Painting work on Internal and External surfaces, epoxy painting in main plant, WMCF and other buildings, and enamel painting on existing structures etc.in RAPS-3 and 4 and WMCF .

Removing old paint coatings from the concrete / plastered surfaces / Steel surfaces including ceiling and making them even and free from all kinds of defects such as burrs, undulations, imperfections by all suitable means such as scrapping, grinding, scrubbing, sand papering including repair of dents as per standard procedures etc. to make the surface ready to recieve fresh coat of paints all as per direction of engineer including cost of consumables, labour, tools tackles, scaffolding, protective gears, house keeping etc.

Varnishing with varnish of approved brand and manufacture : Two coats of glue sizing with copal varnish over an under coat of flatting varnish after cleaning / scrubbing of surfaces with wire brushes, soft brushes & sand papers including cost of materials, labour, cleaning of area after painting etc, complete as per direction of Engineer-in-Charge..

Providing & Applying of ASIAN / Nerolac Paint METAL PRIMER RED OXIDE (0005 / GR-0) as Directed by the Engineer-in- Charge.

Epoxy Painting on New Surfaces : Supply & Application of Epoxy Paint of approved brands (High Build Two pack Epoxy paint of Berger Protectomastic Vellum/Asian Apcodur CF 641/ Amerlock - 400) mixed with epoxy thinner, in one or two coats on new concrete / plastered / metal surface on floor / wall/ ceilings and filling holes /crack/undulations with epoxy paint putty mix with silica powder at all elevations of buildings including all materials, surface preparation, cleaning, scaffolding, masking for covering EP's, spreading of suitable clean protection covering on all exposed adjacent surfaces to protect them from staining and removal of the same after completion of painting etc. complete as per technical specifications and as directed by Engineer-in-Charge..

250 Micron DFT in two coats.

125 Micron DFT in single coat.

Epoxy Painting on previously painted Surfaces: Supply & Application of Epoxy Paint of approved brands (High Build Two pack Epoxy paint of Berger Protectomastic Vellum/Asian Apcodur CF 641/ Amerlock - 400) mixed with epoxy thinner, to a min. thickness of 75 Microns DFT in single coat on previously painted surfaces of concrete / plastered / metal surface on floor / wall/ ceilings including all materials, cleaning of surfaces by detergent where ever required, removal of stains if any, removal & repairing of damaged old painted patches if any with in the surface which is to be repainted under this item and application of paint over repaired patches before applying repainting on entire surface, scaffolding, masking for covering EP's, spreading of suitable clean protection covering on all exposed adjacent surfaces to protect them from staining and removal of the same after completion of painting etc. complete as per technical specifications and as directed by Engineer-in-Charge.

Extra over the above item no.5 for every subsequent coat of minimum 75 micron thickness

Extra over per coat (Inside Reactor buildings ,SFSB POOL AREA & RAB) for above item no. 5 & 6.

Providing & applying 2.5mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.

Providing & Applying one coat of aliphatic acrylic based protective paint by brush / spray on exterior plastered finish painted surface including scaffolding up to any height (Apprx. 40mtr.) & including preparing the surface by using wire brush / rotary wire brush, making the surface free from loose particles such as oil, greese or any other contamination and shall be cleaned including the cost of the finishing of surface irregularties such as blow holes, honeycombs, crevices and surface blemishes using polymer modified mortar (ploymer putty shall be provided by the contractor) to achieve smooth and levelled surface. Scaffolding / Suspended Plateform or jhulla etc., shall be provided by the contractor for painting and all radiological as well as Industrial Sfety requirements shall be followed during work. ( Make Asian / Nerolac / Berger)

Providing & Applying subsequent coat of aliphatic acrylic based protective paint by brush / spray on existing painted exterior surface up to any height (Apprx 40 Mtr) on rough cast / sand faced plastered surfaces etc. complete including cost of providing and erection/de-erection of scaffolding / suspended plateform or jhulla by the contractor for painting and all radiological as well as Industrial Sfety requirements shall be followed during work.

Enemal Painting work on existing painted surfaces.

Providing of premium gloss enamel in desired shades Product No. 0001-Gr-M1/M2/M3/Nerolac/burger/Asian Full Glossy Finish paint in desired shade and deposited in civil maintenance store.

Transporting the paint materials from civil store, finishing & applying of enemal paint One coat on all pervious painted surface on concrete / steel / wooden surfaces etc. after cleaning of the surface properly to the satisfaction of EIC for his clearance including cleaning of area after painting etc, complete as per direction of Engineer-in-Charge. (Paint material will be issued from civil maint. store). The scope under the item also includes spreading of suitable and clean protection covering on all exposed surfaces to protect them from staining and also the cleaning of all surface surrounding to painted area either freshly stained or stained during painting incluiding electrical fittings & boards window frames & window glass panes etc.to sparking clean condition using suitable thinners, detergents,chemical cleaners etc.

Extra over above item no. 11.2 for every subsequent coat.

Interior Plastic Emulsion painting work on existing painted surfaces.

Providing of Interior Plastic Emulsion of approved brand Apcolite Premium Emulsion (Asian) / Beauty Gold (Nerolac) / Easy Clean (Berger) / Weather coat CHAMP (Berger) and deposited in civil maintenance store.

Transporting the paint materials from civil store, finishing & applying of Plastic emulsion paint in single coats on previous painted surfaces of walls, columns, ceiling etc. after cleaning of the surface properly to the satisfaction of EIC for his clearance including cleaning of area after painting etc, complete as per direction of Engineer-in-Charge. (Paint material will be issued from civil maint. store). The scope under the item also includes spreading of suitable and clean protection covering on all exposed surfaces to protect them from staining and also the cleaning of all surface surrounding to painted area either freshly stained or stained during painting incluiding electrical fittings & boards window frames & window glass panes etc.to sparking clean condition using suitable thinners, detergents,chemical cleaners etc.

Extra over above item no. 12.2 for every subsequent coate.

Exterior emulsion painting work on existing painted surfaces.

Providing of exterior paint of approved brand Apex Dust Proof (Asian) / Excel Antipeel Formula (Nerolac) / Weather coat CHAMP (Berger) and deposited in civil maintenance store.

Transporting the paint materials from civil store, finishing & applying of Deluxe multi surface paint / Exterior emulsion paint in One coats on exterior wall surfaces after cleaning of the surface properly to the satisfaction of EIC for his clearance inclunding curing, cleaning of area after painting etc, complete as per direction of Engineer-in-Charge. (Paint material will be issued from civil maint. store). The scope under the item also includes spreading of suitable and clean protection covering on all exposed surfaces to protect them from staining and also the cleaning of all surface surrounding to painted area either freshly stained or stained during painting incluiding electrical fittings & boards window frames & window glass panes etc.to sparking clean condition using suitable thinners, detergents,chemical cleaners etc.

Extra over above item no. 13.2 for every subsequent coat.

Aluminium painting work on existing painted surfaces.

Providing of aluminum paint - Product Code- 0009/GR-M0 / Nerolac/burger/Asian Aluminium Paint and deposited in civil maintenance store.

Transporting the paint materials from civil store, finishing & applying of Aluminium paint One coat (excluding priming coat) on previously painted chainlink fencing & other connected equipments at all height with Aluminium paint of approved brand, manufacture and shade, including cleaning the surface of all dirt, dust & other foreign matter and sand papering etc. (Paint material will be issued from civil maint. store). The scope under the item also includes spreading of suitable and clean protection covering on all exposed surfaces to protect them from staining and also the cleaning of all surface surrounding to painted area either freshly stained or stained during painting incluiding electrical fittings & boards window frames & window glass panes etc.to sparking clean condition using suitable thinners, detergents,chemical cleaners etc.

Extra over above item no. 14.2 for every subsequent coate.

Providing & Applying floor painting upto 10 cm in width / girth (lines, dashes, arrows, zebra lining etc) one coat (excluding priming coat) on previously painted concrete/masonary/plastered surfaces with ready mixed synthetic enamel paint/brushing, for use on floor to give an even shade Upto 10cm in width/qirth including cleaning the surface of dirt, dust and other foreign matter and sand papering as required (payment will be based on length of each strip of zebra lining).

Providing & Applying Coal tar Epoxy painting two coats over previouse painted surface using 0.16 and 0.12 liter coal tar per Sqm in the first coat and second coat respectively after cleaning / scrubbing of surfaces with wire brushes, soft brushes & sand papers including the cost of materials, labour, cleaning of area after painting etc. complete as per direction of Engineer-in-Charge. ( Make Asian / Nerolac / Berger)

Providing of JK/ Birla Putty and depositing the same in Civil stores.

Providing of High quality finishable Plaster of paris of DCM brand or as approved by Engineer and depositing the same in civil maintenance store.

Providing of wall primer, WT - Product Code - 0360 / GR - M0 white (Water Based) / Nerolac/burger/Asian Water Based Primer and deposited in civil maintenance store.

Providing of Exterior wall primer Product Code 0065-Gr-M1/ Nerolac/burger/Asian Exterior Primer White / Elito Exterior Primer (PIDILITE IND) and deposited in civil maintenance store.

Providing Epoxy Paint of approved brands (High Build Two pack Epoxy paint of Berger Protectomastic Vellum/Asian Apcodur CF 641/ Amerlock - 400) and deposited in civil maintenance store.

Providing of Thinner for Synthetic Paint of approved brand as approved by EIC.

Providing of Thinner for Epoxy Paint of approved brand as approved by EIC.

Supplying Floor Repair Putty A fast draying 100% Solids, three component epoxy resin-based system, loaded with inert fillers. Enables quick repairs of holes and cracks in concrete floors, ramps, walls and also in grouting applications.

Writing letters or figures upto 15 cm. height on any surface with synthetic enamel paint including cost of paint of approved colour and brand etc. complete. (stop comas, hypens and the like not to be measured and paid for seperately for Block & Roman letters / figures).

Supply and application of self levelling floor topping in a single layer to acheive the desired thickness on concrete floors after preparing the surface in the specified manner by removing old paint coating of all thickness and types, smoothening the surface with the use of all suitable means including machine grinding, scrapping and sand-papering etc. filling the dents,undulations and cracks with the use of epoxy-sand mortar etc. and application of suitable epoxy primer in coats as per manufacturer's guideline/ instructions and procedure. The scope of item includes use of cleaning chemicals for cleaning surrounding surfaces either old stained or freshly stained to sparkling clean condition. Laying of Epoxy Self Levelling floor topping shall be got done through the authorized applicator of the manufacturer : 2mm thick (of Make SIKA/ BASF/ FOSROC).

Carrying out the job for miscelleneous painting , preparation of surface, cleaning job, unidentified works.

Painter for painting work. (Semi Skilled Worker)

Unskilled mazdoor / Helper for painter.

Carry out the work beyond normal duty hours.

Painter for painting work. (Semi Skilled Worker)

Unskilled mazdoor / Helper for painter.

Please Enable Macros to View BoQ information