Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance ROOM NO A 46 GALI NO 11 GANESH MURTHY NAGAR PART NO 3 CAPT PRAKASH PETHE MARG CUFFE PARADE COLABA MUMBAI 400005 | MUMBAI | MUMBAI | MAHARASHTRA | 400005 | Admitted-Finance |
| 2 | Admitted-Finance T 16 1 SHETTY HOTEL OLD NAVY NAGAR COLABA MUMBAI 400005 | MUMBAI | MUMBAI | MAHARASHTRA | 400005 | Admitted-Finance |
| 3 | Admitted-Finance SHOP NO 10 BMC SHOPPING CENTRE MITHA NAGAR GOREGAON WEST MUMBAI 400 104 | MUMBAI | MUMBAI SUBURBAN | MAHARASHTRA | 400104 | Admitted-Finance |
| 4 | Admitted-Finance TRIVANDRUM | Admitted-Finance |
| 5 | Rejected-Technical | Rejected-Technical Not enlisted in reqd categary |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
13 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE(I) ASVINI
AGE(I) ASVINI
REPAIR AND MAINTENANCE OF EXTERNAL WATER SUPPLY, PUMP, MOTORS, STARTERS AND CHLORONOME PLANT AND ALLIED WORKS AT INHS ASVINI
2023_MES_575539_2
8392/E8
Open Tender
Miscellaneous Works
Item Rate
270 days
AGE(I) ASVINI
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Yes
AGE(I) ASVINI
₹40,000
Yes
27 Feb 2023
25 Jan 2023
15 Feb 2023
25 Jan 2023
13 Feb 2023
25 Jan 2023
Amount
M&L for repairing, servicing, overhauling, rewinding of centrifugal pump set (both motor & pump) installed on common base plate including disconneting carefully electric connections of motors, earth connections, decoupling motor and pump removing foundation nuts and bolts and removing the motor and pump from its existing position of capacity 30 HP, 3 phase, 415 volts of any make and coupled cetrifugal pump and carried out overhauling work as under:- (I) Servicing of electric motor 30 HP comprising of :- (a) Dismantling of electric motor,separate stater,rotor cleaning the stater,rotor ,cleaning the stater body complete by rubbing with sand paper and remove all carbon. (b) Varnishng the stater winding and heating up at desired temp for achieving partcular Ohm resistance as per IS (c) Removing the bearing, cleaning, greasing it and replacing damaged bearing as per existing. (d) cleaning the motor terminal connection and retightening the connections. (e) Fixing the earth connection after cleaning and tightening complete including checking earth continuty. (f) Clean the rotor and assembling in motor (g) Replace all the greasing nipple of DE/NDE complete and nut and Bolt as per existing. (II) Servicing of centrifugal pump coupled with 30 HP motor :- (a) Open the split case of the pump by removing the nut, bolts, washers etc. (b) Change the damaged/ worn out parts like shaft ,sleeve and impeller ring. (c) Replace pump gland packing of existing size. (d) Replace pressue plate, water seal, cooling pipe as per existing (f) Replace new champion paper gasket. (g) Replace all the greasing nipple of DE/NDE complete and nut bolts. (h) Re assebling pump including replacing damaged nuts & bots, Connection /coupling the motor ,with pump connect all the electric /earth connections and mounting on foundation at its original position including nuts, bolts,washers,checking alignment of motor/ pump and testing on load complete all as specified and directed. (j) Fixing the earth connection complete including checking earth continuity. Note : The quoted rate shall includes replacing all the parts as mentioned in the above item .
Ditto- as per Item No 1.00 above but of capacity 15 HP complete all as specified
Ditto- as per Item No 1.00 above but of capacity 10 HP complete all as specified
M&L for rewinding the electric motor of submersible Pump, disconnecting electric connections, detaching motor and pump, and taking out from well from its existing position of capacity 10 HP, 7.5 KW 3 Phase 415 volts open submersible horizontal type of any make and taking out to workshop of authorised service centre of OEM for carrying out repairs, rewinding as under :- (a) Dismantling of electric motor, separate starter,rotor and cutting the complete burnt/defective winding (b) Cleaning the stater body complete by rubbing with sand paper and remove all carbon (c) Insert insulation material such as insulating paper sleeves. (d) Rewinding the stator with existing size of insulated copper winding as per original specification (e) Clean the rotor and assembling in motor (f) Replacing damaged bush/ bearing as per existng size (g) Replacing pressure plate, water seal, damaged nuts & bolts etc (h) Connecting /coupling the motor with pump, connect all earth /electric connections and mounting on foundation at its original position including nuts, bolts,washers including lowering to well and testing on load complete all as specified and directed.
Taking out submersible vertical type pumps with motor of capacity 3 HP and repairs to both pump and electric motor by replacing damaged / worn out impeller, guide rings, water seal, presure plate, bushes etc complete and rewinding electric motor with existing gauge super enamelled copper wire after replacing, insulation packings etc complete, re-assembling and lowering back in well and making all electric connection complete all as specified.
S & F rotational moulded polyethylene water storage tank 10000 Ltrs capacity, white colour (cylinderical vertical with closed top) with and including rotating (threaded) type tank cover including all connections for inlet, outlet, overflow and washout pipes etc. hoisted and fixed in position on terrace of upto G+8 building including disconnecting and taking down existing tank all as specified in SSR Part - I complete all as specified. Make : Sintex/ Infra / Ashish Plast
Ditto all as per item no 6.00 above but of capacity 5000 Ltrs.
Ditto al as per item no 6.00 above but of capacity 2000 Ltrs.
Ditto al as per item no 6.00 above but of capacity 1000 Ltrs.
M&L for PCC 1:3:6 type C1 using (20 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified.
S & F in repairs pressure gauge 0-100 PSI, dial type fixed on pumping line in various pumps complete all as specified.
S & F in repairs air release valve made out of brass suitable for pumpset of various capacities complete all as specification .
S & F in repairs indication lamp in panel R, Y & B phase complete all as specified.
M&L for repairs to CI foot valve of 200 mm dia fixed on suction line afters disconnection by opening of nut, bolts etc and taking out from under ground Sump and refixing in the same position affter replacement of leather/Neoprane/rubber sheetas per existing type including tightening of nut, bolts etc. complete all as specified
S & F in repairs CI foot valve flanged type of 200 dia fixed on suction line by means with and including suitable size nut, bolts, washers etc at under ground Sump complete all as specified.
M&L for preparation of old painted external surfacesof centifugal pump of 30 HP capacity by removing old paint by scraping from including filling cavities with approved filler if required and applying two coats of synthetic enamel paint as per existing colour including writing MES/SM No on painted surface complete all as directed by Engineer - in- charge
Ditto- as per item No 14.00 above but 15 HP capacity centrifugal pump.
Ditto- as per item No 14.00 above but 10 HP capacity centrifugal pump.
S & F in repairs fully automatic Star Delta startar for 30 HP motor, 3 phase, 415 volts & 50 Hz complete all as specified.
S & F in repairs fully automatic Star Delta startar for 10 HP motor, 3 phase, 415 volts & 50 Hz complete all as specified.
S & F in repairs contactor 415 volts, 63 amps for 40/50 HP motor complete all as specified.
S & F in repairs starting relay for 30 HP motor complete all as specified.
S & F in repairs Ammeter, square type,0-100 amps complete all as specified.
S & F in repairs Ammeter, square type,0-60 amps complete all as specified.
S & F in repairs volt meter,square type ,0-500 volts complete all as specified.
S & F in repairs gland packing of size 8+B45 mm to 16 mm complete all as specified.
S & F in repairs MCCB TPN, 415 V, adjustable type, 200 Amps with breaking capacity 25 KA complete all as specified.
S & F in repairs MCCB TPN, 415 V, adjustable type, 125 Amps with breaking capacity 25 KA complete all as specified.
S & F in repairs MCCB TPN, 415 V, adjustable type, 100 Amps with breaking capacity 25 KA complete all as specified.
M & L for repairs to water level indicator manual type installed at under ground sump at Main Pump House including replacing new rope, indicator symbol, hanging weight as per existing and painting on indicator level with marker and numbering (1 to 10 feet) and testing after replacement for smoothly functioning complete all as specified and directed.
Excavating in trenches n exc 1.5m wide & n exc 1.5m in depth; for foundation, laying of pipe etc. or for manholes n.exc.10 Sqm on plan and n.exc.1.5m in depth and getting out in hard/dense soil completes all as specified.
Returning filling in , including spreading, leveling, watering and well ramming in layers not exc 25 cm.
Removing excavated materials (soils) beyond 25 Km outside MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.
Supply,laying and jointing100mm bore ductile iron, spigot and socketed, class K-9, including rubber tyton joint conforming to IS , in any length , laid in trenches including testing on commpletion including taking out old U/s CI/ DI/ GI pipes from trenches complete all as specified.
Ditto- as per item No 34.00 above but 150mm bore.
Supply, laying and jointing in trenches 80mm GI tubing medium grade screwed and socket joint complete with all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc including taking down old GI/MS tubing including fittings complete all as specified.
Ditto- as per item No 36.00 above but 50mm bore.
Ditto- as per item No 36.00 above but 40mm bore.
Ditto- as per item No 36.00 above but 25mm bore.
Ditto- as per item No 36.00 above but 20mm bore.
S&F 15 mm bore GI tubing medium grade with all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc fixed to walls and ceilings or laid in floors with suitable size GI clamps including taking down old GI tubing including fittings complete all as specified.
Ditto- as per item No 41.00 above but 50mm bore.
Ditto- as per item No 41.00 above but 40mm bore.
Ditto- as per item No 41.00 above but 25mm bore.
Ditto- as per item No 41.00 above but 20mm bore.
M& L for cutting existing rising main and connecting 300 mm pipe line, by inserting CI tee, CI bends and sluice valve complete all as specified. Note: Jointing material, fittings & earth work will be measured and paid separately.
Ditto- as per item No 46.00 above but 200mm bore.
Ditto- as per item No 46.00 above but 150mm bore.
M & L for CI Bends (any type, radius and angle) tapers any type,(straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs suitable for 200 mm to 300mm bore spigot socketed pipe complete all as specified.
S&F repairs 50 mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipes complete all as specified.
Ditto- as per item No 50.00 above but 40mm bore.
Ditto- as per item No 50.00 above but 25mm bore.
Ditto- as per item No 50.00 above but 20mm bore.
S & F in replairs 50 mm bore ball valves, high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed complete all as specified
Ditto- as per item No 54.00 above but 40mm bore.
Ditto- as per item No 54.00 above but 25mm bore.
Ditto- as per item No 54.00 above but 20mm bore.
S & F in repairs 100mm bore CI sluice valve class PN-1.6 type ISI marked with iron wheel head brass spindle. Confirming to IS - 14846 flanged ends including rubber joints and jointing material all as required at site including any addition alteration for fixing at site including dismantling old unservicable CI sluice valve complete all as directed.
Ditto- as per item No 58.00 above but 150mm bore.
Ditto- as per item No 58.00 above but 200mm bore.
M & L for Construction of brick masonary valve chamber in repair of size 1000mm x 1000mm x 1000mm (internal dimension ) above ground level 30 cm suitable for 150 mm dia sluice valve , 15 cm thick foundation using PCC 1:4:8 type D-2 ( using 40 mm graded stone aggregate ) over 15 cm thick hardcore, 23 cm thick brick wall , bults in cement and sand mortor 1:4 , 15 cm thick internal and external plaster including top of floor in cement and sand mortor 1:3,finished even and smooth , without using extra cement, 10 mm thick mild steel plate cover on 50 mm x 50mmx6 mm MS angle iron frame embeded in PCC 1:2:4 type B-1 ( using 20 mm graded stone aggregate ) coping having rectangular hinged opening of size with locking arrangement & handle made out of 12 mm dia MS round bar , hold fasts etc, applying one coats od red oxide primer and two coats of synthetic enemelled paint to all steel surfaces and earth work in any type of soil including demolition of existing chamber and removing debries outside MD land complete all as specified. complete all as specified.
Ditto- as per item No 61.00 above but size 500mm x 500mm 500mm
M&L for cutting existing bituminus road surface not more than 150mm thick, 450mm wide for laying of pipes and making the disturbed surfaces good with PCC 1:3:6 type C-1 (using 20mm graded aggregate) to match with the adjustant surface complete all as specified. Note :- Excavation and earth work beyond 150mm thick will be measured and paid under relevant items.
S & F in repair brass spray Nozzle for water fountain No 1, 2 & 3 as per existing type complete all specified and directed by Engr-in-Charge.
S&F mild steel plates ( plain or chequered ) channels, square cut or notched ( ordinary and counter sunk ) forming holes, without any attachment including all necessory drilling, bolting,riveting or welding conforming to Fe-290 (Gde E-165) complete all as specified.
S & F in repairs PTMT float valve of size 50 mm with complete accessories complete all as specified and as directed please.
M&L for preparation of old painted external surfaces by removal of complete dust and removing loose paint by scraping from LT panel cubical type including filling cavities with approved filler if required and applying one coat of synthetic enamel paint as per existing colour including writing MES/SM No on painted surface complete all as directed by Engineer - in- charge, Size 1700mm x 1250mm x 350mm
Material & Labour for repairs/ Overhauling/Servicing to Existing LT electric panels indoor type by taking shut down from appropiate authority including checking loose connections and tight connection and cleaning inside/out side all connection, replacing all cable glands, thimbles and lugs as per the size of existing cable, applying petrolium jelly on the contactors, providing new insulation tape to bus bars, repair to broken/hanging doors by fixing hinges or welding the door to make it servicable and testing the entire panel board after the completion of servicing to the satisfication of Engr-in-Charge. (i) Cleaning inside the panel and all incoming and all incoming and out going feeder i.e includinging MCCB/SFU/Changeover switches/Contactors thorouly with help of Vaccum Cleaner (ii) Checking the loose connections of incoming and out going feeders and rectifify the same with help of new GI nut bolts and washers (iii) Replacing the burnt out color coated PVC Sleeve of main and fedders bus bar with appropriated size of new PVC heat shrinkable sleeves -01 job (iv) Replacing Burnt out Voltmeters/Ammeters/Indicating Lamps/HRC Fuses-01 Job. Note : New items will be measured and paid separately. (v) Replacing burnt out control wiring of Ammeter/Voltmeter.Indicating lamps and CT'switch 2.5/1.5 Sqmm copper single core, 1100V grade copper conductor cable -01 Job (vi) Replacing Burnt out Bus bar of incoming and out going conductor feededs with appropriated size of new bus bar (Copper/Aluminium) -01 Job (note : Bus Bar will measured and paid separately). (vii) Replacing Burnt out Insulators of incoming and outg oing feeders with appropriated size of new Insulators -01 Job (Note : Insulators will measured and paid separately) Note: The rates quoted above per unit shall deemed to be inclusive of taking out burnt ACB/MCCB/Voltmeter/Ampmeter/CT/LED lamps or any type and discription etc and refixing the same, which shall be measured and paid as supply only vide relivent items of this schedule.
Supply & Fixing Aluminium Bus Bar strips, of any size , for extention of MCCB terminals for cable terminations, inside the cable alley of LT Panel board, duly supported on the FRP/DMC support insulators including including necessary drilling/bending to obtain required shape and size complete all as sepcified and as directed. Note :- (a) Size of the strip shall be determinated depending upon the current carrying capacity of the individual outgoing MCCBs. (b) Overall length of the strip shall be measured and paid after necessary conversion into weight. (c) Cost of drilling/bending/grinding of the strips at site as required shall be included in the unit rate quoted. No extra payment shall be admissible on that account. (d) Rate of Bolts, nuts etc shall be included in quoted rate.
Supply & Fixing GI clamp made out of 50mm x 6mm GI flat including GI socket 20mm/ 15mm bore welded on 100mm to 150mm bore GI/ CI pipe after making hole for inserting socket including suitable size nuts, bolts, washers, rubber packing etc. complete as directed by Engineer- in-Charge
S & F in repairs SS spindle suitable for 80mm bore CI sluice valve including wedge nuts complete all as specified.
Ditto - as per item No 71.00 above but for 100 mm bore sluice valve
Ditto - as per item No 71.00 above but for 150 mm bore sluice valve
S & F in repairs 100mm bore CI non return valve with by pass arrangement including fixing arrangement complete all as directed by Engineer-in-Charge.
Ditto - as per item No 74.00 above but for 80 mm bore sluice valve
Ditto - as per item No 74.00 above but for 50 mm bore sluice valve
Ditto - as per item No 74.00 above but for 40 mm bore sluice valve
jkconstruction
Shetty Construction Co
Shree Ayyappa Engineering
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .