SPECIAL REPAIR TO FLOORING, TILING, PLUMBING INCL SANITARY FITTING JOINING, ROOF TREATMENT INCL PLASTERING AND INTERNAL ELECTRIC WIRING TO BUILDING NO NP-63/1-8 (08 QTRS) GOVT MD ACCN BHATTACHARJEE ENCLAVE AT MAMUN UNDER GE (N) MAMUN

Amount

Taking down chowkhats or frames of any description not exc 1.50 Sqm each with shutters, (without taking off shutters from the frame) including builders hardware , complete all as specified and directed.

Taking down chowkhats or frames of any description exc. 1.50 Sqm and n.exc 4.00 Sqm each with shutters, (without taking off shutters from the frame) including builders hardware complete all as specified and directed.

Taking down shutter of any description exceeding 1 sqm and not exceeding 2 sqm each including builders hardware etc, complete all as specified and directed.

M&L for Box type Steel windows and ventilators comprised of tubular frame and shutters made out of 1.25mm thick M S sheet tube factory made with double side hung wire gauged shutter & glass/glazed shutter (wire cloth and glass panes only shall be measured and paid separately) with steel handle and steel peg stay dovetailed or welded incl 2 Nos. tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg, welded to F I frame work, including other fittings; hinges, handles, tarred hold fasts fixed in PCC blocks all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for pressed steel frames 125mmx60mm for door, made out of 1.25 mm thick MS sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate and back filling for chowkats in PCC (1:3:6) type C-0 (using 12.5mm graded crushed stone aggregate) tarring ends incl 02 coats of synthetic enamel paint over a coat of red oxide primer on exposed surface complete all as specified and directed.

M&L for pressed steel frames 105mmx60mm for door, made out of 1.25 mm thick MS sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate and back filling for chowkats in PCC (1:3:6) type C-0 (using 12.5mm graded crushed stone aggregate) tarring ends incl 02 coats of synthetic enamel paint over a coat of red oxide primer on exposed surface, complete all as specified and directed.

M&L for 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated, fitted to chowkhats complete all as specified and directed.

M&L for 35mm thick glazed and skeleton shutters (Factory made) of 2nd class hard wood open rebated kiln seasoned & chemically pressure treated and prepared to receive glass/gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-1 section 8 clause 8.24(a), fitted to chowkats complete all as specified and directed.

M & L for preparation of new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for factory made solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet with one or more rebate reinforced with MS square tube, fixed in opening as per specification & drawing No CEPZ/TD-378/11 sheet No 1/1, complete all as specified and directed.

M&L for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed.

M&L for pressed steel frames 75mmx50mm for door, made out of 1.25 mm thick MS sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate and back filling for chowkats in PCC (1:3:6) type C-0 (using 12.5mm graded crushed stone aggregate) tarring ends incl 02 coats of synthetic enamel paint over a coat of red oxide primer on exposed surface complete all as specified and directed.

M&L for 18 to 20mm thick prelaminated PVC solid board (one side decorative choice laminate and other side balancing white) as in kitchen cabinet, cupboard and pelmet box fixed with screws to steel/timber frame work complete all as specified and directed.

M & L preparation of Old wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L two coats of synthetic enamel paint on old steel surfaces of any description, n.exc 10 Cm in width or girth, including preparation of surfaces, complete all as specified and directed.

M&L for Stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staple complete all as specified and directed.

M&L for Stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staple as in repairs complete all as specified and directed.

Hacking out old broken glass ( any thickness , size, quality, or description) from metal frame glazed with putty or fixed with beads/ clips complete all as specified and directed.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads/ glazing pins not .exc 0.5sqm in each pane complete all as specified and directed.

M&L for 3mm thick figured glass, pin head type, ordinary quality and glazing with oil putty or fixed with beads/ glazing pins not exc 0.5sqm in each pane, etc complete all as specified and directed.

M&L for 300 mm long aluminium alloy sliding door bolt with hasp & staple (bolt type) and fixing clip of sheets cast or extruded section and fixing sliding bolt of extruded section complete all as specified and directed.

M&L for Aluminium anodised barrel tower bolt, extruded section 200mm long , complete all as specified and directed.

M&L for aluminium alloy handle, fabricated type extruded section, ISI marked of size 150mm complete all as specified and directed.

M&L for Mild steel powder coated door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate including necessary welding complete all as specified and directed.

S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&Fstainless steel Peg set of six fitted with machine screws and wooden and plastic cleats (minimum wt 190 gms) complete all as specified and as directed.

S&F 100 mm long hasp and staple , mild steel , wire type stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repair for 20mm bore Curtain rails ,anodised aluminium alloy with bracket ,end bulbs, fancy type, fixed in postion complete all as specified and directed.

Demolitin of brickwork built in cement mortar including all quions ,arches,pillars etc but excluding ashlar facings dressed stonework and pre cast concrete articles complete all as specified and directed.

M&L for Brick work with Fly Ash Brick (Non-Modular) Class 7.5, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and directed.

M&L for Cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregates) such as in benching, coping, Bed blocks and the like, rounded or chamfered on edges etc complete all as specified and directed.

Taking down cement plaster on brick walls or stone walls any description etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement ,complete all as specified and as directed.

M&L for rendering 5mm thick cement plaster on surfaces of concrete ceiling in cement mortar (1:3), surface finished even and smooth using extra cement, complete all as specified & directed.

M&L for Rendering 15mm thick in two layers (base layer 10mm in CM 1:6 & finishing layer 5mm thick in cement mortar (1:4) using liquid water proofing compound ( In 2nd Coat layer only@200ml/bag) on brick work or concrete surfaces of wall surfaces finished even and smooth using extra cement complete all as specified & directed. (Note : WPC shall be measured and paid separately)

M&L for rendering or plastering work 10mm thick in CM 1:3 in fascia or edging of Chajjas, ceiling and roof projections etc, including taking out peeled off plaster / concrete and making the line in true shape and finishing the surface without using extra cement.

M&L for preparation of new plastered surface of external wall/chajjas and making the surface smooth with sand paper and priming the surface with alkali resistance primer as per recommendation of manufacturer for external surface, over primed surface applying two coat of cement base paint including curing complete all as specified & directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of distemper oil emulsion (OBD) over a coat of cement wall primer (from same manufacturer of OBD) over and including a layer of wall care putty not less than 2mm thick complete all as specified and directed.

M&L for three coats of white wash on newly plastered surface of walls including preparation of surfaces all as specified and directed.

M&L for three coats of white wash on newly plastered surface of ceiling including preparation of surfaces all as specified and directed.

M&L two coats of Oil bound distemper over and including a coat of 2 mm thick wall care putty on old surface of wall including preparation of old plastered surface complete all as spd and directed.

M&L for Preparation of old surface after complete removal of existing treatment making the surface smooth and applying two coats of cement base paint over and including a coat of alkali resistant priming paint as per manufacturer recommendation complete all as specified and directed.

M&L for preparation of existing white washed surfaces of ceiling and apply two coats of white wash on plastered surfaces complete all as specified and directed.

Demolition of cement concrete (unreinforeced) in floors and paving n.exc 15cm thickness (above or below ground level) complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in plinth protection laid in slope finished even and fair including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio (1:2) by weight complete all as specified and directed.

M&L for Non-skid ceramic coloured rectified edges joints free tiles 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc, set & jointed in neat cement slurry and pointed in coloured epoxy grout to match laid over and including 15mm thick screed bed or bedding layer of cement mortar (1:4) including dismantling existing floor tiles of any type and pattern including cement mortar bedding and removing debris/tiles out off the premises, etc complete all as specified and directed.

M&L for Non-skid ceramic coloured rectified edges joint free tiles 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm on vertical surfaces in skirting etc (to match flooring tiles), set and jointed in neat cement slurry and pointed in coloured epoxy grout to match tiles over and including 10mm thick backing coat in cement mortar (1:3), surfaces finished even and rough to receive tiles, including taking out plaster/ tile of any type and removal of rubbish out off the premises, complete all as specified and directed.

M&L for 12 mm thick Endura tiles for stair/step (Square or rectangular) area of each tile exc 0.08 Sqm but n exc 0.18 sqm in etc, set and jointed in neat cement slurry and pointed in coloured cement to match the tiles laid over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4), Including dismantling old floor tile incl cement mortar bedding and removal of debris out of premises complete all as specified and directed.

M&L for Glazed ceramic (coloured) tiles 7mm thick, of size 450mmx300mm, on vertical surfaces such as dado etc, set and jointed in neat cement slurry and pointed in coloured epoxy grout to match tiles over and including 10mm thick backing coat in cement mortar (1:4), surface finished even and rough to receive tiles, including dismantling existing tiles of any type and pattern including cement mortar backing coat and removal of rubbish out off the premises, etc complete all as specified and directed.

M&L for Marble Green/Bhaislana Zebra 18 to 20mm thick (table rubbed and premirror polished) in single piece in steps, jambs, pillars, window-cills, cooking platforms and like set and jointed in neat cement slurry including pointing in epoxy grout to match marble shade, including making hole for gas pipe including round chamfering the edges of marble stone , laid over and including 15mm thick screed bed in CM 1:4, including Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc and brusing neat cement slurry with 3.00 kg per sqm complete all as specified and directed.

Taking up or down GI water tubing and connections including cleaning for refixing or removal to store for 15mm bore complete all as specified & as directed.

Taking up or down GI water tubing and connections including cleaning for refixing or removal to store for 20mm bore complete all as specified & as directed.

S&F for GI water tubing 15mm bore, medium grade galvanized with all fittings (such as tee, elbow, socket, union, short pieces) fixed to wall or ceiling or laid in floor complete all as specified and directed. (Note : Cutting chases and making good shall be measured and paid separately)

Refixing of old steel tubing 15 mm medium grade galvanized ISI marked with and including all fittings short pieces and fixed to wall, floor etc complete to walls, floor etc complete all as specified and directed.

Cutting chases not exceeding 10cm in width/girth for concealed water tubing or concealed conduit wiring etc and making good in cement mortar 1:3 to match existing surface etc complete all as specified and directed.

S&F for GI water tubing 20mm bore, medium grade galvanized with all fittings (such as tee, elbow, socket, union, short pieces) fixed to wall or ceiling or laid in floor complete all as specified and directed. (Note : Cutting chases and making good shall be measured and paid separately)

Refixing of old steel tubing 20 mm medium grade galvanized ISI marked with and including all fittings short pieces and fixed to wall, floor etc complete to walls, floor etc complete all as specified and directed.

S&F in repair Stop valve/ Angle valve cast copper alloy (ISI Marked) chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia complete all as specified and directed.

S&F in repair 15mm bore Stop valves fancy type, chromium plated cast copper alloy long shank and exposed part kit with fitting sleeve, operarting lever & adjustable wall flange (concealed type) screwed both ends for iron pipe or for unions complete all as specified and directed. Make : Jaquar Cat part No CON-083FT & CON-083FTK or equivalent of Hindware/Marc.

S&F in repair for 15mm bore bib taps fancy type with wall flange, chromium plated cast copper alloy long body with capstan heads, screwed for iron pipe or brass ferrule complete all as specified and directed.

M&L for Vitreous china wash hand basin, white, flat back, size 550x400mm (Make : Jaquar Cat part No CNS-WHT-801 or equivalent model in Hindware/Parryware/Somany) brackets, CP waste coupling, 32mm bore PVC waste pipe of min 600mm long & 15 mm bore PVC connections, including cutting for and pinning in end of brackets or erecting stand fixed in repairs complete all as specified and directed.

S & F in repairs 15mm bore Pillar cock fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked complete all as specified & as directed.

S&F in repair for single towel rail brass chromium plated 600mm long fixed with chromium plated screw and PVC cleat complete all as specified and directed. Make : Cat part No AQN-7711 of Jaquar or equivalent model in Hindware/Marc.

S&F in repair Brass Chromium Plated shower rose with arms fancy type with swivel joints 75 mm face dia of appoved make and cat part for 15mm bore iron pipes complete all as specified and directed. Make : Prayag Cat part No BS-73 or equivalent model in Hindware/Marc.

