WBMAD/ULB/KHARAGPUR/NIT/45eWL

EMLight

Supplying and fixing Sheet steel Main Switches on flat iron frame on wall 30/32 A Havells make 240V DP with fuse on L&N

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2+4 way(Legrand) [PWD Schedule Page No-D-9;Iteam No-13]

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection 6-32A SP MCB(Legrand)

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. 32A DP MCB Isolator(Legrand)

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [PWD Schedule Page No-E-18;9b]

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required (iii) 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC [For SPN DB Supply & 16A power shocket ]

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish.(a) Average run 5 mtr

(d) Average run 9 mtr

(f) Average run 11 mtr

3.Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type plug socket & switch (Brand approved by EIC) on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works. (i) On Board

Supply of TMC501 Conventional industrial batten Philips LED tube, model no: TMC 501 P 1xT-LED 22 WP3241.

Fixing only Single/twin fluorescent light fitting complete with all accessories directly on wall/Celling by screws etc. [Page C-2, It. No. 14(a)]

Supplying of different types of LED lamps (12W) Make : Philips, 12.0 Wafl, Base B22/ E27, 1200 Lm Ref: I&W SOR 2022, Page No 114, No.5.3 F.26.1

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling. [Page D-13, It. No. 22]

Fixing only 15 W LED lamp [Page C-2, It. No. 11]

Supply and fixing of smart bright essential street light (70 Watts) complete with all accessories to be fixed /projected from the wall of the building or on pole incl. making holes/ providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.Make : Bajaj, 70 watts

Supply,delivery of LED Foodlight luminaire with secondary optics made in pressure die-cast housing and heat sink in aluminium extrusion with IP 66 & minimum output of 115 lumen/watt;Max wattage of 100watt.(Make-Bajaj,Havells,Crompton)(Model-BVP192 LED110CW HO NB FG GR PSU)(Warrenty 5 years)]

Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure.

Supplying of Swaged Steel Tubular pole (IS 2713, Pt. II 1980) for following designation and of following dimensions.410-SP-30 ; 9.0mtrs: 133 Kg

Erection of single steel tubular pole up to 9m including MS sole Each 4280.00 plate (23 m dia * 6 m thick ) cap etc over flyover bridge etc with C.C foundation (4:3:1) with graded stone chip (3/4" down) surrounding the pole base 2’ * 2’ up to a height of 1.35 m (4.1/2") from the pole base with 2 coats of black paint and then fixing the pole by means of 3 nos 4" * 1.1/2" * ¼” clamps to the fencing of the bridge at a suitable distance and providing the passage of wire / cable leading through hard polythene pipe (1.1/2") and also ebonite sheet 4-way ebonite terminal connector block including connection with lug by crimping arrangement and also neat cementing of pole base and finishing.

S/F 15 ft long 2" dia G.I. pipe (ISI medium) with necessary bends Each 1633.00 by means of reducing M.S. Socket ( 4.1/2"x 2.1/4") 9" long and 4.5mm thick with nece ssary bolts, nuts etc. as required as per direction of Engineer-In-Charge.

Construction of foundation of existing pole below G.L. having Each 1171.00 of dimension of 0.6 x 0.6 x 0.6 mtr (2’x 2’x2’) with graded stone chips (19mm down) in cement concrete proportion of 6:3:1 after necessary excavation including scraping

S/F M. S. loop box (10 SWG) of size 10.3/4 “x 8.3/4” x 5" Each 1147.00 (269mm x 219mm x125mm) having almirah type cover complete with special type locking arrangement including S/F 8 “x6” x1/4" (200mm x 150mm x 6 mm) bakelite sheet 1 no. 4-way ebonit connector block, 1 No. 15 Amp fuse unit fitted inside the box and suitable size danger board riveted on cover of the box outside & fixing the box with pole by means of M.S. Clamps of 1"x1/4" (25mm x 6mm) of suitable length and encasing the box by 1:3:6 cement concrete with graded stone chip (3/4" down). The depth of the concrete should be 60cm x 54cm x 54cm including plastering and neat cementing and S/F 2 Nos. compression gland of suitable size and making all necessary connections as reqd.

Dismantling steel tubular/Rail/Strut embedded in CC foundation incl. excavation, filling of holes, restoring surface, loading at site and delivering, unloading, sorting, stacking properly at any place as per direction upto a lead of 1.6 km

Supplying of 1.1 KV. Grade PVC insulated Conductor of following cables. (make: Polycab/Gloster/Havells/)10 Sq.mm 4-core.SoR UD&MA Pg-11 (1) c-3