Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.0 LAccepted-AOC | L1 | Accepted-AOC RATES ARE FOUND REASONABLE AND THE FIRM BEING L1 BIDDER | |
| 2 | L2₹10.1 L+₹11,484 (1.15%)Rejected-Finance | L2 | Rejected-Finance BEING L2 BIDDER | |
| 3 | L3₹10.2 L+₹22,042 (2.21%)Rejected-Finance | L3 | Rejected-Finance BEING L3 BIDDER | |
| 4 | L4₹10.4 L+₹39,860 (4.00%)Rejected-Finance | L4 | Rejected-Finance BEING L4 BIDDER | |
| 5 | L5₹10.6 L+₹58,645 (5.88%)Rejected-Finance | L5 | Rejected-Finance BEING L5 BIDDER |
Tender Value
₹9.2 L
EMD Value
₹18,400
Closing Date
19 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I DARJEELING
AGE I DARJEELING JALAPAHAR CANT DIST - DARJEELING
PERIODICAL SERVICES AT MD ACCN AND OTM OF INF UNIT AT LEBONG UNDER AGE I DAR
2023_MES_599763_1
9066/E8
Open Tender
Civil Works
Item Rate
180 days
LEBONG
AS PER NIT
7 documents required · 7 mandatory
₹500
AGE I DARJEELING
₹18,400
Yes
22 Jun 2023
31 May 2023
21 Jun 2023
31 May 2023
19 Jun 2023
14 Jun 2023
Amount
M&L for preparation of old decorated plastered or unplastered surfaces of walls including brooming down or steel wire brushing, scrapping down smoke scoot, mould, moss and efflorescent salt, trading oil and greasy spots and applying one coat of distemper oil emulsion of any tint, complete as specified and as directed by Engineer-in-charge.
M&L for complete removal of existing treatement on plastered or unplastered surfaces of walls including brooming down or steel wire brushing, scrapping down smoke scoot, mould, moss and efflorescent salt, trading oil and greasy spots and applying two coat of distemper oil emulsion, complete as specified and as directed by Engineer-in-charge.
M&L for complete removal of existing treatement on plastered or unplastered surfaces of walls including brooming down or steel wire brushing, scrapping down smoke scoot, mould, moss and efflorescent salt, trading oil and greasy spots and applying one coat of distemper oil emulsion paint over a 1 mm thick wall putty over a coat of primer, complete as specified and as directed by Engineer-in-charge.
All as per serial item No 01 but on ceiling.
All as per serial item No 01 but on ceiling over 1 mm thick wall putty and primer.
M&L for preparation of old decorated plastered or unplastered surfaces of walls including brooming down or steel wire brushing, scrapping down smoke scoot, mould, moss and efflorescent salt, trading oil and greasy spots and applying one coat of cement base paint on old decorated wall surfaces over a coat of alkali resistance primer, complete as specified and as directed by Engineer-in-charge.
All as per serial item No 06 but applying two coat of cement base paint on old decorated wall surfaces over a coat of alkali resistance primer.
M&L for complete removal of existing treatement on plastered or unplastered surfaces of walls including brooming down or steel wire brushing, scrapping down smoke scoot, mould, moss and efflorescent salt, trading oil and greasy spots and applying for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm, complete as specified and as directed by Engineer-in-charge.
M&L for preparation of old decorated plastered or unplastered surfaces of walls including brooming down or steel wire brushing, scrapping down smoke scoot, mould, moss and efflorescent salt, trading oil and greasy spots and applying two coat of white wash, complete as specified and as directed by Engineer-in-charge.
All as per serial item No 09 but on ceiling.
Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed by Engineer-in-charge.
M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surface including finishing even and smooth without using extra cement, complete all as specified and as directed by Engineer-in-charge.
M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface including finishing even and smooth without using extra cement, mixing with water proofing compound @ 3% by weight of cement consumed, complete all as specified and as directed by Engineer-in-charge.
M&L for rendering 5 mm thick in cement mortar 1:3 on ceiling surface including finishing even and smooth without using extra cement, complete all as specified and as directed by Engineer-in-charge.
Supply only integral water proofing compound confirming to IS complete all as per specified and as directed by Engineer-in-charge.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of chalk whitening primer and 1 mm thick wall putty, complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of new plastered or unplastered surfaces of ceiling and applying one coat of distemper oil emulsion over one coat of chalk whitening primer coat of chalk whitening primer and 1 mm thick putty on ceiling surface, complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer, complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of old decorated wooden surfaces of any description over 10cm width or girth & applying one coat of synthetic enamel paint of any tint, complete all as specified and as directed by Engineer-in-charge.
All as per serial item No 19 but as on steel surfaces.
M&L for preparation of old decorated wooden surfaces of any description over 10cm width or girth & applying two coats of synthetic enamel paint of any tint, complete all as specified and as directed by Engineer-in-charge.
All as per serial item No 21 but as on steel surfaces.
M&L for preparation of old decorated plastered surfaces of wall by vaccum based sanding machine, removal of nails etc & filling cracks/hole with putty, applying wall care putty upto 1mm thick as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying one coat of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre / 10 sqm over by using auto roller and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over prepared surfaces, complete all as specified and as directed by Engineer-in-charge. Note:- Acrylic emulsion paint/emulsion distemper/plastic emulsion paint, painting methodology using preparation of old decorated plastered surfaces of wall shall be carried out through Vaccum based sanding machine for scraping etc after preparation of surface wall care putty upto 1mm thick as required shall be carried out as specified under schedule A notes of SSR part-I (multipurpose mixer shall be used for uniform and proper mixing of putty) then one coat of primer same make of paint and base shall be provided on wall/ceiling by normal manner as mentioned in SSR part-I finally the Acrylic emulsion paint/emulsion paint/emulsion distemper/plastic emulsion paint through Air less spray by using auto roller shall be carried out. Make of tools shall be one of the BERGER/ASIAN/TECHNO COMMERCIAL equivalent shall be used as approved by Engineer-in-charge. All work shall be carried out through approved applicator of manufacturer of paint only.
M&L for complete removal of existing treatment from old decorated plastered surfaces of wall by vaccum based sanding machine, removal of nails etc & filling cracks/hole with putty, applying wall care putty upto 1mm thick as required (Multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of emulsion distemper (white or coloured) by using auto-roller complete all as specified and directed as per manufacturer's instructions. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ.
Darjeeling Enterprises
JALAPAHAR HARDWARE
RAI CONSTRUCTION
HIRA SINGH
SANJAY KAUSHIK
KWOK YING CHIU
Damdoo Bhutia
M/S TSHERING BHUTIA
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .