ADDN ALTN TO BUILDING NO P 16 DSC LINE AT AF STATION SINGARSI UNDER AGE I AF SINGARSI

Amount

Part-I:- Site clearance,Earthwork,Demolition,Dismantling and Taking down

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out for hard and dence soil complete all as specified and as directed.

Returning filling including Spreading and leveling with excavated earth including watering and well ramming in layers n,exc 25cm thick complete all as specified and as directed.

Removing excavated soil to a distance not exc 50m and depositing where directed at a level n. exc 1.50m above the starting point and complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but notbacking), removing serviceable tiles to store and rubbish off the premises all as specified and directed by Engr-in-Charge

Demolition of stone slabs and tiles of any description or thickness in floors, aprons all as specified and directed

Demolition of reinforced cement concrete in any position (reinforcement cut as required to facilitate demolition) and removing rubbish to a distance 50m at low lying area complete all as specified and directed.

Demolition of cement concrete(un-reinforced) of any description and in any position as direcetd by Engr-in-Charge and removing rubbish to a distance n.exc 50m at low lying area complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls, Chajjas etc., including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed.

Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

Taking up or down steel tubing pipe of any size with connections for cleaning for refixing or removing or storeyard complete all as specified and directed.

Taking down chowkats or frames with shutters of any size (without taking off shutters from the frames) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and as directed.

Part-II:- B/R Work

M&L for coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L Glazed ceramic coloured designer seamless tiles 450X300X7 mm thick on vertical surface as in skirting, dado set and jointed with neat cement slurry and pointed in white or coloured cement to match with the surface over and including 10mm thick screed in CM 1:3 complete all as specified and as directed.

M&L Vitrified tiles light shade 09-10mm thick double charged (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including screed bed 20mm thick in CM 1:6 complete all as specified and as directed.

M&L Vitrified tiles light shade 09-10mm thick double chared (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, as on vertical surfaces etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including 10mm thick screed in CM 1:3 complete all as specified and as directed.

Note for item no. 1.15 to 1.18: a. The contractor shall purchase 1st Quality tiles from approved make. B. The contractor shall submit purchase voucher of all thhe tiles, non-submission may lead to non-payment. The Engr-in-Charge shall verify and deface the voucher before RAR/Final bill Payment.

M&L for Machine cut kota stone slab flooring 16 to18mm thick over and including 20mm cement screed base laid in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed .

M & L Granite of 16 to 18mm thick(of any type) work (table rubbed and polished in slab top, steps, jambs, pillars, window-cills, cooking platform sand like in over and including cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to matchwith shade of granite including chemfering and rounding the edges complete all as specified and directed.

M&L for Makrana white Marble work 16 to 18mm thick (table rubbed and polished) in floors steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.

M&L PCC 1:4:8 type D2 ( 40 mm graded aggreage ) as in foundation/sub base complete all as specified and as directed.

M&L for RCC (nominal mix) Type A1(1:1.5:3) (using 20mm gradded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L reinforced cement concrete nominal mix Type A1(1:1.5:3) using 20 mm graded stone aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for RCC (nominal mix) Type A1(1:1.5:3) (using 20mm gradded stone aggregate) as in beams and lintels above1.50m clear span etc complete all as specified and directed.

Formwork to sides of concrete foundations, footing ,bases of colums, plinth beams rough finished surfaces and similar work complete all as specified and as directed.

Formwork to side and soffits of floor or roof beams,lintels etc flat for fair finished surfaces complete all as specified and directed.

Use and waste for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

S&F mild steel TMT (Fe 500D and above) bars of any dia , cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends,stirrups, spacers and binders including binding with mild steel wire not less than 0.9mm dia or securing with clip. complete all as specified and directed.

M &L for brick work with sub class 'B' old size bricks, straight or curved on plan exc 6m mean radius built in cm 1:6 complete all as specified and directed.

M &L for brick work with sub class 'B' old size bricks straight or curved on plan to any radius in half brick thick walls built in cm 1:4 complete all as specified and directed.

Material & Labour for 15mm thick rendering in Cement Mortar 1:6 on stone masonry surfaces, finished even and smooth without using any extra cement complete all as specified and as directed.

Material & Labour for 15mm thick rendering in Cement Mortar 1:6 on brick work or concrete surfaces, finished even and smooth without using any extra cement complete all as specified and as directed.

Material & Labour for 15mm thick rendering in two layer each of (10+5mm) thick Cement Mortar 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing with water proofing compound finished even and smooth without using any extra cement complete all as specified and directed. Note- a. Water proofing compound measured seperately b. The quantity of WPC shall be as per manufacture instruction's. The Engr-in-Charge shal calculate the quantity of WPC and sign the same at the time of payment.

Supply only approved Liquid integral water proofing compound.

M&L Rendering 10mm thick in CM 1:3 on fair faces of concrete surface of ceiling, finished even and smooth without using extra cement , all as directed by Engineer-in-Charge.

M&L Preparing new plastered surfaces of ceiling and applying two coats of white wash complete all as specified.(Note: quoted rates shall include cost of necessary scaffolding).

M & L for Preparation of old plastered or unplastered surfaces of ceiling including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes and filling cracks with chalk whiting, and brooming to remove all dirt etc and applying one coat of white wash on old prepared surfaces of ceiling complete all as specified and directed by Engineer-in-Charge.(Note: quoted rates shall include cost of necessary scaffolding).

M & L for Complete removal of existing treatment of ceiling including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes with , filling cracks with white putty inclusing brooming to remove all dirt etc and applying two coats of distemper over and including one coat of alkali resistant primer over and including 1mm(avg) thick wall care putty complete all as specified and as directed.(Note: quoted rates shall include cost of necessary scaffolding).

M&L for preparation of newly plastered wall surfaces and applying two coats of Oil bound distemper over and including a coat of alkali resistant primer overand including 1 mm (avg) thick wall care putty complete all as specified and as directed.(Note: quoted rates shall include cost of necessary scaffolding).

M & L for Complete removal of existing treatment of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes with , filling cracks with white putty inclusing brooming to remove all dirt etc and applying two coats of distemper over and including one coat of alkali resistant primer over and including 1mm(avg) thick wall care putty complete all as specified and as directed.(Note: quoted rates shall include cost of necessary scaffolding).

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) in comouflage pattern with silicon additives over and including priming coat of exterior primer applied over new surfaces including preparation of surface complete all as specified and as directed. Note: a. Quoted rates shall include cost of necessary scaffolding. B. The contractor shall submit purchase vouchers. Non-submission may lead to non-payment. The Engr-in-Charge shall verify and deface the voucher before RAR/Final bill Payment.

M & L Preparation of old wood and wooden based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint etc complete all as specified and as directed..

M & L Preparation of old steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and as directed.

M&L for preparation of existing surface of wall and applying one coat of Premium Acrylic Smooth exterior paint in Camouflage pattern as directed by Engr-in-charge and including all necessary scaffolding, complete all as specified and directed. Note: a. Quoted rates shall include cost of necessary scaffolding. B. The contractor shall submit purchase vouchers. Non-submission may lead to non-payment. The Engr-in-Charge shall verify and deface the voucher before RAR/Final bill Payment.

S&F in repairs PVC valve less syphonic action type flushing cistern low level white, single lever type flush flush, ISI marked (IS: 7231) with PVC inlet ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including P or S trap (excluding flushing cistern and flush pipe) complete all as specified and directed

S&F in repairs Vitreous china water closet pan ( pedestal pattern), white including fixing bolts etc including plastic water closet seat, black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed

S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, magnum urinal spreader, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe complete all as specified and directed

S&F in repairs Vitreous China Wash hand basin white Oval shape, size 550 mm x 400 mm size, excluding taps, chain & plug & porcelain stopper but incl brackets, 40/32 mm dia chromium plate coupling 32 mm dia, cutting for and pinning ends of brackets or erecting stand complete all as specified and directed

S&F in repair Fancy type pillar taps, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed as in repair complete all as specified and directed

S&F in repair fancy type 15mm bore, chromium plated bib taps cast copper alloy with crutch or butterfly handle screwed down for iron pipe complete all as specified and directed

S&F in repair Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union alongwith arm 225mm and flange complete all as specified and directed

S&F in repair fancy type 15mm bore dia of conceled stop valves cast copper alloy screwed down high presure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S&F in repairs fancy type chromium plated 15 mm bore stop valve/angle cock cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed

S&F in repairs tubular towel rail brass chromium plated , 20mm dia, 60cm long between flanges in repairs complete all as specified and directed

S&F in repairs PVC (SWR) floor trap 75 mm, plain with CP grating including joining and solvent cement complete all as specified and directed

S&F in repair HDPE pipes of pressure rating 6kgf/sqcm of 32mm bore for outlet pipe of WHB complete all as specified and directed

S&F in repairs CP soap dish complete all as directed

S&F in repairs Sheet glass shelf/corner shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F PVC (SWR) pipes single socketed 110mm bore dia in any lenth with rubber ring jointeds, laid in trenches or in floors.

S&F PVC (SWR) pipes single socketed 75mm bore dia in any lenth with rubber ring jointeds, laid in trenches or in floors.

S&F PVC (SWR) 110mm dia bend any radius all as specified and directed.

S&F PVC (SWR) 75mm dia bend any radius all as specified and directed.

Cutting chases,pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps cills, sunshades, shelves,lintels etc; and cutting chases for concealed water tubing and making good, cutting not exc.10cm girth complete all as specified and directed

S&F Steel water tubing medium grade galvanised of nominal bore 15mm (ISI marked)with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed

S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs,unions etc.) of nominal bore 20mm (ISI marked) complete all as specified and directed

S&F of Pressed steel frames 105 x 60 mm size for doors with one or more rebates including necessary fixing lugs, hinges, lock striking plate etc. complete all as specified and directed

S&F of Pressed steel frames 125 x 60 mm size for doors with one or more rebates including necessary fixing lugs, hinges, lock striking plate etc. complete all as specified and directed

M& L for Plain Cement Concrete (1:3:6) Type C-1 using 20mm graded stone aggegate as in hold fast block, copping, filling in hollow door frame, bedblock, etc.

S & F solid PVC door frame of size 50 x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, in opening

S&F factory made solid PVC moulded door designer veneered colour shutter 30 mm thick comprising of With 30mm thick Wood free EPS in centre core, with 2,4 or 6 raised panel design with 2 mm thick moulded prelam PVC sheet on both face all as specified and directed by Engr-in-Charge

S&F factory made solid PVC moulded door designer veneered colour shutter 30 mm thick comprising of 30 mm thick solid particle board core in centre core, with 2,4 or 6 raised panel design with 2 mm thick moulded prelam PVC sheet on both face all as specified and directed by Engr-in-Charge

S&F Factory made solid panel wire guage PVC door shutter in three panel 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling wii be wire guage. The wire guage shall be wrappedon an additional square 8 mm MS solid tube.This tube shall be welded to MS tube. The wire guage shall be stretched to tighten firmly, suppling & fixing in the frame at site as per specification & drawing

BLANK

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) aluminium work doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. all complete all as specified and directed Note:- a. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws. b. The weight of handle shall be measered and paid, however, hinges as required shall be paid seperatly

S&F of Stainless steel hinges type B-21 100mm long complete all as specified

Blank

S&F powder coated aluminium grill of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engg-in-Charge

S&F Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed

Providing and fixing in repair double action hydraulic floor spring With stainless steel cover plate minimum 1.25 mm thickness of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n,exc 0.50 Sqm in each pane complete all as directed.

S&F for stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture and fixed with stainless steel wire staples complete all as specified and directed.

S&F lnsulated PVC Wall Lining wooden finish consisting of 12mm thick PVC Insulated Panels having expanded polystyrene (EPS) stuck to 3-4 mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing for cupboard and shelving/shutter complete all as specified and directed.

M& L steel ventilator with top hung shutter including hinges steel peg stay , complete all as specified and directed.

S&F MS butt hinges 100mm size, medium weight cold rolled mild steel complete all as directed.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :200x10 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :150x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed.

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to beprepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete. Conforming to ( Fe-290 (Gde E-165))

M&L preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described and apply two coats of approved shed of synthetic enamel paints over and including a coat of red oxide zinc chrome primer

M & L for 50mm thick cement concrete (1:3:6) type C-1 ( using 20mm graded agg.) as in floor finishing/Plinth protection cement concrete with necessary formwork all as specified and diredted.

M & L for PCC type B0 1:2:4 (12.5 mm Graded stone aggregate) as in roof padding,chajja repair complete all as specified and as directed by Engineer-in-Charge.

M&L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and diredted

M&L for Preparation of old plastered or unplastered surfaces of walls including Cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes , filling cracks with birla white putty and brooming to remove all dirt etc and applying one coat of white wash on old prepared surfaces of walls complete all as specified and directed

S&F repair tubular Stainless steel SS grade 304 , curtain rod 20 mm dia having wall thickness of 1.20mm decorative curtain rod fixing with brackets complete all as specified.

S&F repair fancy type powder coated decorative curtain rod two fixing brackets and two no funnels for curtain rod complete all as specified.

Part-III:- E/M Work

M&L for point wiring for one light/fan/bell point with single core PVC insulated and unsheathed stranded FRLS copper conductor cable 1100 volts grade size 1.5 Sqmm (nominal area) and including PVC casing capping 40/25/20 mm width & its accessories required at site with one single core PVC insulated unsheathed 1.5 Sqmm (nominal area) stranded FRLS copper conductor as earth continuity wire and connected to earth dolly including PVC switch board on existing wall surface for one light/fan point /bell point controlled by one number one way switch & making good the disturbed surface to match with existing surface/wall complete all as specified and as directed.

All as per Item No108 here-in-before but for one 5 pin socket outlet 5 Amps on independent board with 1.5 Sqmm complete all as specified and as directed.

All as per Item No 108 here-in-before but One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 sq. mm size all as specified and as directed.

S&F of switch piano flush type 6 Amp single pole one way complete all as specified and as directed.

S&F of socket flush type 6 Amp single pole one way on same board complete all as specified and as directed.

S&F of switch socket combination 5 Pin 6 Amp universal complete all as specified and as directed.

S&F for switch socket combination 5 Pin, 6/15 Amp universal complete all as specified and as directed.

S & F ceiling rose, 3 phase/PVC/Polycarbonate, isolated body complete all as specified and as directed.

S & F stepped type fan regulator electronic flush type on existing phenolic laminated sheet, etc, complete all as directed .

Supply and fixing in repair ceiling fan 2/2.5 Mfd complete all as specified and directed.

S & F of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB, 240 V complete all as specified and as directed.

S&F sheet metal enclosures for DB’s double door suitable for mounting of MCB’s/Isolators, 240 Volt, SPN, 12 way with built in bus bar complete after taking down old unserviceable DB's and including making good the disturbed surface and matching with existing colour complete all as specified and as directed.

S&F VTPN distribution board with provision of MCCB as incommer, double door suitable for mounting MCB's/Isolators, 240 Volt,4 way with built in 160 A rated bus bar and with out MCCB complete after taking down old unserviceable DB's and including making good the disturbed surface and matching with existing colour complete all as specified and as directed.

S & F of MCCB 100 A, 4P, 415V, 50 Hz with breaking capacity of 16KA complete all as specified and as directed.

S & F of MCB, SPN, 240 V, 40 to 63A Amps, and ‘C’ series breaking capacity 10 KA complete ISI marked , all as specified and as directed.

S & F of MCB, SPN, 240 V, 32 A Amps, and ‘C’ series breaking capacity 10 KA complete ISI marked , all as specified and as directed.

S & F of MCB, SP, 240V, 40 Amps and ' C ' series breaking capacity 10 KA ISI marked complete, all as specified and as directed.

S & F of MCB, SP, 240V, 6 to 32 Amps and ' C ' series breaking capacity 10 KA ISI marked complete, all as specified and as directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engr-in-charge.

Supply and fixing circuit/ sub main wiring with two run of single core 10 Sqmm PVC insulated unsheathed stranded cable (FRLS) copper conductor drawn through PVC casing caping with all fittings including 10 sq mm PVC insulated unsheathed single core copper conductor as earth wire and including PVC casing caping and including PVC casing caping all as specified and as directed. Note : (i) Two run of single core cable 10 sq mm and one run earth wire 10 sq mm will be measured as one length

Supply and fixing circuit/sub main wiring with two run of single core 4 Sqmm PVC insulated unsheathed stranded cable (FRLS) copper conductor drawn through PVC casing caping with all fittings including 4.0 sq mm PVC insulated unsheathed single core copper conductor as earth wire and including PVC casing caping and including PVC casing caping all as specified and as directed. Note : (i) Two run of single core cable 4 sq mm and one run earth wire 4.0 sq mm will be measured as one length

M&L for earthing complete with galvanised steel earth plate electrode 600x600x 6mm thick burried in ground (earth pit not less than 2.25 m deep below ground level with top edge of the plate not less than 1.5 m below normal ground level, connected to earthing lead wire 4 mm dia as earthing by means of bolts, nuts, check nuts, and washers of GI or steel, GI strip protected by 40 mm bore medium grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade GI, wire mesh charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC(1:3:6) type C-1, 50 mm thick pre-cast RCC(1:2:4) type B-1 normally mix cover slab reinforced with in 8 mm dia TMT bar 10 cm C/C both ways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft/loose/hard soil and disposal of soil to a distance n.exc 50 m and necessry testing on completion all as shown in electrical plate No 3 MES schedule part-I complete all as specified and as directed.

Earth contunity conductor or main earthing lead fixed to wall or batten or recesss or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia galvanised iron or steel wire

Supply and fix exhaust fan noise free, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers including core cutting for mounting of exhaust fan with necessary electric connections complete all as specified and as directed by Engr-in-Charge. Note : Core cutting of suitable dia in wall and making good, removal of debris from the site shall be included in quoted rates.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. including two flexible steel pipe 600mm long. (inlet & outlet) with both ends screw bolt as specified.

Supply & install hi wall split Air conditioning units indoor/outdoor of cap 1.5 TR complete with cordless remote control unit and with built air ioniser and plasma filter for better indoor air quality, Stabilizer-free Operation with 5 star rating all complete. Make: Voltas, LG, LLoyd Note: (a) The contractor shall submit the PV for the same. The contractor shall submit the warrenty card of the same.

Supply & Fixing of Smart Fan Rod or Anti Suicide Fan Rod, length 300 mm (12"), white/brown, MS pipe, Zinc plated 19mm OD, (+/- 1.8 mm), 0.05 mm Thick, spring grade 3 carbon steel zinc plated, MSME Tested for performance test and opening at impact load of 22 Kg+ and spring hidden in pipe, will expand to amount 1 mtr and land person on ground safely and refixing the ceiling fan to original position, etc, complete including taking down ceiling fan, cleaning & dismantling down rod for fixing anti-suicide rod all as directed by Engr-in-charge shall deemed to be included in this item. all as specified and as directed by Engr-in-Charge.

M/S New Builders Corporation (BID ID -3488980)

M/S Subhadip Enterprise (BID ID -3489240)

DANATION CONSTRUCTIONS (BID ID -3488588)

M/S MBS TRADING CO (BID ID -3487184)

P .BANERJEE AND CO (BID ID -3488669)

M/S ASHA ENTERPRISE (BID ID -3488615)