REPAIR /MAINT EXT INCL LT OHT LINES,LT PANELS ,APFC PANELS, MCCBS, EARTHING,UG CABLE ,LTPOLES,STREET /PERIMETER LIGHTS AND CONNECTED WORKS AT SONAMARG (INCL HAWS) UNDER GE 970 EWS

Amount

Excavation in trenches in soft / loose soil not exceeding 1.5 Mtr in wide and not exc. 1.5m in depth for taking out / laying of under ground cable in trenches or cable ducts all complete all as specified and directed.

Excavation in trenches in soft / loose soil not exceeding 1.5 Mtr in wide, exceeding 1.5 m depth and not exc. 3.0 m in depth for taking out / laying of under ground cable in trenches or cable ducts all complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers, not exceeding 25 cm thick in soil after repairing / jointing and laying and testing of cables complete all as specified and directed.

Removing surplus soil to a distance not exceeding 50 Mtr and deposited at a level not exceeding 1.5 mtr above from the starting point complete all as specified and directed.

M&L natural river sand as cushioning of cables including spreading and punning down all as per clause No 19.75 of SSR part -I complete all as specified and directed. Note : punned thickness shall be measured for payment purpose

Supply and lay brick of conventional size 230x110x75mm locallly available as protection of cable in trenches complete all as specified and directed.

M&L PCC 1:4:8 type D2 using graded stone aggregate for foundationof pole complete all as specified and directed.

M&L PCC 1:3:6 type C2 using 40mm graded stone aggregate for filling of pole &stay complete all as specified and directed.

M&L PCC 1:2:4 type B2 using 20mm graded stone aggregate for coping of pole complete all as Specified and as directed

Labour charges for re-laying of serviceable bricks of any size and type recovered during taking out of old cable , over newly laid or re-laid cables all complete as specified and directed.

M&L for cutting existing road / PCC drain for taking out / laying of underground cable and including necessary earth work and making good to match with the existing surface with PCC 1:3:6 type CI using 20mm graded aggregates complete all as specified and directed.

M&L for 50mm dia GI pipe medium grade galvanised for cable protection and sealing both ends including taking out old pipe complete all as specified and directed.

M&L for 80mm dia GI pipe medium grade galvanised for cable protection and sealing both ends including taking out old pipe complete all as specified and directed.

M&L for 100mm dia GI pipe medium grade galvanised for cable protection and sealing both ends including taking out old pipe complete all as specified and directed.

Taking down or out existing cable of sizes 2/3.5/4 core 16 sqmm to 240 sqmm from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal complete all as specified and directed. Note :(1) Excavation / cutting of road or floor/ GI pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule

Supply & Laying XLPE Cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 16sqmm 4 core including necessary cable lugs, glands, insulation tape and deposited to MES store yard complete all as specified and directed.

Description all as per ser item No 16 above but of size 16 sqmm 2 core complete all as specified and directed.

Description all as per ser item No 16 above but of size 25 sqmm 4 core complete all as specified and directed.

Description all as per ser item No 16 above but of size 35 sqmm 3.5 core complete all as specified and directed.

Description all as per ser item No 16 above but of size 50 sqmm 3.5 core complete all as specified and directed.

Description all as per ser item No 16 above but of size 70 sqmm 3.5 core complete all as specified and directed.

Description all as per ser item No 16 above but of size 95 sqmm 3.5 core complete all as specified and directed.

Description all as per ser item No 16 above but of size 120 sqmm 3.5 core complete all as specified and directed.

Description all as per ser item No 16 above but of size 185 sqmm 3.5 core complete all as specified and directed.

M&L straight through joint (Heat Shrinkable) for under ground PVC insulated and PVC sheathed armoured heavy duty XLPE cables with aluminium conductor including jointing kit, including making joints for the cable of size 16sqmm x 4 core cables including testing and commissioining complete all as specified and directed.

Description all as per ser item No 25 above but of size 25 to 50sqmm x 3.5 / 4 core, as per the size of existing UG cable. complete all as specified and directed.

Description all as per ser item No 25 above but of size 70 to 120 sqmm x 3.5 core, as per the size of existing UG cable. complete all as specified and directed.

M&L LT indoor/outdoor end joint (Heat Shrinkable) for under ground PVC insulated and PVC sheathed armoured heavy duty cables with aluminium conductor including jointing kit, including making joints for the cable of size 150/185 sqmm x 3.5 core cables including testing and commissioining complete all as specified and directed.

M&L LT indoor/outdoor end joint (Heat Shrinkable) for under ground PVC insulated and PVC sheathed armoured heavy duty cables with aluminium conductor including jointing kit, including making joints for the cable of size 240-300 sqmm x 3.5 core cables including testing and commissioining complete all as specified and directed.

Supply & replace 250 A 4 pole MCCB, 36 KA, 415V, 50 Hz, AC supply adjustable type of thermal and megnatic setting including necessary cable lugs & wire etc complete all as specifeid and directed.

Supply & replace 250 A 3 pole MCCB, 36 KA , 415V, 50 Hz, AC supply adjustable type of thermal and megnatic setting including necessary cable lugs & wire etc complete all as specifeid and directed.

Supply & replace 200 A 3 pole MCCB, 36 KA, 415V, 50 Hz, AC supply adjustable type of thermal setting including necessary cable lugs & wire etc complete all as specifeid and directed.

Supply & replace 100 A 3 pole MCCB, 16KA , 415V, 50 Hz, AC supply including necessary cable lugs & wire etc complete all as specifeid and directed.

Supply & replace 63 A TP MCCB, 16 KA, 415V, 50 Hz, AC supply including necessary cable lugs & wire etc complete all as specifeid and directed.

Supply & replace digital type Ammeter 96X96 mm square Flush mounted case of class 1.0 complete all as specifeid and directed.

Supply & replace digital type Voltmeter 0-500V, 96X96 mm square Flush mounted case of class 1.0 complete all as specifeid and directed.

Supply & replace CT 400 - / 5A, 200/5A or 100/5A for ammeter complete all as specifeid and directed.

M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galavanised earth strip 32x6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3, connected to earthing point of outdoor panel boards all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber & RCC 1:2:4 type B1 cover 40mm thick, with 8mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 20mm dia GI medium grade pipe for watering , water funnel, complete all as specified and testing on completion.

Supply and fixing in repairs decorative garden light (landscape lighting) made up of high grade unbreakable polycarbonate materials of capacity 9W LED complete all as specified and directed. Make : Bajaj Cat Part No BGBOM 650 9W LED (Tulip) or equivalent/Havells/CROMPTON. Note (i) Contractor shall provide 2 years written manufacturer's warranty for the LED fixture complete including driver from the certified date of completion. (ii) The contractor should include the rates for PCC as required and nut bolts for fixing the light in the quotated rate.

Taking out old unserviceable steel tubular/RCC poles 9 mtr long and supply and erection of steel tublar swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts, screws as specified type 410 SP-31 (9.0 mtr long) and shifting of conductors and insulators etc incl painting the exposed portion of the pole with two coats of aluminium paint over a coat of red oxide primer and internally through out plus embedded portion with two coats of black bituminous paint over a coat of red oxide primer. Marking of pole number with black paint in yellow circle complete all as specifeid and directed.

M & L for Painting of steel tubular pole 9.0 mtr long, by applying one coat of alluminium paint after scraping / brushing and cleaning the rust on pole and cross arms . Alluminium painting will be done on pole above 1.5 Mtr hight from ground level and balance 1.5 mtr from ground level will be painted by alternate layer of black and white enammelled paint ( 30 cms each) Pole Nos will be written on pole by black paint in yellow circle of 150mm dia acomplete all as specifeid and directed.

Supply and installation of off load change over switch in sheet metal enclosure of capacity 4P 63 Amps, ccomplete all as specifeid and directed.

Supply and installation of on load change over switch in sheet metal enclosure of capacity 4P 100 Amps, complete all as specifeid and directed.

Supply and installation of on load change over switch in sheet metal enclosure of capacity 4P 200 Amps, complete all as specifeid and directed.

S & F in replacement of Integral LED street light luminaires complete comprising of epoxy powder coated housing, enclosed with glass cover in front having 6000 lumen/60 watts output mounted on MCPCB in gress protection IP-66 complete all as specified and as directed.

S & F in replacement of Integral LED street light luminaires complete comprising of epoxy powder coated housing, enclosed with glass cover in front having 9000 lumen/90 Watts output mounted on MCPCB in gress protection IP-66 complete all as specified and as directed.

Supply and fixing in replacement of LED driver suitable for upto 6000 lumen lumanaries complete all as speified and directed.

Supply and fixing in replacement of LED driver suitable for upto 9000 lumen lumanaries complete all as speified and directed.

S&F in repair of 1.5 sqmm 3 core pvc insulated flexible copper conductor wire from street light terminal box to fittings of required length drawn through and including PVC conduit of suitable size or complete all as specifeid and directed.

Supply and fix cable junction boxes in repairs of IP 66 protected “halogen free and weather proof” suitable for out door type ( with metric knockouts for cable entry) of size 250 x 250 x 160 mm incl 01 No MCB SP 6 amp and having backelite connecting terminals mounted on saddles suitable for 3 phase with neutral system - 04 Nos of suitable length and thickness and connecting the incoming & out going LT cable connections in the terminal block of junction box and fixing clamps made up of GI flat of size 20 x 3 mm of suitable length-02 Sets, incl GI nut and bolt and washers on poles complete all as specifeid and directed.

Notes :- Amount of Credit Schedule for Schedule 'A' Part-ll shall be deducted from total quoted amount of BOQ to arrive at the contract sum

M/s Bashir Enterprises (BID ID -3439459)

M/S Noor Mohammad Shalla (BID ID -3434053)

M/S Manzoor and Co (BID ID -3434557)

M/S ABDUL KARIM RATHER (BID ID -3439981)

M/s Nasir Rasool Dar (BID ID -3433309)