S&F in repair for Vitreous china White Squatting Orissa Pattern pan of size 580x440mm, including cast iron ‘P’ or ‘S’ trap, front or back inlet and integral foot rests and making connection to trap and to flushing pipe, anti syphonic pipe with & including provision of PCC 1:5:10 type E-2 bedding including demolition complete all as specified and directed. (Note : Demolition and refilling of concrete in sunken portion is included in the Contractor quoted rate.)

M&L for Rendering 15 mm thick on brick work or concrete surfaces in CM 1:4 with and including water proofing compound to sunken portion with proper slope towards outside and finishing cement concrete surface even and smooth using extra cement including application of 90 micron polythene film and applying bitumen coating @ 3.00 Kg/Sqm etc complete all as specified and directed. [Note : WPC shall be measured and paid seperately]

S&F in repair for dual flush PVC flushing cistern 10 Ltr capacity, valve-less syphonic action type, low level, complete with inlet, ball valve, handle, including brackets/pins, PVC flush pipe 32mm bore and PVC connection 15mm bore 450mm long etc complete all as specified and directed.

S&F in repair for PVC connection 15mm size with PTMT nuts of length 450mm long of appoved make complete all as specified and directed.

S&F in repair for Rotational moulded polyethylene water storage tanks three layer of capacity 500 litre, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm ball valve high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and dismantling of existing PVC tank of any capacity complete all as specified & directed.

S&F in repair 20mm bore gun metal gate valve, with cast iron wheel head, screwed both ends for GI pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butterfly screwed down for GI pipe 20 mm dia complete all as specified and directed.

M&L for PVC (SWR) rain water pipes of 110mm bore dia in any length, with rubber ring joints, fixed to walls with stack clamp made out of 25mm by 2 mm galvanised iron flat fixed with bolt and nuts, including taking down existing CI/SWR pipes etc complete all as specified & directed.

S&F 110 mm bore bends PVC (SWR) (any radius) fixed with cement solvent etc complete all as specified and directed.

S&F in repair for 100 mm bore, sand cast, cast iron soil, waste and vent pipe with cement joints, in any length with ears, fixed to wall with stack clamp made out of 25mm x 3mm galvanised flat iron fixed with bolt and nuts etc complete all as specified and directed.

S&F in repair for 100 mm bore, cast iron bends (any radius), diminishing pieces or tapers (large bore measured) without oval access door complete all as specified and directed.

S&F in repair for 100 mm bore, cast iron branch pieces or Tee, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors etc complete all as specified and directed.

S&F in repair for 75 mm bore, sand cast, cast iron soil, waste and vent pipe with cement joints, in any length with ears, fixed to wall with stack clamp made out of 25mm x 3mm galvanised flat iron fixed with bolt and nuts etc complete all as specified and directed.

S&F in repair for 50 mm bore, sand cast, cast iron soil, waste and vent pipe with cement joints, in any length with ears, fixed to wall with stack clamp made out of 25mm x 3mm galvanised flat iron fixed with bolt and nuts etc complete all as specified and directed.

S&F in repair for 75 mm bore, cast iron bends (any radius), diminishing pieces or tapers (large bore measured) without oval access door complete all as specified and directed.

S&F in repair for 75 mm bore, cast iron branch pieces or Tee, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors etc complete all as specified and directed.

S&F 100 mm Cast iron floor trap, with CP grating including jointing to waste pipe fixed in cement concrete type B-0 (1:2:4) complete all as specified and directed.

S&F 75 mm Cast iron floor trap, with CP grating including jointing to waste pipe fixed in cement concrete type B-0 (1:2:4) complete all as specified and directed.

S&F in repair 50 mm Cast iron cowl, fixed with cement joints complete all as specified and directed.

S&F in repair for Stainless steel sink with draining board 1mm thick sheet for kitchen with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm and bowl size 405mm x 355mm x 178mm, including 32mm bore PVC waste outlet pipe of minimum length 600mm complete all as specified and directed. Make : Blue star Cat part No BSSBSD-52 or equivalent model in Nirali/Jyoti

S&F Stainless steel plate rack of approx size 750x900mm fixed with chromium plated screw and PVC cleat complete all as specified and directed. Make : Blue star Cat part No KPR-312 or equivalent model in Nirali/Neel Kanth/Jyoti

Dismantling of brick tiles,terracing tiles, in single layer from roof laid ,bedded and pointed in any mortar as specified and directed.

M&L for PCC 1:2:4 as in type B-0 padding to roof, surface finished even and smooth without using extra cement incl demolition of existing cement concrete,complete all as specified and directed.

M&L for Plain cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregates) such as in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary formwork incl demolition of existing cement concrete complete all as specified and directed.(Item also applied in broken RCC chajjas and roof projection)

M&L for 20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified & directed.

M&L for APP modified roof treatment over existing accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification complete all as directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufactured by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane, Physical property of membrane shall be as under :- (i) Membrane weight not less than 3.60 Kg/Sqm. (ii) Non woven polyester weight not less than 160 gsm/Sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 650/Sqcm and transverse not less than 450/sqcm at 230 degree Celsius. (v) Tear strength - longitudinal not less than 300 N & transverse not less than 250N. (vi) Elongation of reinforcement not less than 30%. (vii) Impermeability under water pressure not less than 3 Kg/Sqcm. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap.

M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification complete all as directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufactured by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane, Physical property of membrane shall be as under :- (i) Membrane weight not less than 3.60 Kg/Sqm. (ii) Non woven polyester weight not less than 160 gsm/Sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 650/Sqcm and transverse not less than 450/sqcm at 230 degree Celsius. (v) Tear strength - longitudinal not less than 300 N & transverse not less than 250N. (vi) Elongation of reinforcement not less than 30%. (vii) Impermeability under water pressure not less than 3 Kg/Sqcm. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.

M&L for 40mm thick Fly Ash brick tiles laid on cement mortar & joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement over and including 15mm thick screed bed or bedding layer of mortar in CM 1:6 complete all as specified and directed

All as per Srl. Item No. 92 above but except brick tile using serviceable brick tile retrieved from srl item No. 86 item above complete all as specified and directed

Supply only liquid water proofing compound complete all as specified and as directed

Taking down carefully unserviciable/ damaged copper/aluminium surface (batten/coduit or casing caping) point wiring any length for light/fan/socket or power including unscrewing from board (fitting and fixture such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sockets, Bracket /sketch fitting etc ) and removing material from site and making good to the disturbed surface to match with existing finish complete all as specified and directed.

M&L for Point wiring using FRLS PVC insulated unsheathed /multi stranded copper conductor cable 1.5 sqmm including 1.5 Sqmm FRLS PVC insulated unsheathed copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bend, junction box and pressed steel sunken box 60 mm deep & 1.6 mm thick duly painted inside and anticorrosive out side for mounting switches, sockets, fan regulators with 3mm thick plastic laminated sheet cover of suitable size, connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble of pin/u type (conduit shall be fixed on surface of ceiling with necessary saddles where concealing of conduit is not feasible), for light/fan/bell point complete all as specified and directed. (Note : Switch/bell push/fan regulator shall be measured and paid separately)

All as per Srl item No. 96 above but one light point controlled by two, two way switches, etc complete all as specified and directed.

All as per item No 96 above, but for 5 pin 5 Amp socket outlet point on idependent board controlled by one switch 5 Amp one way, etc complete all as specified and directed

All as per item No 96 above, but for 5 pin 5 Amp socket outlet point controlled by one switch 5 Amp one way on same board, etc complete all as specified and directed

All as per item No 96 above, but for one 15 Amp socket outlet point concealed using 2.5 Sqmm FRLS PVC insulated multi-strand copper conductor wire including 2.5 Sqmm FRLS insulated unsheathed copper conductor earth wire and making good to disturbed surfaces of wall floor to match existing finished etc complete all as specified and directed

S&F Modular Socket outlet, 5 pin, multi purpose 2 module 6 Amps, AC 230 volts, etc complete all as specified and directed. Make : Crabtree (Verona) Cat Part No : ACVKSWW065 or equivalent of Legrand/Siemens/Schenider.

S & F modular switch piano type flush button single pole one way 6 Amp one module, front operated complete all as specified and directed.

S & F modular switch piano type flush button single pole two way 6 Amp one module, front operated complete all as specified and directed.

S&F Modular Switch 1 way 16 Amps , 1 module etc complete , all as specified and directed. Make : Crabtree (Verona) Cat Part No : ACVSXXW161 or equivalent of Legrand/Siemens/Schenider.

S&F Modular Socket outlet, 5 pin, multi purpose, 2 module 6/16 Amp, AC 230 volts, etc complete all as specified and directed. Make : Crabtree (Verona) Cat Part No : ACVKCWW163 or equivalent of Legrand/Siemens/Schenider.

S&F Ceiling rose polycarbonate isolated body surface Bakelite, not less than 65 x 50 mm, three terminals, AC 230 volts etc, complete all as specified and directed. Make : Havells Cat Part No Reo/Cona Cat Part No 9246/GM Cat Part No 8224

S & F Fan regulator modular step type suitable for 1200/1400mm sweep ceiling fan hum free, 120W- 2 module including necessary connections complete all as specified and directed.

S&F Modular bell push, 10 Amp,1 module AC 230 Volt etc complete all as specified and directed. Make : Crabtree (Verona) Cat Part No : ACVSBIW101 or equivalent of Legrand/Siemens/Schenider.

S&F Bell Ding Dong AC 230 Volt, single Pole etc complete all as specified and directed. Make : Anchor Cat Part No 8024 or equivalent of Havells(Reo)/SSK (Topline)/GM (Vyoma)

S&F Lamp holder insulated body with back plate suitable for batten fitting including 12W LED lamp of approved make and cat part and PVC Round/Square block etc complete all as specifeid and directed. Make : Anchor (Penta) Cat Part No : 51170 or equivalent of Havells(Reo)/SSK (Topline)/GM (Vyoma) for Lamp holder & Make : Wipro/Philips/Crompton/Havells for LED lamp

M&L for Sub main wiring with FRLS PVC insulated unsheathed 2X6 sqmm multistranded copper conductor cable 1100 V with 1X6 sqmm FRLS PVC insulated green multistranded copper cable for continuous earth drawn through & including concealed PVC conduit of appropriate size not less than 20 mm dia & 1.8mm wall thickness with all accessories including cutting grooves and making good disturbed surface to match existing including taking down existing surface sub main wiring complete all as specified and directed. (Note: Two runs of FRLS PVC cable with one run of earth conductor and conduit shall be measured as one RM.)

S & F in replacement LED batten alongwith LED T8 tubular lamp 20W Linear LED T8 tubular lamp with extruded aluminium/pc body and PC diffuser and inbuilt driver, 230 volts wall mounted complete with all accessories internally pre wired and including connecting up with three core twisted flexible copper conductor cable of suitable size including taking down old UNSV tubelight fitting any type. Make of battern-Crompton batten Cat Pt No DMLN1LT8-16 and LED tube Rod Cat Pt No LTT8-20 or Make - Equivalent in Havells, Philips, Bajaj and CG.

S&F in replacement LED Bulk head 1 x 10 watt energy efficient wall mounted, pressure die cast aluminium housing & enclosed with poly carbonated cover with all accessories including lamp complete including connecting up with three core twisted flexible copper conductor cable of suitable size, all as specified and direted. Make: Cat Part NoHLBH02-10-CW of - CromptonoHalonix or equivalen Havells, philips, Bajaj' Crompton

M&L for Fancy type wall mounted luminaire with chromium plated MS base frame and opal glass shade including 9W LED lamp with all accessories and connecting with ceiling rose using 3 core, 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable and testing etc complete all as specified and directed. Make : Philips Cat Part No 30948 or equivalent of Wipro/Crompton. Note : CA No shall be written on each fitting before installation.

S&F in replacement Heavy duty Exhaust fan, single phase, 220 Volts, 50 Hz, 1400RPM, 300mm sweep with louvers including cutting round opening, through one brick thick masonry wall suitable for exhaust fan by providing, fixing and removing shoring, forming jambs with CM 1:3 and making good disturbed surface to match existing finish and removal of rubbish out off the premises etc complete all as specified and directed. Make : Crompton Model No EXHD300-4-1 or equivalent model of Bajaj/Havells

S&F Double door MCB DB SPN, 240 Volts, 08 Way made out of CRCA powder coated sheets, IP43 protection with copper bus bar including taking out old unsv DB any size/type, complete all as specified and directed. Make: Legrand Cat Part No 6077-11 or equivalent model in L&T/Hager/SCHNEIDER

S&F MCB single pole (SP) 240 volts, 6 to 32 Amps, 10KA (C-series) , complete all as specified and directed.

S&F MCB single pole (SP) 240 volts, 40 to 63 Amps, 10KA (C-series) complete all as specified and directed.

S&F MCB single pole neutral (SPN) 240 volts, 40 to 63 Amps, 10KA (C-series) complete all as specified and directed.

Taking down ceiling fan by disconnecting the electric connection and dismantling the blades and removing from ceiling/roof of bldg by descrewing the nut bolt and Rechanging the same and connecting up including provision of PVC insulated and overall sheathed flexible copper conductor cable 3 core of size 0.50 Sqmm from ceiling rose or connecting to fan complete all as per required and directed by Engr-in-Charge, all as specified and directed.

S&F Single pole & neutral enclosure with a two pin & earth plug & socket complete with one single pole MCB 20 Amps 240 volts (B-series) complete all as specified and directed. Make : Legrand/Schneider/Hager

Supply , laying, testing and commissioning for 1100 volt grade XLPE insulated heavy duty cable, 16 sqmm 2 core, strip armoured with aluminium stranded conductor overall PVC sheathed laid in trenches including taking down existing cable complete all as specified and directed. Note : Excavation & Earthwork shall be measured and paid separately.

Supply and fixing the front polycarbonate glass FR type with transparent acrylic sheet enclosure of size 600x500x170mm suitable for housing the 04 Nos of single phase energy meters after dismantling single phase energy meters flush mounted in wall including cleaning of disturbed area in same position and refixing the dismantled energy meters and making connections including making good the disturbed surface and matching with existing specification complete all as directed. Make : Sintex/Ship/ HPL

Excavation in trenches not exceeding 1.5 Mtr wide & note exc 1.5 Mtr in depth for taking out/laying of under ground cable/erecting of poles/stay in any type of soil complete all as specified and directed by Engr-in-Charge.

Returning & filling in including spreading leveling watering & well ramming in layers not exc 25 CM thick in any type of soil

Removal of surplus excavated material to a distance not exc 50 Mtr and depositing where directed at a level not 1.5 Mtr above the starting point in any type of soil

M & L for sand filling in trenches dry and and clean sand unwashed including punning around cable for protection of under ground cable complete all as specified and directed. [Note : Punned thickness shall be measured and paid]

M & L for well burned bricks , laid flat ( old size) sub class B designation 75 for cable protection complete all as specifed and directed.

S&F GI tubing 40 mm bore light grade laid in trenches/floors/ fixed to wall/poles for protection of cable with necessary fittings and FI clamps duly painted complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode, 600mm x 600mm x 6mm thick, buried directly in the ground (earth pit not less than 2.25m deep below normal (ground level) with top edge of the plate not less than 1.50m below ground level connected to galvanized iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point, HDPE pipe 15mm bore as protection pipe, GI watering pipe 20mm bore light grade with funnel and wire mesh, charcoal and salt, 40mm thick pre-cast RCC (1:2:4) type B-0 (Nominal mix) cover reinforced with XPM (weighing n.less than 4 Kg/Sqm) with suitable steel handle, and angle iron 40X40X3mm frame and chamber of PCC (1:3:6) type C-0 (including earth work in any type of soil, removal of surplus soil to a distance n.exc.50m) and connecting, testing on completion, all as shown on electric plate No. 03 of SSR-2009 Part-I, complete all as directed. Notes: 1. Earth lead & protection pipes length upto & including 7.50 metre is deemed included in unit rate quoted by the contractor. 2. Earth filling shall be done by vegitable soil. 3. Soil shall be free from stone, boulders, aggregate, gravels .

M/S J N TRADERS

M/S CANTILEVER ENGINEERS

M/S HIMANSHU BUILDERS

dadwal engineers

abrol enterprises