No. AEC-1111N of ESSCO by Jaquar group or Equivalent

S & F in repair 15 mm bore, fancy type, bib taps, long body, cast copper alloy, 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-Charge. Make: Cart No. ORB-105107 of ESSCO by Jaquar group or Equivalent

S & F in repair 15 mm bore, fancy type, angular valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-in-Charge. Make: Cart No.ORB-105053 of ESSCO by Jaquar group or Equivalent

S&F for 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and as directed..

S&F in repair Health Faucet Kit (Flexible Hose,Handset, ABS Body & Bracket) with 1.20 M Long PVC Tube and wall Hook screwed down to GI pipe or union/angle valve complete all as specified and directed by Engr-in-charge. Make: Cart No. ALE-CHR-593 of ESSCO by Jaquar group or Equivalent

S&F in repair 15mm dia brass chromium plated two way bib cock with long wall flange screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. Make: Cart No. COS-103041 of ESSCO by Jaquar group or Equivalent

S & F in repairs Smart Single Flush Wall Hung Cistern with 39mm Drainage L-bend Pipe with Gasket & Installation Kit PVC valve less, syphonic action type, flushing cistern 10 ltrs capacity, low level, white, with inlet, ball valve, float and handle, including brackets etc complete all as directed. Make: Cart No. ALE-CHR-593 of ESSCO by Jaquar group or Equivalent.

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm etc complete all as directed.MAKE : NIRALI/IDIAMOND

S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastesincluding bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm etc complete all as directed MAKE : NIRALI/IDIAMOND

Dismantling of water tanks (RCC Tank/PVC Tank) including disconnecting all connections etc Any capacity. complete all a specified.

S&F rotational moulded polythylene water storage tank 500 ltrs capacity (cylindrical/ vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing ball brass valve high pressure with polythene float and fly nut, 15mm bore complete for following capacity of tanks.

S&F in repair rotational moulded polythylene water storage tank 1000 ltrs capacity (cylindrical/ vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing ball brass valve high pressure with polythene float and fly nut, 25mm bore complete for following capacity of tanks

Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down 25mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Supplying and laying of GI pipes 15mm Tubes, 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.

Supplying and laying of GI pipes 20mm Tubes, 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.

Supplying and laying of GI pipes 25mm Tubes, 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.

Cutting chases in Stone, concrete block or slab walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth all as specified and as directed.

S&F in repair 25mm bore Gun metal gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.

S&F in repair 20mm bore Gun metal, globe or gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.

Dismantling of PVC Pipes with fittings upto 75mm to 110mm dia complete all as specified and as directed.

S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.

S&F for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.

S&F PVC (SWR) bend with access door any radius 110mm complete all as specified and directed.

S&F PVC (SWR) bend with access door any radius 75mm complete all as specified and directed.

S&F for 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F 75 mm PVC (SWR) junction single T equal or unequal complete all as specified and directed .

S&F in repairs 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F LDPE pipe 40mm bore fixed to wall/ceiling with bends/elbow complete all as specified.

Material and labour for water proofing treatment to sunken slab, walls, etc, and shall be carried out as specified below and as directed:- (a) Demolition of Cement concrete/brick bats filled on sunken slab upto mother slab including removing and Clean the sunken portion of toilet / Baths/ WCs/ Kitchen thoroughly to remove laitance, dirt, dust etc. (b) Brushing cement slurry with 1.2 kg of cement per square metre duly blended with & including water proofing compound. (c) 15 mm thick (Average thickness) plaster in cement mortar (1:4) mixed with water proofing compound on sunken surface including walls. The corner of sunken portion shall be rounded in concave shape and adequate slope shall be made during plastering to accommodate sump pipe and curing the sunken portion with water minimum for 48 Hrs by ponding. (d) Applying self adhesive type APP based polymeric membrane minimum weighing not less than 3.6 kg/ Sqm and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gm/Sqm) (e) M&L for PCC 1:7:12 type F2 using brick course agreegates for filling of sunken portion after conceling all menbrane upto FFL and sealing all joints to the entire satisfaction of Engineer-in-Charge. (Note:- Floor area shall be considered for measurement & payment purpose)

Taking down carefully existing unserviceable bitumen felt(any number of layers) including plaster of any thickness,wire brushing and cleaning of the surface of roof terraces including flashing and junctions of parapets kerb wall,PCC fillets,benching etc and removing of the rubbish to a distance not exceeding 500 M from the building and depositing where complete all as specified and directed.

M &L for providing 25 mm thick plain cement concrete 1:2:4 type B-1 (using 12.5 mm graded stone aggregate) for filleting, benching,coving of chajjah top/junctions,padding concrete below roof treatment etc slightly rounded or chamfered on edges wherever required including necessary form work / moulds etc complete all as specified and as directed .

M&L for rendering 10mm thick CM (1:4) on roof slab top, mixed with water proofing compound finished even and smooth without using extra cement complete all as specified. Note: Water Proofing compound shall be measured and paid separately.

M & L for cleaning the newly plastered surfaces of concrete ( roof etc) with wire brushes and applying water proofing treatment as under :- i) Applying one coat of bituminous primer @ 0.25 Kg/Sqm ii) Providing and laying 3 mm thick APP modified water proofing membrane weighing not less than 3.0 Kg / Sqm reinforced with non woven polyester mat weighing not less than 150 gm/Sqm all as specified procured from any one of the approved manufacturer's instructions iii) Apply two coat of aluminium paint @ 0.15 Kg/Sqm over membrane over roof surfaces complete all as per manufacturer's instructions and as directed .

Supply only water proofing compund as specified and directed.

Demolition of brick work / stone boulders masonry built in cement mortar incl all Quoins , archeas, pillars etc but exc cluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for Brickwork with fly ash Old size bricks, straight or curved on plan exc 6m mean radius, built in in CM 1:6 etc complete all as directed.

M&L for Autoclaved aerated concrete (AAC blocks)for masonry fixed with Ready Mix Jointing Mortar complete all as specied and as directed Makes/brands of Ready Mix Jointing Mortar shall be “Speed Dry Mix”/ “DUBOND”/ “MAGIC BOND”/ BUILDWELL”. Makes/manufacturers of AAC blocks :AEROCON/Ecolite/ ISI marked Grade I as approved by GE

M & L for 75 mm thick Cement concrete type C-2, 1:3:6 using (40 mm graded stone aggregate ) as in Plinth protection.

M&L for Rendering in 10 mm thick plastering 1:6 on brick work or concrete surfaces of any description in wall/ceiling etc finished surfaces even and smooth (without using extra lime or cement) complete all as specifed and directed.

M&L for 5mm thick ceiling plaster on concrete surfaces in CM 1:3 finished even and smooth with a thin layer of sagol complete all as specifed and directed.

M & L for provide 15mm thickplaster with ready mix plaster on AAC block/Brick Masonry (Makes/brand- ACC’s “ACCOPLAST”/ CK Birla’s “AEROCEN” / Magic Plast /Speed Dry Mix’s “ ECO PLASTER”complete all as specified and directed

M&L for complete removal of existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot moulds, moss, efflorescent salts, trading all, greasy spots etc and preparation

M&L for complete removal of existing treatment mechanically and applying Single Coat exterior weather coat (Apex paint or Eqivalent) over one coat of exterior primer, including properly making of V shape crakes and filling of all cracks with crakes seal inc. preparation of surface of old decorated wall etc complete all as directed. Make Asian Apex or equivalent.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces all as specified and directed by Engr-incharge

M&L for preparation of plastered surfaces of walls and applying one coat of alkali resistant primer and finally applying two coats of oil emulsion distemper etc complete all as directed.

M&L for applying 2mm thick wall care putty External/Internal on wall all as specified and directed.

M&L for preparation Old surfaces plastered or unplastered and applying two coat of white washing on ceiling all as specified and directed.

M&L for preparation Old surfaces plastered or unplastered and applying two coat of white washing on ceiling all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position from unframed work as in roof members complete all as specified and directed

Dismantling of Battens for tiles spaced exc 15cm, shingles etc, of any size including tilting fillets

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel pattern sheet 0.47mm to 0.50mm thick of an colour having tensile strength of 550Mpa and AZ-150 as in roof covering in hexagonal/rectangular/pentagonal shape cladding to wall fixed with self tapping screws as specified. Make: JSW Colouron+

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.47mm to 0.50mm thick of any colour having tensile strength of 550Mpa and AZ-150 as in roof covering including ridges /cladding to wall,fixed with self tapping screws as specified and directed. JSW Colouron+

M&L in Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240.

Dismantling of fencing wire mesh of any type complete all as specified and directed.

Dismantling of posts or struts(wood, steel or RCC) any section embadded in concrete, including taking out embedded portion and making good disturbed ground all as specified and directed.

S&F 10mm dia MS Round bars as in support of Chain Link Fencing all as specified.

Supply only chain link MS galvanized fencing of any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire

S & F mild steel bolt screwed one end with hexagonal or square nuts & washers the other end enlarged not exc 15cm long dia of neck 12mm complete all as specified and directed.

M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L for Providing high prestress precast ce- ment concrete Type M-25 in columns, posts, boundary pillars, with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in cement mortar 1:6 complete with joints to match as directed by Engr in charge. (Note: The quoted rate shall be inclusive of cost of high tensile carbonized steel wire dia 3 to 4mm reinforcement , Form work) MAKE :UNiversal or any Equivalent

S&F for 50 mm thick prestress precast cement concrete M-25 using compound wall (both Side smmoth Finish), planks/panels locking each other louvres and jallies as per approved design/patterns Set in cement mortar1:4 , (measured solid ), including all mouldings but excluding frame as directed by Engr in charge. (Note: The quoted rate shall be inclusive of cost of high tensile carbonized steel wire dia 3 to 4mm reinforcement , Form work) (Note:columns/ poles will be measured seperately) MAKE :UNiversal or any Equivalent

M & L for RCC 1:2:4, type B-1, (using 20mm graded stone aggregates) as in precast fencing posts, stuts etc area exc 100 & not exc 250Sqcm including form work etc complete all as specified:- (Reinforcement including in quoted rates. No extra payment shall be made.)

S&F for 40 to 50 mm thick precast cement concrete compound wall , planks/panels locking each other louvres and jallies as per approved design/patterns.Set in cement mortar 1:4 ,(measured solid ), including all mouldings but excluding frame as directed by Engr in charge. (Note: The quoted rate shall be inclusive of cost of reinforcement , Form work) (Note:columns/ poles will be measured seperately)

Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed

M&L PCC 1:4:8 type D2 using 40mm grade stone aggregate as in foundation & mass concrete etc complete all as specified and directed.

M&L PCC 1:2:4 type B0 using 12.5mm grade stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges all as specified and directed.

S&L machine pressed precast concrete interlocking paver block rubber moulded, any shape and size confirming ti IS-15658-2006 of 80mm thickness grey cement and with pigment , M-35 grade including 30mm thick Sand filling to under interlocking tiles complete all as specified and directed.

S&L machine pressed precast concrete interlocking paver block rubber moulded, any shape and size confirming ti IS-15658-2006 of 60mm thickness grey cement and with pigment , M-35 grade including 30mm thick Sand filling to under interlocking tiles complete all as specified and directed.

M & L for prepolished chequered cement concrete tiles 30cm x 30cm x 25mm thick Rubber moulded with grey cement and pigment, including 15mm thick screed in CM 1:6, set jointed & pointed in neat cement slurry in floors complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed trusses complete all as specified and directed.

S&F Marble pillar (whrite or coloured) of size 125mmx125mmx600mm to be used in railing , design all as directed by Engr-incharge .

S&F coping of marble to be fixed on above or bottom of marble pillar ,coping of minimum thicknes 40mm and width of coping to be minimum of 175mm to be fixed.Rates will be including rounding of coping all as per directed by Engr-incharge

Supply and fix for framed work as in doors or gates of angle or other section with gusset Plate, rails,braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges and door fittings necessary rivetting/welding cutting up complete steel conf. toFe 410-W (Gde- E- 250) quality- A all as specified and directed. Note : Distrubed surfaces of wall shall be made good to true surface.

Taking down unserviceable copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, socket outlets, ceiling roses, pendent brackets, holders etc.removing marerialso storeforeeping in safe custody or for taking credt and making good disturbed surfaces of walls, floor etc.complete all as directed.

Material and labour for point wiring with two runs of stranded copper conductor PVC insulated unsheathed 1.5 Sqmm FRLSH cable in and including PVC casing caping of suitable size with PVC boards of appropriate sizes and all requisite accessories complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core continuous 1.5 Sqmm,FRLSH copper cable for earth wire complete all as specified and as directed for One light/Fan point controlled by one switch.

All as per Item No-130 but One light point controlled by two two way switches.

All as per Item No-130 but One 3 pin socket outlet 5 Amps on the same board.

All as per Item No-130 but One 3 pin socket outlet. 5 Amps on the independent board

All as per Item No-130 but One bell point controlled by one switch

One 15 A socket outlet independent with 2.5 sq mm PVC cable and 2.5 sqmm cable as earth continuity wire.

One 15 A socket outlet on the same board with 2.5 sq mm PVC cable and 2.5 sqmm cable as earth continuity wire.

M&L point wiring with PVC insulated FRLSH 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including nonmetalic rigid new PVC conduit medium grade ISI Marked not less than 20 mm dia of conduit, terminal box of 1.6 mm thick and 3 mm thick hylam sheet cover for terminal boxes also including porvision of earth wire PVC insulated FRLSH 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly the following :

(a) One light/fan/bell point controlled by one by one way switch.

(b) -ditto- as above item No131 but One 3 pin socket outlet 5 hole 5 Amp independent board socket & switches to be measured and paid separately.

(c) -ditto- as above item No131 but Same board.

-ditto- as above one power point with insulated stranded copper conductor cable 2.5 Sqmm single core for 3 pin 15 Amp switch socket and PVC insulated FRLSH 1100 Volts unsheathed copper conductor 2.5 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, stranded conductor as earth wire connected to dolly complete.

Supply and fix in repair switch piano flush type single pole one way 6 Amps complete all as specifed .

Supply and fix in repair switch piano flush type single pole two way 6 Amps complete all as specified .

Supply and fix in repair Bell push button 5 Amp, flush type complete all as specified .

Supply and fix in repair Bell, Ding Dong electric AC 230 Volts single pole complete all as specified and as directed.

M & L in repair for switch socket combination 3 pin 6 Amps flush type (multi purpose ) complete all as specified and as directed.

M & L in repair for switch socket combination 2 in 1, 3 pin, 5 and 15 amp flush type universal complete all as specified and as directed.

M & L in repair for ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed.

S&Fin repair electronic step type Fan regulator flush type (speed regulation in 5 steps) 120 watts complete all as specified and as directed.

S & F in repair lamp holder PVC/ Poly carbonate, angle/batten Bakelite complete all as specified and directed.

S&F in repair wall mounted LED Light fittings, 4 feet long, with 18 W LED tube rod and box type batten double side connection type complete all as specified and directed.

S&F in repair wall mounted LED Light fittings, 2 feet long, 9 W, polycarboate housing and integrated electronic driver complete all as specified and as directed.

S&F in repair Decorative wall light fixture, madeup of polycarbonate and incl with 10 Watt LED lamp (B22 base)all as specified and directed .

S&F in replacement Post top, (Coral Opal) landscape luminare with high power LED 25 W making arrangement for fixing light fittings on pole/stand post/pillar with GI pipe all as specified and directed

Suuply and fix in repair new sheet metal enclosure for DB'S when MCBs to e used Triple pole and neutral 4 way double door complete all as specified and directed.

Supply & fix in repair factory made epoxy powder coated Distribution Board TPN-4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN- MCCB 125/160 Amp 415V 16KA as incomer and 40 to 63 Amp SP 230V MCBs outgoing complete all as specified and conforming to IS : 8623.

M&L in replacement MCCB 125 Amps, 16 KA , 4P, 415V complete.

Supply and fix in repair MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.

Supply and fix in repair MCB DB SPN 4 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.

Supply and fix in repair MCB triple pole and neutral 415 V 63 Amps complete all as specified and directed. .Make : L&TBB4060B

Supply and fix in repair MCB SPN 32 to 63 Amps, 240 volts complete all as specified and as directed.Make : L&T BB20400B

Supply and fix in repair MCB SP 6 to 32 Amps, 240 volts complete all as specified and as directed.Make : L&T BB10320B

M & L in repair sub main wiring with 2 single core, 6 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FRLSH cable 1100 Volts grade including 6 Sqmm PVC insulated unsheathed multi stranded copper conductor FRLSH as continuous earth wire drawn through Casing caping and connecting to common earth terminals complete all as specified and directed. Note :- (i) Two runs of copper cable and one run of earth wire including conduit /PVC casing/caping shall be measured as one length.

All as per item No - 153 above but with 2 runs of 4 Sqmm cable with one run of 4 Sqmm cable for earthing.

All as per item No - 153 above but with 2 runs of 2.5 Sqmm cable with one run of 2.5 Sqmm cable for earthing.

Earthing complete in replacement with galvanized mild steel earth plate electrode size 600x600x6mm thick buried directly in ground (Preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 1.5 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 part-I, connected to test point complete, all as specified and testing on completion.

M& L in repair Modular type switch, 1 way,6 Amps, 1 module

M& L in repair Modular type socket, 2 & 3 pin combined, 6 Amps, 2 module

M& L in repair Modular type switch, 1 way, 16 Amps, 1 module

M& L in repair Modular type socket, 3 pin, 6 Amps / 16 Amps combined, 2 module

M& L in repair Electronic step regulator (Modular type) (speed regulation in 5 steps) suitable for ceiling fan 1200 / 1400 mm sweep 120 watts

Note: Amount of sch of credit of Rs.64371.50/-will be deducted from total amount of BOQ.

M/S YOGESH CONSTRUCTION (BID ID -3319803)

M/S MANISH CONSTRUCTION CO (BID ID -3327236)

Alpha Construction (BID ID -3327638)

M/S SAMEER SUBHASH PATANI (BID ID -3320132)

J Sams Contructions (BID ID -3327427)