KMC/LTG/Z-IV/30/26-27

Outdoor Lighting Installation, Steel Tubular Pole, M.S. Pipe, G.I. Pipe, Pole CAP etc Supplying of Swaged Steel Tubular pole as per IS 2713, Pt. II, 1980 for following designation and of following dimensions.(Outside dia & thickness are given in Annexture -1)k) 410 SP - 53 ; 11.0 Mtr., 183.00 Kg.

SCHEDULE OF RATES FOR OH LINE INSTALLATION (LTDISTRIBUTION).Erection of Poles.Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work(site including filling up the excavated earth pit with shifted soil and ramming properlyAbove 9.0 mtr. Size 0.6x0.6x1.91 mts

Outdoor Lighting Installation, Steel Tubular Pole/ M.S Pipe/ G.I. Pipe, Pole CAP etc.Erection of single steel tublar pole up to 9m including ms sole plate (23m dia * 6 m thick) cap etc over flyover bridge etc with c.c foundation (4:3:1) WITH GRADED STONE CHIP (3/4'' DOWN) SURROUNDING THE POLE BASE 2*2 UP TO A HEIGHT OF 1.35M (4.1/2'') FROM THE POLE BASE WITH 2 COATS OF BLACK PAINT AND THEN FIXING THE POLE BASE WITH 2 COATS OF BLACK PAINT AND THEN FIXING THE POLE BY MEANS OF 3 NOS 4*1.1/2'' *1/4'' CLAMPS TO THE FENCING OF THE BRIDGE AT A SUITABLE DISTANCE AND PROVIDING THE PASSAGE OF WIRE/CABLE LEADING THROUGH HARD POLYTHENE PIPE (1.1/2'') AND ALSO EBONITE SHEET 4-WAY EBONITE TERMINAL CONNECTOR BLOCK INCLUDING CONNECTION WITH LUG BY CRIMPING ARRANGEMENT AND ALSO NEAT CEMENTING OF POLE BASE AND FINISHING WITHOUT LOOPBOX.

S/F of special head type M S loop box (3 mm thick) with connecting bar and other accessories fixed on the top the pole as required and as per direction of Engineer-In-Charge. For 3 phase connection.

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of(approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. FOR receiving fresh coat of paint.Above 9.0 mtr. long pole 1st coat of aluminium paint over 1 coat of RO priming

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of(approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. FOR receiving fresh coat of paint.Above 9.0 mtr. long pole 2nd coat of aluminium paint over 1st coat

S/F arm bracket of 50 mm bore tubular Pipe (M.S.) of 1. 5 m (5') length for fixing on 75/100 mm pole top including S/F 4 mm thick M.S. plate welded with bolts, nuts & clamps, etc. as required with fabrication work

Supplying Al.conductor PVC insulated and sheathed unarmoredcable (1.1KVgrade, Gloster/Havells/Polycab). 16sqmm x 4core

Supplying Al.conductor PVC insulated and sheathed unarmoredcable (1.1KVgrade, Gloster/Havells/Polycab).10sqmm x 4core

Supply and drawing of 7/14 SWG galvanised stranded wire for drawing unarmored cable (supply of cable is not included in the scope) by catenary system of wiring with 3nos. reel insulator per mtr. and binding with binding wires etc,as reqd. for drawing