Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.9 LAccepted-AOC BOOTH NO 15 SHOPPING COMPLEX URBAN ESTATE PHASE II JALANDHAR CITY PIN 144022 | JALANDHAR | PUNJAB | 144022 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹20.6 L+₹1.6 L (8.54%)Rejected-Finance SHOP NO 4 GULATI MARKET KRISHNA NAGAR NEHRU GARDEN ROAD JALANDHAR PUNJAB 144001 | JALANDHAR | PUNJAB | 144001 | L2 | Rejected-Finance L2 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
8 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (East) Jalandhar Cantt
Garrison Engineer (East) Jalandhar Cantt
PETTY REPAIR IN MAP QTRS. UNDER AGE B/R-II OF GE (EAST) JALANDHAR CANTT
2023_MES_594794_1
GE/JULL/ET-07/2023-24
Open Tender
Civil Works
Item Rate
273 days
Jalandhar Cantt
As per tender documents
8 documents required · 8 mandatory
₹500
Garrison Engineer (East) Jalandhar Cantt
₹50,000
Yes
7 Jul 2023
11 May 2023
15 Jun 2023
11 May 2023
8 Jun 2023
27 May 2023
Amount
Material and labour for Preparation of old surfaces of walls including scrapping down smoke, soot and efflorescent salts and treating oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of white wash on walls complete all as specified
All as per srl item No 1.00 here-in-before but one coat of white wash on ceiling surface complete all as specified
All as per srl item No 1.00 here-in-before but applying one coat of oil emulsion distemper on wall surfaces (white or tinted) complete all as specified.
Material and labour for preparing of old surfaces of walls and applying 3mm thick wall care putty on walls and finished smooth complete all as specified and directed.
Material and labour for preparing of old surfaces of ceiling and applying 3mm thick wall care putty on Ceiling and finished smooth complete all as specified and directed
Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.
Material and labour for preparation of old painted steel surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint all as specified
Material and labour for preparation of old decorated surfaces of walls including cornices pilasters etc (plastered or unplastered surfaces)and applying one coat of cement base paint complete all as specified.
Material and labour for machine cut kota stone slab flooring 20 to 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete including 20mm thick screed bed in CM 1:6, complete all as specified and directed.
All as per srl item No. 9.00 here-in-before but in riser of steps, skirting, dado and pillar laid over cement screed and jointed including 10mm thick screed bed in CM 1:4, complete all as specified and directed.
Material and labour for marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window, cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with Green Marble shade complete all as specified and directed
Material and labour for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified Note : Payment for providing grooves shall be made separately
Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and directed
Material and labour for 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base, sub floor of flooring, paving, path etc surfaces finished even and fair to receive top layer complete all as specified and directed.
Material and labour for 40 mm thick PCC 1:2:4 type B1 using 20 mm graded aggregate as in floor finishing cement concrete surface even & smooth without using extra cement complete all as specified and directed
Material and labour Non skid coloured ceramic tiles 7 to 8mm thick square/ rectangular area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match, laid over and including 15mm thick cement screed bed in cement mortar 1:6 complete all as specified and directed.
Supply and fixing Coloured Non Skid ceramic joint free tiles 7 to 8mm thick area of each tile exc 0.06 sqm but n exc 0.11 sqm in floors, set and jointed in neat cement slurryand pointed in white cement with pigment to match, laid over and including 15mm thick cement screed bed in cement mortar 1:6 complete all as specified and directed.
Material and labour for Preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of primer complete all as specified.
Material and labour for preparation of newly plastered surfaces and applying three coat of white wash on ceiling complete all as specified and directed
Material and labour for hacking out old broken glass (any thickness, size quality or description) from wooden or steel framed glazed with putty or fixed with beads complete all as specified and directed
Supply and fixing 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.
Supply and fixing 3mm thick sheet glass ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane complete all as specified and as directed.
Supply and fixing 4mm thick frosted sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm each panes complete all as specified and directed
Supply and fixing in repair 100mm but hinges extruded aluminium alloy with mild steel hinge pin anodized and fixed complete all as specified and directed
Supply and fixing in repairs aluminum anodised barrel tower bolt 300mm long of extructed section complete all as specified and directed
Supply and fixing in repairs aluminum anodised handle cast type 125 mm, anodised complete all as specified and directed
Supply and fixing in repairs aluminum alloys anodised sliding door bolt with hasp, staples 250MM (Bolt Type) and fixing clip of sheet cast or extructed section and fixing bolt and sliding bolt of extructed section or cast aluminum alloys and fixed complete all as specified and directed
Supply and fixing in repairs Magic Eye in Doors anodised complete all as specified and directed
Supply and fixing Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring overall length of cover plate 140mm complete all as specified and directed.
Demolition of cement concrete in ground floor and paving not exc 15cm thickness (below or above ground level) and removing surplus spoil out of Defence Land where directed at a level not exc 1.5 m above the starting point complete all as specified and directed
Material and labour for 40mm thick PCC (1:2:4) type B1 using 20mm graded aggregate as in floor topping; concrete surface finished even & smooth without using extra cement complete all as specified.
Dismantling floor, hearth or wall tiling dholpur / kota/ Chequered / udaipur/ granite stone tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
Material and labour for 25mm thick PCC (1:2:4) type B0 using 12.5mm graded aggregate as in sub floor , sub base; concrete surface finished even & rough to receive topping floor/ tiles finish/layer complete all as specified.
All as per srl item No 33.00 here-in-before but on vertical surfaces such as dado, skirting etc over and including 15 mm thick cement plaster finished even and rough to receive tiles in Cement mortar (1:4) complete all as specified
Material and labour for non skid ceramic coloured tiles of size 300 X 300mm & 7 to 8 mm thick in floor set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles with & including screed bed or beading layer of mortar 15mm thick in cement mortar (1:6) for laying floor finishes , complete all as specified and directed
Material and labour for coloured glazed tiles of size 300x450x6 - 7 mm thick fixed with neat cement slurry in vertical surface to wall pointing in white/coloured cement to match over and including 15mm thick rendering in CM 1:4, all as specified and directed
Material and labour for 15/16 mm thick machine cut green udaipur stone jointed with neat cement slurry mixed with pigment to match the colour of stone including cutting and polishing and making hole in stone and RCC shelves suitable for gas pipe, with round edges where required and including 15 mm screed bed with cement mortar 1:6 all as specified and directed
Material and labour for Chequered cement concrete tiles 25 cm x 25 cm x 20 to 22 mm thick, with grey cement and pigment, set jointed and pointed in neat cement slurry in floor laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified
Demolition of reinforced cement concrete of any description and in position not otherwise specifically provided for complete all as specified and directed
Material and labour for MS TMT bars 10 mm and over dia and cut to length, bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
Taking down door Shutters of any description exc 1 sqm and not exc 2 Sqm each all as specified
Taking down chowkats or frame not exc. 1.5 sq m each with shutters (without taking off shutters from the fames)
Taking down chowkats or frame exc. 1.5 sq m but n.exc 4 sq m each with shutters (without taking off shutters from the fames)
Supply and fixing structural steel Fe-410 w (Gde-E-250 Quality -B) framed work as in doors frame or gates including hold fast of angle or other section with gusset plates, rails, braces etc. Cutting, drilling and welding complete, drilled for fixing of steel sheeting or other covering. Doors etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete all as specified and directed.
Supply and fixing 2nd class hard wood 35mm thickness of factory made plain framed, panelled shutter with lock rail and panel of 9 mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed
Supply and fixing 2nd class hard wood 40mm thickness of factory made plain framed Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed
Material and labour for Anodised Aluminium Window/Ventilator Shutter side hung having 75mmx44mmx2.85mm thick stile bottom rail an top rail including necessary fitting joinery clest glazing packing snap beading 10mmx10mm, 2 Nos of anodised aluminium handle 150mm size, 2 Nos Chromium Plated butt hinges 75mm size and 2 Nos 100mm long aluminium tower bolt etc including frame of section 100mm x44mmx3mm and including 5mm thick float glass and fixing complete all as specified and directed
Supply and fixing 2nd class hard wood 35 mm thick glazed and skeleton shutters, factory made, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I, sector 8, clause 8.20 (a) complete all as specified and directed
Supply and fixing PVC solid door frame of size 50mm x 47mm made out of 5 mm plain/colour PVC sheet to be matched with shutter, reinforced with MS square tube, as per specification and drawing in SSR Part-II complete all as specified and directed
Supply and fixing factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and directed.
Supply and fixing in repair 100 mm MS butt hinges, medium weight cold rolled fixed with screws or welded on wooden or steel frame complete all as specified.
Supply and fixing 300 mm long mild steel sliding door bolts stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified.
Supply and fixing Mild steel pressed handles oval type stove enamelled black 150 mm size complete all as specified
Supply and fixing PTMT handles 150 mm size fixed with screws complete all as specified
Supply and fixing Mild steel barrel tower bolts, 200mm long, stove enamelled black, with bright bolt complete all as specified
Supply and fixing in repair 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified
Supply and fixing in repair 100 mm MS butt hinges, medium weight cold rolled fixed with screws or welded on wooden or steel frame complete all as specified.
Supply and fixing in repair 75 mm MS butt hinges, medium weight cold rolled fixed with screws or welded on wooden or steel frame complete all as specified.
Supply and fixing steel windows 1.25 mm thick Box type (primer coated) ERW hollow 'P' section of size 60 mm x 25 mm single rebated comprises of glazed shutter EWR sec 50 mm x 20 mm and 1 mm thick and two openable leaf consisting two Nos sash bar of 'T' section 20 mm x 3 mm complete welded to frame with one vertical mullion of EWR bot 'T' section of size 60 mm x 25 mm and 1.25 mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1, four Nos for each window including following fittings welded to failed shutter:- (a) Holdfasts 150 mm long 12mm x 3 mm made to shape- 4 Nos per window (b) Handle of Z sec 20 mm x 25 mm, 100 mm long - 1 No per leaf. (c) MS tower bolt 150 mm long - 2 Nos per leaf. (d) 'Z' sec 20 mm x 25 mm , 100 long stopper-01 No per leaf, (e) Cleat 55mm long of hollow square 15 mm x 20 mm x 63 mm welded to hinges - 1 No per leaf (f) MS pintal hinges of size 75 mm x 12 mm - 2 Nos per leaf. (g) fabrication and fixing arrangement complete. Note:- Grill / guard war , glass pane shall be measured and Paid separately
All as per srl item No. 59.00 here-in-before but in gauged shutters without sash bars all as specified and directed
Supply and fixing mild steel framed work for such as guard bars/grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars barred iron door ,railings and similar work complete conforming to Fe-290 Gde-E-165 including one shop coat of zinc chromate primer complete all as specified and directed
Taking down and refixing the shutter of any description in the same opening after easing and adjusting and making the door closing properly area of shutter of area exc 1sqm and not exceeding 2 sqm each complete all as specified and directed.
Resecuring or earsing and adusting without taking down of shutters of any description exc 1 sqm and n-exc 2 sqm each complete all as specified and directed.
Supply and fixing in repair 12 mm plywood, grade BWR type BB fixed with screw to timber frame work for shutter, shelves etc including removing old work from site any thickness complete all as specified
Petty repair to wooden/PVC Cup Board shutters by making minor adjustment to hinges etc easing shutter including taking down of shutter if required and refixing in same position including welding to angle iron chowkhats complete all as specified
Petty repair to existing steel window by welding hinges or removing the steel window shutters from the frame and re-fixing after making serviceable complete all as specified and directed
Supply and fixing in repair steel window handle MS painted with black japan left or right side complete all as specified and directed
Supply and fixing in repair steel peg stay 250mm long black japan fixed with screw or welded if required complete all as specified and directed
Material and labour for welding in repairs not exceeding 2.5 cm in length & thickness of metal to be welded not exceeding 6 mm complete all as specified and directed
Supply and fixing in repair anti dusting rubber beading for door shutter for anti-snakes, dusting etc complete all as specified and directed
Supply and fixing in repair galvanised mild steel wire cloth nominal dia of wire 0.56mm and average width of aperture 1.18mm in wooden/steel frame complete all as specified and directed
Supply and fixing 2nd class hard wood plain fillets square or rectangular or tri angular in section and bull- nosed, splayed, chamfered or rounded on one edge or face, clean sawn planed on both sides secured with nails or beads in section exc 3 sqcm but not exc 6 sqcm including painting all as specified and directed
Material and labour for mild steel pipe 25 mm dia curtain rod with PVC coating fixed in the MS hooks, and finials/side brackets (both side), shade as approved by GE all as specified.
Material and labour for mild steel pipe 25 mm dia curtain rod of Fancy type model with PVC coating fixed in the MS hooks, and finials/side brackets (both side), shade fixed in repair all as specified.
Petty repair to PVC door shutters by making minor adjustment to hinges etc easing shutter including taking down of shutter if required and refixing in same position including welding to angle iron chowkhats complete all as specified and directed
Petty repair to existing built in steel cup board, locks, hinges including necessary welding and making the lock/ steel cup boards complete serviceable all as per existing pattern as directed including provision of new keys complete all as specified and directed
Supply and fixing in repair 20mm dia curtain rails , mild steel , chromium plated fixing in cup board with brackets, stops, rollers etc, all as specified
Material and labour in repairs 18/19 mm thick prelaminated particle board exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination as a cup board shelf, fixed with screws to timber framed work including fixing arrangement complete all as specified
Supply and fixing in repair peg set of six made of stainless steel all as specified and directed
Supply and fixing 40mm dia, cupboard knobs brass polished fixed with nut, screw and washer of mild steel, bright finished all as specified and directed
Supply and fixing Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed all as specified and directed
Supply and fixing 100 mm Hasp & Staple extruded aluminium alloy, fabricated type, anodised including bolt to hinge plate and fixed with screws with Cup Board shutter, all as specified and directed
Petty repair to Steel rolling shutters system of any size and any description including repairing of ball bearing, top cover, anchoring rod, hasp and staple, gear operated system, crank handle, chain wheel and hand chain including necessary welding, greasing etc and making the shutters complete serviceable all as per existing pattern all as specified and directed
Material and labour Racking out joints/pointing hacking for Key, scrubbing down with water and Flush pointing in cement mortar 1:3 on brick tiles laid flat complete all as specified.
Material and labour for plastering in patches not exceeding 3 sqm in each patch, 15 mm thick in cement mortar 1:4, finished even and smooth (without using extra cement) including taking down plastering and three coats of white/colour wash complete all as specified.
Material and labour for plastering in patches not exceeding 3 sqm in each patch, 5 mm thick in cement mortar 1:3 on ceiling , finished even and smooth (without using extra cement) including taking down plastering and three coats of white wash complete all as specified.
Demolition of cement concrete of any description and in any position (as in sunken portion also) and removing surplus spoil out of defence land where directed at a level not exc 1.5 m above the starting point all as specified and directed
Material and labour for cement concrete type E - 2, 1:5:10 (using 40 mm graded brick aggregate) as in sunken flooring in patches not exceeding 3 sqm in each patch including demolition of existing concrete and removing surplus spoil out of defence land where directed at a level not exc 1.5 m above the starting point all as specified and directed
Material and labour for applying two coats of SHALIMAR SUPERCRETE/ NITOBOND water proofing coating on the entire surface of sunken portion all as specified .
Material and labour for 15mm thick cement screed in CM 1:3 admixed with integrd water proofing compound FOSROC’s complast X 421 IC @ 130ml per bag of cement incl a bonding coat of FOSROC”s Nito bond AR cement slurry/STP NO 1 liquid @ 200ml per bag of complete all as specified.
Material and labour for 25 mm thick cement concrete type B-1, 1:2:4 (20 mm graded aggregate) to receive the top layer of tiles
Supply and fixing CP grating 125mm dia fixed in repair all as specified and directed
Taking down steel water tubing and connections, cleaning and refixing old 15 mm bore steel tubing and connections in new or old position with walls, ceiling, floors, etc. complete all as specified
Taking down steel water tubing and connections, cleaning and refixing old 20 mm bore steel tubing and connections in new or old position with walls, ceiling, floors, etc. complete all as specified
Taking down steel water tubing and connections, cleaning and refixing old 25/32 mm bore steel tubing and connections in new or old position with walls, ceiling, floors, etc. complete all as specified
Taking down steel water tubing and connections, cleaning and refixing old 40/50 mm bore steel tubing and connections in new or old position with walls, ceiling, floors, etc. complete all as specified
Taking down steel water tubing and connections, cleaning and refixing old 80 mm bore steel tubing and connections in new or old position with walls, ceiling, floors, etc. complete all as specified
Supply and fixing medium grade steel water tubing, 15 mm bore galvanised (including taking down) with all fittings such as Union, Tank nipple with tank fittings and socket, elbow, nipple etc. and fixed complete to walls or layed in floors all as specified and directed
Supply and fixing medium grade steel water tubing, 20 mm bore galvanised (including taking down) with all fittings such as Union, Tank nipple with tank fittings and socket, elbow, nipple etc. and fixed complete to walls or layed in floors all as specified and directed
Supply and fixing medium grade steel water tubing, 80 mm bore galvanised (including taking down) with all fittings such as Union, Tank nipple with tank fittings and socket, elbow, nipple etc. and fixed complete to walls or layed in floors all as specified and directed
Supply and fixing medium grade steel water tubing, 50 mm bore galvanised (including taking down) with all fittings such as Union, Tank nipple with tank fittings and socket, elbow, nipple etc. and fixed complete to walls or layed in floors all as specified and directed
Supply and fixing medium grade steel water tubing, 40 mm bore galvanised (including taking down) with all fittings such as Union, Tank nipple with tank fittings and socket, elbow, nipple etc. and fixed complete to walls or layed in floors all as specified and directed
Supply and fixing medium grade steel water tubing, 32 mm bore galvanised (including taking down) with all fittings such as Union, Tank nipple with tank fittings and socket, elbow, nipple etc. and fixed complete to walls or layed in floors all as specified and directed
Supply and fixing medium grade steel water tubing, 25 mm bore galvanised (including taking down) with all fittings such as Union, Tank nipple with tank fittings and socket, elbow, nipple etc. and fixed complete to walls or layed in floors all as specified and directed
Supply and fixing Low density polyethylene (LDPE) pipes 15 mm bore of pressure rating 6 kgf/sq. cm with all fittings such as Union, Tank nipple with tank fittings and socket, elbow, nipple etc. all as specified and directed
Supply and fixing Low density polyethylene (LDPE) pipes 20 mm bore of pressure rating 6 kgf/sq. cm with all fittings such as Union, Tank nipple with tank fittings and socket, elbow, nipple etc. all as specified and directed
Supply and fixing Low density polyethylene (LDPE) pipes 25 mm bore of pressure rating 6 kgf/sq. cm with all fittings such as Union, Tank nipple with tank fittings and socket, elbow, nipple etc. all as specified and directed
Supply and fixing in repair GI socket/GI Nipple(100/150mm Long)/GI Tank Nipple with check nuts and washers/GI Union/GI Elbow/GI Tee for 15mm bore replaced independently as approved by Engineer-in-Charge
Supply and fixing in repair GI socket/GI Nipple(100/150mm Long)/GI Tank Nipple with check nuts and washers/GI Union/GI Elbow/GI Tee for 20mm bore replaced independently as approved by Engineer-in-Charge
Supply and fixing in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (min wt 210 gm) complete all as specified
Supply and fixing in repair 15 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (min 142 gm) complete all as specified
Supply and fixing in repair 20 mm for ball valve brass high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified
Supply and fixing in repair 32 mm for ball valve brass high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified
Supply and fixing PVC cover of water tank matching with existing water tank complete all as specified
Supply and fixing 500 ltr rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hosted and fixed in position including dismantling of existing tank of any description ISI marked complete all as specified
Supply and fixing 1000 ltr rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hosted and fixed in position including dismantling of existing tank of any description ISI marked complete all as specified
Supply and fixing in repair PVC white low level flushing cistern 10ltrs capacity with all fittings syphonic action push stype with inlet ball valve and float including PVC flush pipe, ball valve, handle, MS bracket etc complete all as specified
Petty repair to leaking flushing cistern low/high level, incl adjustment in the internal fitting repair to PVC bends pipe, flush pipe etc all as per directed by Engineer-in-Charge
Supply and fixing in repair vitreous china squatting pan of Orisa pattern size 580mmx400mm white with ‘P’ or ‘S’ trap front or back inlet and integral foot rest complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair vitreous china ware wash hand basin white flat back size 550mm x 400mm excl taps, waste chain and plug and porcelain stopper but including bracket and cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed
Supply and fixing vitreous china wash down water closet (Pedested pattern ) white including fixing bolt, plastic water closet seat cover black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device, fixed in repairs all as specified directed
Supply and fixing in Repair waste Coupling Suitable for Existing WHB/Sink all as specified
Supply and fixing in repairs waste pipe suitable for Existing WHB/Sink all as specified
Petty Repair for stop leaking of PTMT Bib tap/ Pillar tap/Stop cock by suitable jumper washer and etc, complete all as specified
Supply and fixing in repair Bib Cock long nose (Foam Flow) with Flange of MAKE: Prayag CAT No. 9806 or equivalent makes of Group I of Appx “B” suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.
Supply and fixing in repair single lever basin mixer with popup waste of MAKE: Prayag CAT No. 9451 or equivalent makes of Group I of Appx “B” suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.
Supply and fixing in repair 2 way angular stop Cock with Wall Flange MAKE: Prayag CAT No. 9911 or equivalent makes of Group I of Appx “B” suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.
Supply and fixing in repair Wall Mixer 3-in-1 with provision for both Over Head Shower and Hand Shower complete with 115mm long bend Pipe, connecting legs & wall flange of MAKE: Prayag CAT No. 9880 or equivalent makes of Group I of Appx “B” suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.
Supply and fixing in repair Concealed Stop Cock with Adjustable Wall Flange of MAKE: Prayag CAT No. 9818 or equivalent makes of Group I of Appx “B” suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.
Supply and fixing in repair angular stop Cock with Wall Flange of MAKE: Prayag CAT No. 9810 or equivalent makes of Group I of Appx “B” suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.
Supply and fixing in repair Over Head Shower square wall shower (Adjustable) of size (9”x9”) including all fittings of MAKE: Prayag CAT No. BOS-33 or equivalent makes of Group I of Appx “B” suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed
Supply and fixing in repair Jet spray with holder for EWC 1.5mtr long of MAKE: Prayag CAT No. BEA-17 or equivalent makes of Group I of Appx “B” suitable for 15mm dia for iron pipe or for brass ferrule all as specified & directed.
Supply and fixing in repair, Coloured PVC bath Cabinet of size 450x450x90mm with Looking Mirror (as approved) fixing with Chromium plated Brass Screws and Wooden/Plastic Cleats, complete as all specified and as directed.
Supply and fixing in repair, Sheet Glass Shelf Assembly, consisting of 5.5mm thick Sheet Glass Shelf 12 Cm Wide with Chromium plated Bracket Guard and Railing 60 Cm long, complete all as specified and as directed.
Supply and fixing in repair, Sheet Glass Corner Shelves Assembly, consisting of 5.5mm thick Sheet Glass Shelf with Chromium plated Bracket Guard and Railing 60 Cm long, complete all as specified and as directed.
Petty Repair for stop leaking of CP Brass Bib tap/ Pillar tap/Stop cock/ by suitable spindle and etc, complete all as specified
Petty Repair for stop leaking of Group-I Makes CP Brass bib tap/ Pillar tap/Stop cock/wall or WHB Mixture by suitable original spindle(Mini weight-100 grams), complete all as specified
Supply and fixing in repairs for 15 mm bore bib taps of PTMT any colour high pressure screwed for iron pipe and fixed(Minimum weight 15mm-90 gms) complete all as specified and directed
Supply and fixing in repair Bib tap cast copper alloy suitable for 15mm bore iron pipe complete all as specified
Supply and fixing in repair Bib tap cast copper alloy , chromium plated suitable for 15mm bore iron pipe with long body fancy type complete all as specified.
Supply and fixing in repair 15 mm bore stop cock PTMT of any colour screwed for iron pipe and fixed (Min wt 15mm-90mm) complete all as specified
Supply and fixing in repair 20 mm bore stop cock PTMT of any colour screwed for iron pipe and fixed (Min wt 15mm-90mm) complete all as specified
Supply and fixing in repair pillar tap, PTMT 15mm bore dia of pipe screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed
Supply and fixing in repair pillar tap, cast copper alloy, with capstan heads, 15mm bore dia of pipe chromium platted screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed
Supply and fixing in repair PVC connection fiber, reinforced 45cm long 15mm in size with brass check nut and PVC washers at both ends complete all as specified
Supply and fixing in repair 15mm Angle/stop valves, fancy type chromium plated, screwed down, high pressure with crutch or butter fly handle screwed at two right angles ends for both iron pipe complete all as specified
Supply and fixing in repair 20mm stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed .complete all as specified
Supply and fixing in repair 15mm stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed . Complete all as specified
Supply and fixing in repair Swivel shower of PTMT of any colour for fixing with 15mm pipe (Min wt 40 Gm) complete all as specified.
Supply and fixing in repair brass chromium plated shower rose of 125mm size, with or without swivel joints including fixing to GI pipe complete all as specified
Supply and fixing in repair Brass chromium plated tubular tower rail 20mm dia , D type, 60cm long between flanges complete all as specified
Supply and fixing in repair Brass chromium plated tubular tower ring 150mm dia round , D type, between flanges complete all as specified
Supply and fixing in repair Soap dish stainless steel chromium plated fixed with brass screws and rawl plug complete all as specified .
Acrylic corner set of 3 pieces as per sample approved by Engr -in-charge all as specified and directed
Supply and fixing Chromium plated health faucet for EWC with 1 m long CP tube with CP wall hook superior quality all as specified
Supply and fixing Toilet paper holder of Chromium plated fixed to walls with chromium plated (CP) brass screws,all as specified and directed
Supply and fixing in repair plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated hinging device, fixed in repairs all as specified and directed Engr-in-Charge.
Supply and fixing in repair Mild steel chromium plated jet for EWC 600mm long tube superior quality all as specified.
Material and labour in repair stainless steel plate rack of superior quality size 36" x 24" with not less than 8 kg all as specified .
Supply and fixing in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and waste coupling and waste pipe over all size 915 mm x 460 mm bowl size 410 mm x 330 x 160 mm. complete all as specified
Supply and fixing in repair wall mixer fancy type cast copper alloy chromium plated high pressure with crutch or butterfly handle non telephonic complete all as specified.
Supply and fixing in repair CP grating 125mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani Trap or floor trap complete all as specified
Supply and fixing Cast iron floor trap,75mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified
Supply and fixing PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement Complete all as specified
Supply and fixing Cast iron floor trap 100mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified
Supply and fixing Cast iron Nahani trap 75mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified
Supply and fixing Cast iron Nahani trap 100mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified
Supply and fixing in repair for 110mm PVC pipe single socketed in any length with rubber joints fixed to wall complete all as specified.
Supply and fixing in repair for 110mm PVC bends / shoe of any radius complete all as specified
Supply and fixing oval access door cover cast iron fixed with CI Pipe with washer, nut & bolt including cleaning and applying cement around the pipe hole for arresting the seepage all as specified and directed
Cleaning of floor trap and applying of cement around the floor trap with sealant compound for arresting the seepage all as specified and directed by Engr-in-Charge. Make:- WACKER SILICONES (GP Silicone Sealant )
Material and labour for preparation of new wood or wood based surfaces of any description, not otherwise described over 10cm width or girth and applied two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
Material and labour for preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applied two coat of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed
Material and labour for preparing new plastered or unplastered wall surfaces and applied two coat of cement base paint over one priming coat complete all as specified and directed.
Dismantling of brick work or stone/boulders masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc. and rubbish materials remove from site all as specified and directed
Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6
All as per srl item No 177.00 here-in-before but except bricks
Supply and fixing in repair 300mm MS ordinary rat tail rod pattern springs including roller and roller plate complete (Helical door spring) Make Ritz or equivalent as approved welded to steel chokhat complete all as specified and directed
Supply and fixing in repair Hot and cold mixer fancy type single or double legged cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends iron pipe suitable for 15mm bore pipe fixed to wash hand basin complete all as specified
Supply and fixing door closer hydraulically regulated, designation No. 1 universal type, cast Iron type suitable for door shutters up to 700 mm in width and of weight not more than 35 kg complete all as specified
Material and labour for new ware PVC Syphon for flush tank (White) cistern part flush tank lever as specified and directed
Material and labour for fortune PVC rubberized water leakage Seal Tape, Silicon Sealant Tape, Waterproof Flex Tape for Seal Leakage Super Strong Adhesive Tape for Water Tank Sink Sealant for Gaps Flex Tape complete all as specified
Material and labour for instant leak plug for fast setting powder for stopping drip leakages in water tanks and Hardens instantly under continuous wet conditions complete all as specified
Cleaning/clearing of sewage line 150mm dia mechanically by using suction (vaccume) machine from WC to manholes or from cleaning eyes including getting out sludge/ waste from manholes and well flushing after cleaning, removing sludge/ waste to low lying area as directed by Engineer-in-charge (upto 1.5m depth from top of MH to bottom of pipe) all as specified and directed. Note : The suction machine and sewer jetting machine shall be arranged by contractor as directed by Engineer-in-charge during the contract period at his own cost.
All as per srl item No 185.00 here-in-before but 200mm dia sewage lines.
All as per srl item No 185.00 here-in-before but 150mm dia sewage lines (exc 1.5m and n.exc 3.0m in depth).
All as per srl item No 185.00 here-in-before but 200mm dia sewage lines (exc 1.5m and n.exc 3.0m in depth).
All as per srl item No 185.00 here-in-before but 300mm dia and upto 450mm dia sewage lines (exc 3.0m and n.exc 4.5m in depth).
Removing the sludge/ spoil after getting out from septic tanks/ cess pool/ manholes to a distance not less than 1500 mtr including loose dirty stones etc, with combined high pressure water, jetting cum suction (vaccum) type machine mounted on vehicle and having facilities of high pressure of water thermoplastic fiber blended water jetting house and through conical/ round shape nozal pipe and removing outside MH land in low lying area complete all as specified and directed.
FRIENDS ENGINEERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .