SPECIAL REPAIRS REPLACEMENT OF FIRE POINTS QTY 46 IN HOSP COMPLEX OF MH UNDER GE MH AND RH KHADKI

Amount

Supply and Fix in replacement of Hose box heavy duty made out of 16 gauge MS Sheet of size 800mm X 1000mmX 300mm with stand of MS Angle iron of size 50 mm x 50 mm x 5 mm upto the height of 1mtr from the ground levelwith 4mm thick glasses and door frame made of 16 gauge MS sheet painted with two coats of synthetic enamelled paint fire red outside and brilliant white inside over a coat of red oxide paint the hose box complete all as specified and directed.

Supply and Fix in replacement 63mm dia 15 mtr long canvas hose pipe confirming to IS 636 complete with male and female coupling confirming to IS 903 ISI marked complete all as specified and directed

Supply and Fix in replacement of hose reel drum consisting rubber hose real of size 15/20mm dia and 30 mtrs long ISI marked confirming to IS 5132 all as specified and directed. Note : Fixing materials such as fasteners, nut bolts and any civil work required for fixing the drum deemed to be included in the unit rate quoted.

Supply and Fix in replacement of Branch pipe gun metal 63mm instantaneous inlet, made threaded outlet, 15mm bore nozzle short ISI marked complete all as specified and directed.

Supply and Fix in replacement of nozel 15/20 mm dia, ISI marked complete all as specified and directed.

Supply and Fix in replacement butterfly valve slim seal standard lever operated type confirming to IS -13039 of 1991 or latest of size 200 mm dia, ISI marked complete all as specified and directed.

Supply and Fix in replacement butterfly valve slim seal standard lever operated type confirming to IS-13039 of 1991 or latest of size 250 mm dia, ISI marked complete all as specified and directed.

Supply and fix in replacement hydrant SS coupling male / female of dia 63 mm ISI marked conforming to IS 903 complete all as specified and directed.

S & F in replacement cast iron foot valve of size 150mm dia, confirming to IS 4038, ISI marked complete all as specified and directed.

Supply and fix in replacement 150 mm NRV confirming to IS-5312 (I) ISI marked complete all as specified and directed.

M & L for MS ERW Pipes of size 150 mm dia including all specials in any lengths & welding, cutting, bending etc complete laid in trenches/on walls and all as specified and directed.

Supply & Fix in replacement single type fire hydrant landing valve type A (Single headed outlet) of 63mm dia size made of brass, ISI marked all as specified and directed by Engr-in-charge.

Supply & Fix in replacement single type fire hydrant landing valve type A (Double headed outlet) of 63mm dia size made of brass, ISI marked all as specified and directed at by Engr-in-charge.

Supply install testing commissioning of Fire pump electrically driven horizontal type suction, centrifugal type conforming to IS -12469; 1998 with CI casing, bronze impeller and SS shaft mounted on heavy duty bearings suitable for continious operation with range of operation 0% to 150% of rated capacity for 440 volt, 3 phase, 50 Hz 70mtr head, discharge 1620 LPM Make : ABB/Seimens/Kirloskar Note : The foundation work shall be as per OEM recommendations & same shall be deemed to be included in the unit rate quoted.

Note : (i) Electrical connection from switchgear to bus bar would be through copper strips of suitable size. (ii) The internal electrical connection for measuring instruments would be through multi-stranded PVC insulated copper conductor cables of suitable size. (iii) The termination of incoming and outgoing cable into and from switchgear would be through properly crimped aluminum lugs of suitable rating incommensurate with that of switchgear. (iv) Cable glands would be provided for incoming & out going cables in panels. (v) The cost of fixing of the panel on PCC M-10 grade (nominal mix) using 20 mm graded black trap/basalt/granite stone aggregates foundation as directed by Engineer-in-Charge is deemed to be included in the quoted rates by the contractor for the above item. (vi) The bottom of panel shall have minimum 60cm height from existing ground / floor level.

Incomer

MCCB four pole 25 KA rapturing capacity 250 Amps Ics= 100% of Icu adjustable thermal magnetic setting including connection with bus bar - 01 Nos (as incomer)

Out going

MCCB three pole 16 KA rapturing capacity 160 Amps Ics= 100% of Icu adjustable thermal magnetic setting including connection with bus bar - 02 Nos (as outgoing)

Fully Automatic Star delta Starter MN type, 415 Volts suitable for 40 HP moter - 01 Nos. Make : L&T

LED type RYB phase indicator lamp with back up HRC fuse - 01 Set

Supply and fix in repair or replacement of risser door glass of size 150 X 300mm, ISI marked complete all as specified and directed.

Saviour Security Systems