CERTAIN REPAIR WORK IN JOINERY PLUMBING AND PLASTERING AND REPAIR WORK IN TILING SANITARY FITTINGS AND ALLIED WORK AT NEW NAVY NAGAR UNDER AGE BR I UNDER GE NW NAVY NAGAR COLABA MUMBAI

Amount

Demolition of brick or stone / boulder work, built in cement mortar in portion/ part ordered to be dismantled including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles including removing the debris from MD land complete all as specified and directed

M & L brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed

Taking down cement plaster on brick or stone wall etc of any discription including racking out joints hacking for key scrubbing down with water including removing the debris from MD land complete all as specified and directed

M&L Plastering on concrete surfaces of beams, lintels, walls etc, 20mm thick (15+5mm)in two coats in CM (1:4) , mixed with water proofing compound on fair faces of brick work or concrete surfaces, finished fair & even without using extra cement complete all as specified and directed WPC to be mixed in setting coat only and shall be measured and paid seperatley

Dismantling floor, hearth, or wall tiling / stone (marble, granite, kota etc) incuding cement mortar bedding with backing etc & rubbish off the premises complete all as specified and directed

S&F Non skid coloured ceramic tiles 300x300x 7 to 8 mm thick in floors etc set & jointed in neat cement slurry and pointed in white cement mixed with colour pigments to match the coloured tiles over and including 20 mm thick cement screed bed in cement mortar 1:6 complete all as specified and directed

S&F glazed coloured ceramic tiles 300 x 200 x 6 to 7 mm thick set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match the coloure of tile as in veritical surfaces over and incluing 10 mm thick cement plaster in cm 1:4 complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed

M&L pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including making grooves of minimum 50mm into brick walling and inserting the sheets into these grooves complete all as specified and directed

Demolition of cement concrete un-reinforced not exc 15 cm thick of any description and at any position and removing the debris outside the MD land complete all as specified and directed .

M&L for 75mm thick PCC (1:3:6 ) type C-1 using 20 mm graded stone aggregate as in plinth protection laid in panels finish the top surfaces even and smooth without using extra cement complete all as specified and directed

M&L 75 mm thick PCC 1:3:6 type C-1 (20mm graded agg) as in sub base flooring ,and similar works finished even & fair without using extra cement complete all as specified and directed .

M&L for Machine pressed precast coloured glazed concrete interlocking paver block with grey cement & pigment, glossy finish (reflective type) any shape and size (as approved by GE) confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, as in pavements to required level & gradients, set, jointed with clean dry sand and sealing the ends using PCC 1:2:4 including dismantling old paver blocks complete all as specified and directed

M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed

M&L coloured glazed cement concrete tiles 300 x 300 x 25 mm thick, machine pressed , glossy finish (reflective type), any design (as approved by GE); set jointed and pointed in neat cement slurry over and including 20 mm thick cement screed in CM 1:6 including dismantling old tiles complete all as specified and directed (Note : Cost for 20 mm thick cement screed is inclussive in the rate. No separate payment to be made.)

M&L for granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 15 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 10 mm thick cement plaster in cement mortar 1:3 complete all as specified and directed

M&L machine cut pre-polished kota stone slab flooring 20-25mm thick over and including 15 mm thick cement screed base (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed (Note : The rate includes the cost of cement screed bed)

M&L machine cut pre-polished kota stone slab in riser of steps, skirting, dado and pillar laid over and including 10 mm thick cement plaster in cm (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed (Note : The rate includes the cost of cement plaster )

M&L rendering 15 mm thick in CM (1:6) on wall finished even and smooth without using extra cement complete all as specified and directed

M&L applying two coats of oil emulsion distemper white or tinted on wall over a coat of primer & chalk whiting on new plasterd surfaces of wall after necessary preparation of surface complete all as specified and directed

M & L rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-410-W(Gde-E-250) quality-B complete all as specified and directed

Preparaing of new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed (Make : Shalimar Paints)

M & L Cement concrete type B-1, 1:2:4 (20mm graded aggregate) 40 mm thk in flooring complete all as specified and directed

M&L for preparing old plastered surfaces of wall and applying one coat of oil bound emulsion distemper complete all as specified and directed

M&L preparation of old painted surfaces over 10cm width or girth and applying one coats of synthetic enamel paint on steel surfaces complete all as specified and directed

M&L preparation of old undecorated surfaces of walls,soffits & fascias of chajjas etc and applying one coats of weather proof Acrylic based paint(100% Acrylic) exterior grade over a coat of primer complete all as per manufacturers instructions complete all as specified and directed

Taking down chowkats or frames with shutters w/o taking off suhutter from the frame area exc 1.50 Sqm but n-exc 4 Sqm each ( Wooden shutters & MS angle frame ) lcomplete all as specified and directed

Supply and fixing factory made plain framed panelled shutters (two panel ) 35mm thick 2nd class hardwood with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces . the size of rail and stile as per IS: 103 ( Part -I) kiln seasoned and chemically pressure treated. complete fixed to chowkats complete all as specified and directed

Supply and fixing( factory Made ) 2nd class hard wood 35 mm thick glazed and skelton shutters open rebated and prepared to receive gauge. (Without sash bars ) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a) supplied and fitted to chowkats complete all as specified and directed

Supply only 100mm long but hinges medium weight cold rolled complete all as specified and directed

S& F mild steel helical door spring 300mm long ordinary rat tail rod pattern spring including roller and roller plate and riveted and welding to existing angle iron chowkats complete all as specified and directed

Supply and fixing galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width ofaperture 1.18mm complete all as specified and directed

S&F Factory made PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm plain colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guge complete all as shown in sketch on page 150 of SSR 2010 Part 11. complete all as specified and directed

S&F factory made solid PVC door shutter 30mm thick (Style) consisting of frame made out of MS tube 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tuve 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails MS frame shall be covered with 5mm thick heat moulded plain colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick plain colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in drg give on page 146 of SSR 2004 part 11. The with of stiles and rails shall be as specified in para 8B.2.1 on page 134 of SSR 2004 part 11. Each PVC door shutter lef consist of 4 Nos 100 mm long MS power coated butt hinges complete all as specified and directed

Supply & fixing Aluminium alloy anodised sliding door bolts withhasp and stapple (bolt type and fxing clips of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded section of 250mm long complete all as specified and directed

Preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

S&F in repair towe raill long 600 mm long of PTMT fixed with and including chromiun plate brass screws and wooden / plastic cleats( minimum weight 190 gms ) complete all as specified and directed

Supply & fixing aluminum anodised barrel tower bolts of extruded section and fixed 150 mm long (ISI marked) complete all as specified and directed

Supply and fixing Aluminium anodised alloy cast type anodised handles of size 150mm long complete all as specified and directed

Demolition of lime Concrete of any description and in any position not otherwise specifically provided for including china mosaic & wc complete all as specified and directed

M&L for roughening the surfaces of old cement concrete floor by picking, cleaning and washing down with water to remove dust etc. rendering 15 mm thick in CM 1:3 mixed with water proofing compound and applying two coats of hot bitumen 85/25 grade @ 1.70 Kg/Sqm over vertical sides of sunken floors complete all as specified and directed . (Note : WPC shall be measured and paid seperately)

M&L cement concrete 1:7:12 with with 40mm graded stone coarse aggregate in sunken floor 150mm thick complete all as specified and directed

Supply only water proofing compound Fosroc Dr Fixit or equivalent complete all as specified and directed

S & F in repairs Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe ) including trap set in and including concrete including provision of lime concrete bedding complete all as specified and directed

S &F in repairs Cast iron nahani trap 100 mm dia with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specified and directed

M & L Applying one coat of Rust remover and rust passivator on exposed reinforcement surfaces at any height . complete all as specified and directed Make :- Pidiite fosroc or equivalent

M&L for rendering 10mm thick in CM (1:3) in ceilling complete all as specified and directed

M&L preparation of new undecorated surfaces of walls,soffits & fascias of chajjas etc and applying two coats of weather proof Acrylic based paint(100% Acrylic) exterior grade over a coat of primer complete all as per manufacturers instructions complete all as specified and directed

M&L applying two coat of oil bound emulsion distemper on old decorated surfaces including preparation of surface complete all as specified and directed

S & F in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples to wooden/aluminium frames complete all as specified and directed

M&L applying one coats of synthetic enamel paint including preparation of old wooden surfaces over 10cm width/girth complete all as specified and directed

S & F in repairs Pillar taps of 15 mm dia , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed

S & F in repairs PVC waste pipe of 32 mm dia 800 mm length complete all as specified and directed

S & F in repairs CP grating of size 100 mm complete all as specified and directed

S&F Vitreous China wash basin, white, flat back, size 550 x 400 mm excluding taps, wastes, chain and plug and porcelain but including brackets complete all as specified and directed

S & F in repairs 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed .

S & F in repairs 15 mm bore Bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed .

Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and directed

S & F 15 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes etc., laid in trenches complete all as specified and directed .

S & F in repairs 10 litres Vitreous China valve less, Syphonic action type, Flushing cistern low level, white with inlet ball valve float and handle inclbrackets complete all as specified and directed

Preparation of old decorated surfaces of walls by any means scrapping old surface washing the surface with Bleaching powder throughly,filling the cracks with cracks filling compound of DR Fixit crack free chemical or shrink free as per manufacturer instruction & applying one coat of weather proof acrylic based paint (100%) exterior grade up to the height of 6th floor including scaffolding complete all as specified and directed

Taking down CI soil/ waste/ vent/ pipes including all fittings like shoes bends swan necks etc of any dia complete all as specified and directed . ( Inclusive of scaffolding of any hight )

S & F CI soil/ waste/ vent pipe s in any length with ears 100mm bore ISI marked (sand cast) in any length with cement joints fixed to walls complete all as specified and directed

S & F CI bends or tee( any radius ) for soil / waste pipes 100 mm bore diminshing pieces or tapers on walls complete all as specified and directed

S & F CI branch pieces single (equal or unequal ) ordinary or inverted (spigot or socket type) wirh parallel branches for 100mm bore pipe all as specified and directed Note for similar items to be given :- (i) In case of similar items with different quoted rate are observed, the lowest quoted rate amongst all shall be considered and amount will be accordingly amended. The tenderer shall be note the above requirement & shall have no claim on this account

Shetty Construction Co

Darpan Construction

ORIENT ELECTRIC CO

SHREE JAGDISH FURNITURE CO.