Renovation of E and F Type Quarter Under Irrigation division Laxmipur jamui

B.O.Q. for Renovation of E and F Type Quarter Under Irrigation division Laxmipur jamui.

(i) Estimated Cost (in Rs.) RS. 1348857.00

(ii) Amount of B.O.Q (inRs.) RS. 1346357.00

(iii) Cost of B.O.Q(in Rs.) RS. 2500.000

(iv) Earnest Money (in Rs.) RS. 27000.00

ITEM NO. ITEM OF WORK UNIT TOTAL QUANTITY RATE AMOUNT

DISMANTLING WORK

1 Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material withing 50 metres lead. m3 0.49 1737.3 850.20

2 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. m2 360.14 26.30 9471.68

3 Desmantiling doors windows and clerestory windows (steel or wood) shutters including chowkhats, architrage, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sqm and below. m2 20.53 191.1 3923.28

4 Demolishing brick work including stacking of serviceable material and disposal of unserviceable material within 50 meters lead:In cement mortar. m3 4.65 1015.20 4720.68

5 Demolishing cement concrete including disposal of material within 50 metre lead.1:3;6 or richarmix. m3 3.44 1195.00 4108.00

6 Removing white-or colour wash by scrapping and .sand paperin and preparing the surface smooth including necessary repair scratches etc. complete Details of cost for 10 sqm. M2 424.33 9.1 3861.40

FOUNDATION WORK

7 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. m³ 4.57 293.40 1340.84

8 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l. m² 53.81 303.40 16326.00

9 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.(1:2:4),. m³ 14.14 5565.80 78673.50

10 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-All work upto plinth level 1:1.5:3 (1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) . m3 3.27 6298.70 20596.40

11 Centring and shuttering including strutting,propping etc. and removal of form for.Suspended floors, roots, landings, balcnies and access platform. m2 48.75 457.00 22278.8

12 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

13 Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1 .:4 (1 cement: 4 coarse sand ) m³ 8.29 5583.40 46286.4

14 12 mm cement plaster of mix 1:4(1 cement :4 coarse sand) m² 420.60 189.20 79578.2

15 6mm plaster to cealing of mix 1:3(1 cement: 3 coarse sand. m² 126.01 151.90 19141.10

16 net cement punning m2 141.89 49.20 6980.99

ROOF MAINTENCE WORK

17 Providing and laying in situ five course water proofing treatment with glass fibre tissue reinforced bitumen over roof consisting of first coat of bitumen primer @ 0.40 kg. per sqm, 2nd & 4th courses of bonding material© 1.60 kg. per sqm which shall consist of blown type bitumen of grade 85/25 conforming to IS: 702, third layer of glass ffibre tissuue course as specified, fifth, the top most layer of stone grit 6 mm and down size or pea-sized gravel sprad @ 6 dm3 per sqm including • preparation of surface excluding grading for slope etc. complete. m2 203.33 407.7 82869.90

FITTING WORK DOOR & WINDOW

18 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).LOCAL wood. m³ 0.443 51946.20 23044.60

19 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S.pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin-charge.30 mm thick . m² 15.97 1790.30 28591.09

20 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (overall area of door shutter to be measured) m² 1.11 362.60 402.48

21 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :250x16 mm. each 7.00 165.90 1161.30

22 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete250x10 mm . each 20.00 62.90 1258.00

23 Providing and fixing ISI marked oxidised M.S. handles conforming to IS :4992 with necessary screws etc. complete:125 mm. each 27.00 29.41 794.1

24 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper. each 8.00 84.50 676.00

25 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm daimeter bolts ,nuts and wooden plugs and embedding in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement:3 coarse sand :6 graded stone aggregate 20 mm nominal size ) each 48.00 148.90 7147.20

26 Providing and fixing ISI marked ,IS:1341, MS heavy weight butt hings with necessary screws etc. complete.

27 Providing and fixing nickel plated M.S pipe curtain rods with nickel plated brackets.

20mm dia ( heavy type ) m 20.57 120.30 2474.6

28 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc . kg 342.234 140.00 47912.8

29 Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm,made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. m 29.07 461.40 13412.90

30 Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S.frame shall have a coat of steel primers of approved make and manufacture . M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick,95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing.(9.120) M2 8.27 2051.90 16969.21

31 Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3mm MS gusset plates at the junction and corners.all necessary fittings complete.including applying a priming coat of approved steel primer. Using M.S. angle 40x40x6 mm for diagonal braces (10.7) M2 6.30 3453.40 21756.42

FLOORING WORK 0.00

32 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. m² 16.630 832.00 13835.33

33 Providing and laying vitrifed floor tiles in different sizes {thicknessto be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete. Size of Tile 60x60 cm m² 4.76 1781.10 8478.04

34 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. m² 4.7816 3364.30 16086.7

35 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. m² 913.72 111.00 101422.9

36 Applying one coat of cement primer of approved brand and manufacture on wall surface:Distemper primer . m² 913.72 45.00 41117.40

37 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade New work (three or more coats). m² 913.72 91.00 83148.40

38 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade , New wood work (two or more coats). m² 26.33 89.10 2346.00

39 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade:New steel work (two or more coats). m2 29.12 93.40 2719.50

SANITARY FITTING ITEMS

40 Providing and placing on terrace (at all floor levels ) polyethylene water storage tank ISI:12701 marked with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. ltr 1000.00 8.40 8400.00

41 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.50 mm nominal outer dia Pipes . m 70.00 203.20 14224.00

42 Providing and fixing brass bib cock of approved quality :20 mm nominal bore. each 13.00 284.70 3701.10

43 Providing and fixing brass stop cock of approved quality 20 mm nominal bore . each 5.00 284.70 1423.50

44 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 75 mm diameter. m 15.00 157.10 2356.50

45 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

(a)Single tee without door (75*75*75mm) each 5.00 107.80 539.00

(c)75 mm couplar. each 8.00 69.30 554.40

46 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. each 3.00 4514.90 13544.70

47 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required :510x1040 mm bowl depth 225 mm. each 3.00 6568.30 19704.90

48 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.32 mm dia . each 16.00 90.60 1449.60

49 Providing and fixing wash basin with C.I brackets ,15 mm C.P brass pillar taps, 32 mm C.P brass waste of standard pattern ,including painting of fitting and brackets, cutting and making good the walls wherever require .

white vitreous china wash basin size 630 x 450 mm with a pair of 15 mm C.P brass pillar taps. each 2.00 2696.90 5393.80

50 Wiring for circuit/submain wiring along with earth wire with the following size of FR PVC insulated copper conducter SC cable in surface / recessed medium class PVC conduit as required.

a> 2 X 1.5 sq mm+1X1.5 sq mm earth wire (For CW) each 6.00 201 1206.00

51 supplying and drawing following sizes of FR PVC insulated copper conductor, single cable in the existing surface / recessed PVC conduit as required. m 419.00 38 15922.00

52 supplying and fixing of following size of medium class pvc conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required. m 174.00 139 24186.00

53 Supplying and fixing stepped type electronic fan regulator on the existing modular plate/ switch box including connections but excluding modular plate etc. as required

Electronic Fan Regulator Modular Type each 5.00 358 1790.00

54 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. each 13.00 414 5382.00

55 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. each 16.00 531 8496.00

56 Supplying and fixing 2 pin, 6 amps ceiling rose on the existing junction box / wooden block including connection etc as required. each 39.00 64 2496.00

57 Supplying and fixing batten/angle holder including connection etc as required(1.34) each 30.00 80 2400.00

58 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length ( upto 30 cm ) with 1.5 sq. mm FR PVC insulated, copper conductor , single core cable including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. each 5.00 203 1015.00

59 Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 220 volts, on surface/ recess, complete with tinned copper busbar , neutral busbar , earth bar , din bar , interconnections, powder painted including earthing etc. as required .(but without MCB/RCCB/Isolator).

b> 2+12 way double door horizontal type(IB). each 3.00 2314 6942.00

60 S/F following rating, 240/415 volts, 'C' curve circuit breaket suitable for including loads of following poles in the existing MCB DB complete with connections, testing and commossioning etc.

a> 6/32 amps, single pole each 2.00 237 474.00

61 S/F of 32 mm x 2 metre long G.I. pipe ( medium class ) bracket for mounting of fluorescent /HPMV/ HPSV/CFL street light fitting on pole including bending the pipe to the reqd. shape 2 nos. 40 mm x3 mm flat iron clamps with nuts, bolts and washer painting the flat iron with primer and finish paint etc. as reqd. per set 6.00 1038 6228.00

62 Supply & installation of regular/standard model A.C. Ceiling fan of 1200 mm sweep including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm fr pvc insulated copper conductor etc. As reqd. each 5.00 2482 12410.00

63 Supply and installation of 380 mm, 230 v A.C. exhaust fan in the existing opening including making good the damage, connection testing, commissioning etc as required. each 3.00 5560 16680.00

64 Carriage of construction materials from source to work site

A Coarse Sand Cum 18.87 625.75 11810.1

B Stone Chips Cum 15.36 2974.86 45693.2

C Cement MT 9.97 455.5 4541.8

F Local Sand Cum 5.38 238.10 1281.00

SUB TOTAL A 1122916.6

ADD LABOUR CESS @ 1% OF WORK 11229.2

Add S. Fee 6835.0

SUB TOTAL B 1140980.8

ADD GST 18% 205376.5

Grand Total 1346357.3

IRRIGATION SUB DIV-03 IRRIGATION SUB DIV-03 IRRIGATION DIVISION

LAXMIPUR LAXMIPUR LAXMIPUR

Name of Work Renovation of E and F Type Quarter Under Irrigation division Laxmipur jamui Cost of Work as per BOQ ₹1346357.00 Time of Completion 2 Month

Sl No. Items Requirement

Name of the contractor

Address of the contractor

1 Earnest Money As per NIT duly pledged in favour of Executive Engineer, Irrigation Division, Laxmipur, Jamui (Pay either online or Physical mode only)

Bid Security Amount - ₹27000.00 Bid Security Amount (in ₹)

2 Time of Completion

3 Registration No.

4 CHARACTER CERTIFICATE

5 Affidavit in required format (Should be after the publication date of the tender) as per letter no. 686 dated 19.08.2014)