GE/BAS-71/2022-23 CERTAIN REPAIR TO JOINERY ROOF PLASTER SANITARY FITTINGS

Amount

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing ,dressed stone work and precast concrete article, complete all as specified and as directed.

M & L walling of random rubble stone maronary uncoursed well bonded, bedded and solidly hearted built in CM (1 : 6) complete all as specified and as directed.

-Ditto- all as per item No -2 above but except stone.

M & L brick work with subclass 'B' bricks straight or curved on plan exc 6.0 mean radius built in CM (1:6) complete all as specified and as directed.

all as serl item No 4 above but except brick

Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against dressed surface not exceeding 40mm (on granite or trap stone) to face stones and dressing of face beds and joints as specified of random rubble walling, uncoursed or brought up to courses complete all as specified and as directed.

M & L flush pointing to random rubble stone masonary, uncoursed in CM (1:4) complete all as specified and as directed.

M & L rendering 15mm thick on stones masonry surfaces or Brick/ Concrete surfaces in CM (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

M&L for two coats of white wash on newly plasteredd surfaces of walls including preparation of surfaces, complete all as specified and as directed.

M & L for PCC (1:4:8), type D2, using 40mm graded stone aggregate, as in foundations filling and mass concrete complete all as specified and as directed.

M & L cement concrete (1:2:4) type B2 using 40mm graded stone aggregate as in drains, beds, and surface channels etc complete all as specified and as directed.

M&L for PCC (1:2:4) type B-0, using12.5mm graded stone aggregate as in coping including necessary from work, complete all as specified and as directed.

M & L for rendering 15mm thick on stones masonry surfaces or Brick/ Concrete surfaces in CM (1:4) finished even and smooth without using extra cement including taking down old cement plaster, complete all as specified and as directed.

M & L rendering 15mm thick on stones masonry surfaces or Brick/ Concrete surfaces in CM (1:4) finished even and smooth without using extra cement complete as in Chajjas /Projection including taking down cement plaster complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

M&L for applying two coats of Apex emulsion paint as in walls/roof projection/chajjas complete all as specified and directed.

M&L for Cement concrete 1:2:4 type B-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

S&F MS works as in fencing posts and struts including cutting tops to bottom shape as directed, drilling holes notching for wire etc flat iron fillets for securing wire mesh etc including all drilling bolting riveting etc and similar works conforming to FE 290 gde E-165, complete all as specified and as directed.

-Ditto- all as per item No -18 above but in Refixing.

Mild steel screw bolt(machine made) with hexagonal or square heads at one end screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut n exc 5 cm long (5 to 10mm dia.)complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer over new steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and as directed.

S & F galvanised 2 strand steel barbed wire 2.24 mm dia barded with 2mm dia bar at 75 mm spacing and straining and fixing to any type of standard rail, standard bolts including securing or tying at crossing with and provn of galvanized mild steel wire staple or steel pins (Each line of wire to be measured) including taking down old barbed wire, complete all as specified and as directed.

M&L for restraining and resecuring of steel barbed wire fencing including making good staples etc complete all as specified & directed (each line of wire to be measured separately) complete all as specified and as directed.

S & F Punched tape concentrina coil of dia of coil 600 mm ,56 loops, 2.5 mm core wire,heavy galvanised ( wire 275 GSM),tensile strength of wire 1400-1500 N/sqmm ,streatchable length 12 mtr including securying or tying at crossing with and provision of galvanised mild steel wire ,staples or steel pins etc complete including taking down old concentrina coil complete all as specified and as directed.

Dismantling structural steel work including doors , gates and any type of angles complete all as specified and as directed.

S&F framed work as in doors or gates of angle or other section with gusset plates ,rails ,braces .etc complete drilled for fixing of steel sheeting or other covering .Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive sttel sheeting) complete all as specified Gde Fe 410-W , complete all as specified and as directed.

S & F 0.80 mm mild steel plain black sheet in wall claddiing steel gates and similar works , cut to size holes punched including round headed screws fixed sttel framing with plain 40 mm lap joints with riveted or welded seams including bending complete all as specified and directed

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete all as specified and as directed.

M&L for 100 mm thick PCC 1:2:4 type B-2, using 40 mm graded stone aggregate,as in subbase, complete all as specified and as directed.

M&L for 50 mm thick sand filling/cushioning as in floor, foundation including watering and consolidation complete all as specified and directed.

M&L machine pressed precast concrete interlocking paver block any shape and size and any colour as approved by GE , confirming to IS 15658- 2006 0f 60mm thickness with grey cement and pigment, M-35 grade complete all as specified and as directed.

M&L for 50mm thick PCC 1:4:8, type D-2 using 40mm graded stone aggregates as in sub bases of floors and pavings, complete all as specified and as directed.

M & L Chequrred cement coloured tiles with grey cement and pigment 30cmx30cmx25mm thick set, jointed in neat cement slurry including CM1:6 complete all as specified and as directed.

M & L for Furastone / Endura heavy duty virtified tiles of any colour as as approved by GE of size 300mmX300mm 8 to9mm mm thick, set jointed and pointed in neat cement slurry in floors with grey cement over 15 mm thick screed bed of CM 1:4 finished cemnt concrete surface fair & smooth without using extra cement complete all as specified and as directed.

M&L for preparing old plastered or unplastered surfaces of walls and applying one coat of white wash, complete all as specified and as directed.

M&L for preparing old plastered or unplastered surfaces of walls and applying one coat of cement based paint, complete all as specified and as directed.

M&L for applying One coat of Apex emulsion paint as in walls/roof projection/chajjas on Old surface, complete all as specified and as directed.

M&L for Mild steel TMT bars 10mm dia cut to length, bent to shape required including crancking bending and hooping ends with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for RCC M-20(using 20mm graded stone aggregate) in manhole cover slabs supported on walls, complete all as specified and as directed.

M&L for form work to manholes cover, soffit of slab n.exc 20cm thick, complete all as specified and as directed.

S & F Precast cement concrete Jallies 25 mm thick (meassured solid) including all mouldings design and shape and size as directed by GE, complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil Bound distemper complete all as specified and as directed including rendering 15 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed. including rendering 15mm thick in cement mortar 1:4 finished fair and even without using extra cement complete all as specified and as directed.

M & L preparing new plastered or unplastered surfaces of walls and applying two coats of white wash including rendering 15 mm thick in CM 1:6 on any surfaces of brick work, finished even & smooth without using extra cement including taking down old plastered surfaces upto height of third Floor complete all as specified and as directed.

M & L two coat of oil bound distemper on new plastered/putty surfaces of walls including rendering 15 mm thick in CM 1:6 on any surfaces of brick work, finished even & smooth without using extra cement including taking down old plastered surfaces upto height of third Floor complete all as specified and as directed.

M & L preparing new plastered or unplastered surfaces of ceiling and applying two coats of white wash in ceiling including rendering 10 mm thick in CM 1:6 on any surfaces of brick work, finished even & smooth without using extra cement including taking down old plastered surfaces upto height of third Floor complete all as specified and as directed.

M & L two coat of cement base paint on new plastered surface of walls including rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement including taking down old plastered surfaces upto third Floor complete all as specified and as directed.

M & L for complete removal of existing treatment on walls/ceiling and making true uniform surfaces by roller by 3mm thick wall care putty on old wall/new plastering surface and one coat of Oil Bound Distemper complete all as specified and as directed.

M & L for preparation of old decorated plastered or un plastered surface of wall and applying one coat of white wash upto Third Floor complete all as specified and as directed.

M & L for preparation of old decorated plastered or un plastered surface of ceiling and applying one coat of white wash complete all as specified and as directed.

M & L for preparation of old decorated plastered or un plastered surface of walls and applying one coat of oil bound distemper upto any height filling the gap or unequal surface with cement mortar /chalk whiting/Putty in any shade complete all as specified and as directed.

M & L for preparation of old decoratede plastered or un plastered surface of wall and applying one coat of cement base paint including scaffolding and filling the gap or unequal surface with cement mortar /chalk whiting/Putty upto Third Floor height, complete all as specified and as directed.

M & L for preparation of old painted surfaces of wood or wood based surface of any description over 10 cm with or girth and painted with one coat of synthetic enamel paint complete all as specified and as directed.

M & L for preparation of old painted surfaces of steel of any description over 10cm width or girth and painted with one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old decorated surfaces of wall and facia and applying one coat weather proof apex paint upto height of Third Floor of any tint etc complete all as specified and directed.

Taking down/ dismantling of broken/loose portion of chajja , facia upto 450mm wide and making good the surfaces with cement mortar 1:3 or PCC 1:1.5:3 including necessary form work/scaffolding and matching with existing surface of facia, (including white wash / colour wash or cement base paint/Apex Paint ) complete all a specified and as directed.

M&L for Plain cement concrete padding 1:2:4 type B-0 (12.5 mm graded crushed stone aggregate) of uniform thickness 50mm, padding shall be furnished even and smooth without using extra cement including demolition of old broken PCC, complete all as specified and as directed.

M& L applying water proofing membrane APP (Atactic Polypropylene Polymer) modified membrane with non-woven polyster reinforcement/mat with thermal insulation of weight not less than 3.6 kg/sqm and thickness not less than 3 mm (reinforced) with polyester Non woven fabric weighing not less than 160 gms per sqm , laid by torch application method with overlap 100 mm on length side and 100 mm on the width side over a solvent based bitumen primer @ 0.3 Ltr Sqm by the same manufacturer conforming to IS:3384-1986 on prepared surfaces including 20 mm thick screed bed in cement mortar (1:4) even and fair & including taking out /demolition of old treatment complete and removal of debrises not exceeding 50 mtr and depositing where directed complete all as specified and directed. NOTE:- work shall be executed by specilized firm or their authorized dealer.

M&L for Non skid ceramic tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jounted neat cement slurry and pointed in white or coloured cement to match Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 including dismantling floor, hearth or wall tiling and cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and as directed .

M&L for Non skid ceramic tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jounted neat cement slurry and pointed in white or coloured cement to match Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 including dismantling floor, hearth or wall tiling and cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and as directed .

M&L for Glazed ceramic tile 450x300x7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick bedding layer in cement and sand mortar 1:4 including dismantling floor, hearth or wall tiling and cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and as directed.

M&L for Granite (of any type), 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform including Moulding, rounding , chamfering and making hole for Gas pipe and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including dismantling old granite slab complete all as specified and as directed.

S&F structural steel work as in roof trusses (framed), trussed purlins, crane gantries, rails and fastening and heavy brackets (Beam, tee, angle, channel or hollow steel section) including distance pieces, cleats etc confirming to Fe-410-W (Gde-E-250) quality B including including two coat of synthetic enamel paint over a coat of red oxide including dismantling wrought iron or mild steel work of any descrfiption not otherwise provided forcomplete all as specified.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated sheet 0.45mm to 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of AC/CGI/Galvalume sheets corrugated or semi-corrugated in roof covering including ridges, hips, valleys and flashings etc including filling the gaps with bricks/ plastering /PCC and painting/whitewashing on it complete all as specified.

Ditto all as per item No 64 here-in-before but plain sheets

S & F in repair Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc fixed in repairs, complete all as specified.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern and pipe) complete fixed in repair, all as specified and as directed.

S & F in repair Plastic Seat Cover white / any colour as per Engr in Charge for Water closet (Pedestaj Pattern) with screws all as specified and directed

S & F in repair PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 90 cm long etc, supplied and fixed in repairs, complete all as specified and as directed.

S & F in repair Vitreous china Urinal, Half stall type, white ( excluding flushing cistern, flush pipe and waste pipe), with grating and union for discharge pipe fixed in repairs all as specified.

S & F in repair Vitreous china wash basin, white, flat back, size 550x400mm including pillar tap, waste fitting chromium plated brass, chromium plated steel chain and rubber plug, porcelain stopper, a pair of CI brackets, waste pipe and pillar tap etc., fixed in repairs complete all as specified and as directed by Engineer-in-Charge.

S & F in repair PVC connection 15 mm size, of length 450 mm, with PTMT nuts supplied and fixed in repairs complete all as specified and as directed.

S & F in repair PVC connection 15 mm size, of length 600 mm, with PTMT nuts supplied and fixed in repairs complete all as specified and as directed.

S&F in repair waste pipe for WHB/Urinal/Sink for 32/40mm dia all as specified & as directed.

S & F 15mm bore tubes, medium grade, galvanised with and including all fittings including concealing to walls, floors, or ceiling or laid in floors etc including taking down old steel GI pipe complete all as specified.

S & F 20 mm bore tubes, medium grade, galvanised with and including all fittings including concealing to walls, floors, or ceiling or laid in floors etc including taking down old steel GI pipe complete all as specified.

S & F in repair Stop valves/angle valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm, supplied and fixed in repairs complete all as specified.

S & F in repair Bib taps, fancy type chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, for bore dia of pipe 15mm, supplied and fixed in repairs complete all as specified.

S & F in repair PVC Bib taps, fancy type PVC , screwed down, screwed for iron pipe , for bore dia of pipe 15mm, supplied and fixed in repairs complete all as specified.

S & F in repair Pillar taps cast copper alloy, fancy type with capstan head, CP, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut, screwed for iron pipe 15 mm bore, supplied and fixed in repairs, complete all as specified.

S&F in repair PVC Float Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) complete all as specified.

S&F in repair PVC Float Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 25 mm dia (minimum weight 210 gms) complete all as specified.

S&F, 110mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S&F Brass chromium plated tubular towel rail, 20 mm dia 'D' type 60 cm long between flanges fixed with chromium plated brass screws and wooden/plastic cleats, complete all as specified and as directed.

S&F brass chromium plated shower rose 125mm size with swivel joints fixed in repairs including fixing to steel pipe or union complete all as specified and as directed.

S&F in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repair waste coupling of (half or full threaded), (32/40mm dia, minimum weight 45gms) for sink / WHB /urinal complete all as specified and as directed.

Supply and fixing in repair stainless steel plate rack 750 x 600 x 230 mm deep with spoon holders , shelves, fix to wall with suitable screws, washers, nut-bolts and necessary drilling etc. Including making good to disturbed portion in cement mortar (1:4) to wall etc , complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete in all as specified and directed.Make Cera/ Jaquar/Parko

S&F in repair Jet Spray (ABS Body) for EWC mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete in all as specified and directed.Make Cera/ Jaquar/Parko

S&F in repair WHB mixer, Brass chromium plated mixer for mixing hot & cold water screwed down for iron pipe and fixed with15 mm bore pipe including all necessary fixing arrangement complete all as specified and directed.

S&F in repair Chromium plated Soap dish, fixed to plugs with chromium plated brass screws complete all as specified and directed.

Supply only accessories (legs,nipple,cup etc.) for CP wall mixer/Basin mixer suitable for 15 mm dia pipe, complete all as specified and directed.

S & F in repair Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including 25 mm Brass Float valve including taking down existing tank complete all as specified.

Rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including 25 mm Brass Float valve including taking down existing tank complete all as specified.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each and removing from site complete all as specified.

Ditto all as item above No 97 ut exc 1.5 Sqm but n exc 4 sqm each

Taking down shutters of any description, area exceeding 1 sqm and not exceeding 2.00 sqm each complete all as specified and as directed.

Taking down and refixing including resecuring and easing shutters area exceeding 1.00 sqm and n.exc 2.00 Sqm each in the same opening complete all as specified and as directed.

S & F Factory made Pressed steel frame for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming including PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame including complete PCC 1:3:6 type C-1 using 20mm graded stone aggregate for hold fast blocks, including necessary form work for rough finished surfaces etc all as specified and as directed.

Ditto all as item above no 101 above but size 125x60

M & L 35mm thick, IInd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified.

M & L 35 mm thick, 2nd class soft wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete all as specified.

M & L Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2004 as specified.

M & L Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II , 2004 as specified.

S&F in repair 18/19mm thick prelaminated interior grade particle board one side with one side decorative choice and other side white lamination fixed with screw as in cupboard/kitchen cabinet shutters fitting including Cupboard hinges , Alu handle , towerbolt, hasp and staple , piano hinges and channel where required size as per dirn of Engr in Charge including taking down of old Cupboard of any type complete all as specified and as directed by Engineer -in-Charge complete all as specified and directed.

S & F Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and as directed.

S & F 250mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified.

S & F 200mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and as directed.

S & F Aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified and as directed.

S & F in repair Door closer of aluminium (Die cast body), hydraulically regulated, designation No 2, universal type, suitable for door shutters of weight between 36 to 60 Kg, ISI marked, complete all as specified and as directed.

S & F 300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete all as specified and as directed.

S&F in repair harrison rails (curtain rails), mild steel chromium plated with fixing brackes, stops, rollers etc. all as specified.

S&F Steel windows/ventilator (Box type) factory made glass/glazed shutter,and including shutter for wire mess and Glass (glass panes and wire mesh shall be measured and paid separately) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills and two coat of synthetic enamel paint over a coat of red oxide including taking down of old windows of any type complete all as specified

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified.

S&F 3 mm thick sheet glass in repair , ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones glazed with oil putty fixed with beads complete all as specified. complete all as specified.

All as per item No 117 here-in-before but figured (frosted) glass.

M & L Galvanized mild steel wire-cloth 0.48 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified.

All as per the description of item No.119 here in before but fixed in repair.

Supply and fix for natural colour anodized aluminium window with frame of size 101.60x44.45x1.60 mm of approved manufacture fixed in position on wall with rawl plug and screws and window shutter as per direction given by Engr in Charge and glass pane 5 mm thick coloured fixed with rubber gasket and beading/glazing clip size 19.00X17X 0.70 mm (weight 0.097 kg /RM of both side), including Grill as proper spacing and suitable aluminium handle, tower bolt hinges and including aluminium flyproof shutter with wiregauge as per direction given by GE including taking down old U/s windows of any type all as specified and directed.

Supply and fix for natural colour anodised Aluminum Door shutters side hung type with safe bars locking rails with inbuilt lock arrangements and Hydraulic door closing arrangements including necessary joining cleats glazing clips rubber packing anodised aluminum snap beading screw suitable handle 150mm size etc and including 5-12mm thick sheet glass fitted type black in any colour, size of lock rails 44.45x81.50mm side rails 85.85x44.45mm, top rail 83.5x44.45mm, bottom rail 150x44.45 and thickness of aluminum member 1.50mm thick including anodized aluminum frame of size 101.60x44.45 and thickness of member 2mm including fitting arrangements complete including taking down old U/s door of any type all as specified and directed.

S & F in position suspended false ceiling system using E - grid suspended ceiling grid system . The size of grid shall be 600x600 mm with GI frame work main runner 38X24 mm cross Tee 25X 24 mm and wall angle 24mmX24mm using 8mm thick ceiling panel laminated with PVC film on front face and foil back availalble in due drop textureas per IS -2095Part-I 1996 fixed in the grid suspended ceiling grid system duly suspended by 4 mm dia GI bar hangers from the purlins of the roof with butter fly clips including dismantling of old celing of any nature all as specified

Repair to steel rolling shutter without or with Ball Bearing/ gear operator type and repair of locks, hold fast etc and repair of any type of accessories as per site requirement and making them openable easily all as specified and directed.

M&L "Steel window factory made double shutter and tubular moulded frame of 16 gauge suitable for double shutter as per drg No CEPZ/TD/245/01 sheet 1/1 and CEPZ/TD/246/01 sheet 1/2 (double for mosquito proof one glazed with glazing bars and one gauged without glazing bars ) with side hung shutters including projecting type hinges non friction with 3mm thick 100mm long handle and two nos tower bolts 100mm long welded on 3.0mm thick MS plate to each window shutter and including hold fast and painting with one shop coat of zinc chrome primer." complete all as specified.

S & F 12 mm Toughened Glass including all accessories like hinges , clips , handle steel etc fitted to bath cabinet and other purpose including hydraulic machine for rolling complete all as specified and directed.

S & F in repair 5mm thick PVC sheet fillet of width 35mm for wall panneling including of fixing on to wall to prepare PVC frame as per specification and manufacturer instruction complete all as specified and directed.

S & F in repair 5mm thick wood grain or other colour printed PVC sheet in strips & channel feathered at the edges for fixing on solid PVC frame to fix as wall lining ,insulated PVC wall lining and solid PVC partitions including of solvent ,Brass screw ,plugs,cement to fix in position at site complete all as specified

Supply & Fix Snack guard 900 mm long complete all as specified and as directed.

Supply & fix Kitchen cabinet /Cupboard SS Hinges Make indaux Product No 399720064 or equivalent ISI mark hinges, complete all as specified and as directed.

Ms International Engineers

Amrik Construction co

Om Sai Ram Builders

Ashoka Engineers