Loading…
Loading…
Tender Value
₹94.6 L
EMD Value
₹1.9 L
Closing Date
1 Oct 2026, 3:00 pm4d left
Sourav Bhattacharya, Executive Engineer-NBDD
Annex Building, Uttarkanya
Strengthening and Repairing with Boulder Sausages Bunndh Near Bishu Marandi House beside Gadadhar River at Chaporerpar-II GP part no. 12/264 under Alipurduar-II Dev. Block in the district of Alipurduar in the year of 2026-27 (Length-180 m)
2026_NBDD_1040648_6
NBDD/BS/EE/NIe-T- 58/Sl. No. 01 to 21/2026-27
Open Tender
CIVIL WORKS
Percentage
300 days
Alipurduar
Please refer Tender documents.
6 documents required · 6 mandatory
₹1.9 L
Yes
1 Oct 2026
7 Sept 2026
5 Oct 2026
7 Sept 2026
1 Oct 2026
7 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation for Structures Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work (Reference to MoRT&H's specification clause 304).
13(i) Ordinary soil
13(i)A Manual Means (Depth upto 3 m) | 320.4 | Cu.M | 409.12 | ₹1,31,082.05 |
| 2 | Providing and laying of boulder apron laid in wire crates made with 4mm dia wire dia not less than 4mm GI wire conforming to IS: 280 & IS:4826 in 100mm x 100mm mesh Mesh size not
more than 150mm (weaved diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 40 kg each ( Tensile strength 300-450mpa, size of wire crates 3.0mx1.50mx1.25 m) (Reference to MORT&H's specification 2503). | 2,385.82 | Cu.M | 3,217.71 | ₹76,76,882 |
| 3 | Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications (Reference to MORT&H's specification 2504).4A Stone/Boulder | 160.2 | Cu.M | 1,552.54 | ₹2,48,716.91 |
| 4 | Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification Gradation of filter , Thickness of filter 200/300 mm (Reference to MORT&H's specification 2504). | 160.2 | Cu.M | 2,382.31 | ₹3,81,646.06 |
| 5 | Plain/Reinforced cement concrete in open foundation complete all including vibrating and compacting, finishing, curing, sampling, testing etc. as per drawing and Technical Specifications (Reference to MORT&H's specifications 1500, 1700 & 2200
PCC Grade M15 | 165.54 | Cu.M | 5,780.81 | ₹9,56,955.29 |
| 6 | Construction of Embankment with Material obtained from Borrow pits
Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2 & 300-1 .The size course material in the mix of earth ordinarily
shall not be exceed 75mm.(Reference to MoRT&H's specification clause 305)
Cost of compensation for Earth material & its carriage from private land at 5km distance have been included in the rate. | 267 | Cu.M | 259.58 | ₹69,307.86 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.90 MB
Tendernotice_2.pdf
PDF • 0.51 MB
BOQ_2555788.xls
BOQ • 1.01 MB
2nd_Date_Corrigendum.pdf
PDF • 0.44 MB
Date_Corrigendum.pdf
PDF • 0.72 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .