Construction of 8 Nos Type II 2 Nos Type III 2 Nos Type IV Residences and related civil works at 220 KV Ss Sangipur Pratapgarh

Amount

Excavation in foundation in ordinary soil (Loam Clay or Sand) including lift upto 1.5m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation work. (CSI No. 4.01)

Sand filling in plinth including supply of necessary quantity of fine sand from outside the UPPTCL premises including watering, dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of work.(CSI No. 4.05

Earth filling under floors and/or sub station area including cost of earth when obtained from with in 8 km outside UPPTCL area including its roylty and carriage including watering, ramming in 20 cm layers and dressing of earth etc. all complete. (CSI No. 4.10)

Concrete with 4cm gauge stone ballast, coarse sand (F.M. 1.8 to 2.5) & cement in proportion of 12:6:1 in foundations &under floors including supply of all materials, labour and tools and plants etc. required for proper completion. (CSI No. 5.02)

Concrete with 4 cm gauge stone ballast (class 150mm) coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 8:4:1 in foundation & under floors including supply of all materials, labour & T&P etc. complete. (CSI no. 5.04a)

Cement concrete with 2cm gauge approved hard stone ballast, coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 3:1.5:1 including supply of all materials, labour,side shuttering if required and T&P etc. required for proper completion of work (CSI No. 5.21)

RCC work with cement approved coarse sand (F.M. 1.8 to 2.5) & 2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from Dalla, Jhansi or other quarries and approved coarse sand in proportion 1:1.5:3 in raft foundation & footings, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour & T&P (CSI No. 5.27)

Precast cement concrete door sills, chaukhats boundary posts, shelves and similar small work with cement approved coarse sand (F.M. 1.8 to 2.5) and 2 cm gauge graded approved hard stone ballast in the proportion 1:1.5:3, excluding reinforcement but including fixig the same in position including cost of all other material, labor and T&P . (CSI No. 5.22)

RCC work with cement, approved coarse sand (FM 1.8 to 2.5) and 2cm gauge graded approved hard stone ballast in proportion 1:1½:3 in RCC lintel of doors & windows excluding supply of reinfor-cement and its bending but including its fixing and binding the same with 24 BWG G.I. binding wire and including necessary centering & shuttering including supply of all materials, labour and T&P etc. required for proper completion of work. (CSI no. 5.23)

Same as above CSI No. 5.23 but for slabs with CHOPAN coarse sand. (CSI No. 5.24)

Same as above CSI No. 5.23 but for Lighter Beam Having span upto 6.00 m with CHOPAN coarse sand. (CSI No. 5.25)

Same as above CSI No. 5.23 but for RCC T beam-slab and column. (CSI No. 5.29)

First class brick (class-150) work in 1:6 cement and coarse sand (F.M.1.8 to 2.5) mortar in foundation and plinth including supply of all materials, labour & T&P etc. required for proper completion of work. (CSI No. 6.01)

First class brick (class-150) work in 1:4 cement and coarse sand (F.M.1.8 to 2.5)mortar in S/S thickness of wall not to be less then 1 brick (230mm) thick including supply of all materials, labour and T&P etc. required for proper completion of work. (CSI no. 6.03+6.07+6.08 )

First class brick work in 1:4 cement and coarse sand (FM 1.8 to 2.5) mortar in superstructure including necessary cutting, & moulding of bricks as required & also including honey comb brick work thickness of wall not to be less then 1/2 brick (115mm) including supply of all materials, labour & T&P etc. required for proper completion of work (CSI no.6.03+6.07+6.09)

First class brick work in 1:4 cement and coarse sand (FM 1.8 to 2.5) mortar in superstructure including necessary cutting, & moulding of bricks as required & also including honey comb brick work thickness of wall not to be less then 1.5 brick (345 mm) including supply of all materials, labour & T&P etc. required for proper completion of work (CSI no.6.03+6.07)

S/F of 32 mm. thick Shisham wood fully glazed door & window shutter including supply and fixing of wooden cleats and stoppers and including fixing & adjustment of hinges bolts, locks, handles, springs and/or other fittings but excluding their supply & including fixing the glass panes with putty and necessary screws (Glass panes to be 4 mm thick.)(CSI No. 8.27+8.62)

S/F of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made) commercial quality to I.S.2202 part-1 (1983) ISI marked including fixing of wooden cleats and stoppers and including fixing & adjustment of hinges,bolts.locks,handles, springs and other fittings but excluding their supply including all materials, labour & T&P etc. required for proper completion of work. (CSI No. 8.57+8.61)

S/F 24 gauge annodized aluminium sheet of approved quality including cutting, wastage and fixing the same over the wooden door shutters with nails with all material, labour and T&P. (CSI No. 8.63)

Mild Steel or Iron work in heavy sizes such as trusses built up gates, door frames, record, racks roof work gates etc. wrought to required form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor. (CSI No. 9.01)

TMT/Tor steel in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (Steel shall be arranged by the contractor) (CSI No. 9.03)

Supply and fixing galvanised mosquito proof jali (16x24 gauge) with M.S. flat of 20 x 3 mm. size, on both sides screwed or welded to window or door frame. (CSI No. 9.18)

S/F welded wire mesh size 75x25mm and rectangular made out of 10 SWG over M.S. angle frame with M.S. flat welded as required including cost of drilling holes, washer welding etc as required including cost of all material, labour and T&P etc. required for proper completion of work . except cost of M.S angle and flat. (CSI No. 9.22)

P/F 1 mm.thick M.S. sheet garrage door with frame of 40x40x6mm angle iron, diagonal bracings with 50x5 mm flat and 5 mm thick M.S. gusset plates at the junctions and corners including supply and fixing of necessary fitting, 2 no lock rail of 16 dia,375 mm long and including pintel hooks at the top and bottom, applying a priming coat of red oxide paint on all sides complete . (CSI No. 9.34)

12 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand(1:4),minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work. (CSI No. 11.07)

12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand(1:6),minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work. (CSI No. 11.09)

2 cm. thick cement plaster in dado or skirting in 1:2 consisting of one part of cement and two parts of approved coarse sand laid in panels finished with 3mm.floating coat of neat cement or cement and marble dust in ratio of 5:1 including supply of all materials, labour & T&P etc. required for proper completion of the work. (CSI No.11.13)

S/mixing approved water proofing compound (CICO,DR FIXIT etc) in cement mortar in plaster or concrete work in the proportion as recommended by the manufacturer. (CSI No. 11.15)

Providing (12x15) mm section groove in plaster including all material, labour and T&P etc. required for proper completion of the work. (CSI No. 11.16)

6 mm. thick plaster with 1:3 cement & coarse sand including labour, materials & T&P etc. required for proper completion of the work. (CSI No. 11.17)

3 mm thick floating coat of neat cement finish including supply of all materials, labour and T&P etc. required for proper completion of the work. (cement consumtion 0.044 bag/Sqm) (CSI 11.20)

2.5cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC (CSI No. 12.02)

4.0 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC (CSI No. 12.04)

Supply and Laying 8 mm thick glazed floor tiles of Somany, Johnson or equivalent make, of size 300x300 mm, laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and T&P etc. completion required for proper completion of the work. (CSI No. 12.11)

Same as CSI No. 12.11 but for 6 mm thick glazed floor size 200x300. CSI No. 12.12

Providing and fixing glass strips of 3.15 mm thickness & 25mm depth in joints of floor and skirting at the time of laying floors, flush with floor level including supply of all materials, labour& T&P etc. completion required for proper completion of work. (CSI No. 12.13)

Providing and laying floor of 8 mm thick vitrified tiles in flooring or skirting of approved brand (Bell, Johnson or equi. make) size of 600x600 mm of approved shade, colour and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cement mixed with pigment to match the shade of tile including cost of all material, labour and T&P required for proper completion of the work. (CSI No. 12.18)

Same as CSI No. 12.18 above but for fixing 8 mm thick vitrified tiles in flooring or skirting with adhesive of approved quality on existing smooth floor including cost of all material, labour and T&P required for proper completion of the work. (CSI No. 12.19)

Providing and laying of 16 mm thick granite ( black/ brown) in flooring or skirting ,of approved shade, colour,size and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cement mixed with pigment to match the shade of granite floor including cost of all material, labour and T&P required for proper completion of the work, as per direction of Engineer incharge. (CSI No.12.20)

Painting and varnishing on new wood, or new iron work with one coat of ready mixed priming paint and one coats of approved ready mixed paint (Luxol or equivalent brand or varnish) including supply of all materials, labour &T&P etc. required for proper completion of work (CSI 13.01)

Same as CSI No. 13.01 above but for every coat after first coat. (CSI No. 13.02)

One priming coat and one coat oil bound distemper on new work including supply of all materials,labour and T&P etc. required for proper completion of the work. (CSI No. 13.08)

Same as CSI no. 13.08 above but for every coat after first coat. (CSI No. 13.09)

Finishing walls with water proof cement paint of approved made like "Super Snowcem" or equivalent quality on new work with two coats to give an even shade including supply of all materials, labour etc. required for proper completion of work. (CSI No. 13.17)

Same as CSI No. 13.17 above but for every coat after first two coat. (CSI No. 13.18)

Applying Birla or equivalent putty on new interior or exterior surface over 1 coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of E I/C including cost of all material, labour, T & P etc required for proper completion of work. (CSI No. 13.20)

Applying Birla or equivalent putty on previously birla putty smoothen surface over 1 coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of E I/C including cost of all material, labour, T & P etc required for proper completion of work. (CSI No. 13.21)

Painting one coat with APEX or equivalent brand weather coat paint on new wall surfaces (well prepared with Birla putty and one coat of primer ICI or equivalent which shall be paid separately) including thorough washing with water including cost of all materials, labour, T&P required for proper completion of work. (CSI No. 13.22)

Same as CSI No. 13.22 above but for every coat after first coat. (CSI No. 13.23)

Painting one coat of Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint (Paint and water in the ratio 1:1 by volume) over prepared and primed surface of cement concrete, cement plaster and bricks including all labour, material and T&P etc required for proper completion of the work, (preparation of base with Birla putty etc. and a coating of primer shall be paid extra) . (CSI No. 13.25)

Same as CSI No. 13.22 above but for every coat after first coat. (CSI No. 13.26)

White washing three coat including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 14.03)

Supply and plantation of approved 2 years old plants duly planted in earthen Gamla of approximate size 300x 300 mm nominal size, filled with compost manure and sand mixed in approved proportion including cost of approved quality earthen gamla, compost manure, sand all other materials, labour and T&P etc reqd. for proper completion of work. (CSI No. 23.08)

As in item no 53 above but in mosaic gamla. (CSI No. 23.09)

Supply and planting seasonal flower plants such as Genda, Rose, Ostar, Flox, Guldawadi,Gulmehndi, Cochia etc. including digging hole of proper size, manure and treatment with proper chemical etc., including cost of fertilizer, manure, all materials, labour and T&P etc complete in allrespects. (CSI No. 23.10

Supply and planting permanent ornamental plant like Croten, Varil pristal, Glodulus, Lily, Fern, Bogenbelia etc. including cost of plants, manure, pesticides, fertilizer, labour and T&P etc complete also including preparation of flower bed. (CSI No. 23.11)

Supply and planting Ashoka, Pendula, Mango, Neem,Peepal,Sheesham etc in pits including cost of all materials, labour and T&p etc complete in all respects.(Cost of digging pit shall be paid separetely as per item no. 23.08) (CSI No. 23.12

Supply and planting Desi Doob grass in lawn including cost of Doob, fertilizer, manure,labour, T&P and preparation of bed complete in all respects. (CSI No. 23.13)

P/F15 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross,clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.01a)

Same as CSI No. 26.01a above but for 20 mm dia. (CSI No. 26.01b)

Same as CSI No. 26.01a above but for 25 mm dia. (CSI No. 26.01c)

Providing & fixing half turn 15mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.05a)

Same as CSI No. 26.05a above but for 20 mm dia. (CSI No. 26.05b)

Same as CSI No. 26.05a above but for 25 mm dia. (CSI No. 26.05c)

P/F PVC BALL FLOAT VALVE 15 mm dia. WITH BRASS & UNION COMPLETE, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.06a)

P/F PVC CONNECTION PIPE, 300X15 with 2 brass units ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.09a)

P/F BRASS STOP COCK, 15 mm dia ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.14a)

P/F CP Brass bib cock 15 mm dia.heavy quality (200gm) (L& K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour& T&P required for proper completion of work.(CSI No. 26.16b)

P/F of 110 mm dia PVC pipe of 6 Kg/Sq.cm for the with special such as tee bend, socket, elbow etc includng supply of all labour, material, T& P etc. Complete requeired for proper completion of work. (CSI No. 26.17)

P/F of 110 mm dia PVC pipe of 4 Kg/Sq.cm for the with special such as tee bend, socket, elbow etc includng supply of all labour, material, T& P etc. Complete requeired for proper completion of work. (CSI No. 26.18)

P/F first quality white glazed "Orissa" pattern W.C.Pan Hindustan, Cera make. size 580 mm.(Hindustan,Care Make) with out "P" trap including supply of all materials,labour and T&P etc.complete. (CSI No. 27.01)

As in CSI no. 27.01 but of European type. (CSI No. 27.02)

P/F PLASTIC SEAT COVER COMPLETE WITH PLASTIC LID FOR EUROPEAN TYPE WC ISI MARKED including supply of all materials, labour and T&P etc.complete. (CSI No. 27.04)

P/F flat back 465 mmx 355 mm x 265 mm. size lipped front urinal basin of white glazed earthern ware first quality (Hindutan, Neycer make) I.S.I. marked including supply of all materials,labour and T&P etc. required for proper completion of the work. (CSI No. 27.05)

P/F DIVISION PLATE 600X300 mm WHITE GLAZED FOR URINALS I.S.I. marked including supply of all materials,labour and T&P etc. required for proper completion of the work. (CSI No. 27.07)

P/F 510X400 mm wash hand basin of white glazed earthern ware first quality I.S.I. marked (Hindustan,Neycer / Cera make) including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.09)

P/F for 10 littres low level PVC flushing cistern COMPLETE WITH ALL FITTINGSincluding supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.12)

P/F in position 32 mm. dia P.V.C. WASTE PIPE FOR WASH BASIN. including supply of all materials,labour and T&P etc. required for proper completion of the work. (CSI No. 27.14)

P/F 600 mm x 450 mm beveled edge mirror of Atul,Kiran makeglass with Indian polish 6.50 mm thick complete with back of 600 mm x 450 mm x 6 mm hard board sheet fixed to wooden cieats with C.P. brass screws and washers including supply of all materials, labour and T&P etc.required for proper completion of the work. (CSI No. 27.15)

P/F 750 mm x 20 mm size C.P. brass towel rail of approved quality including brackets including supply of all materials, labour and T&P etc. required for proper completion of the work and cutting and making good the wall plaster etc. required for work. (CSI No. 27.16)

P/F soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials,labour and T&P etc.required for proper completion of the work. (CSI No. 27.19)

P/F M.S. holder bat clamps of approved design including supply of all materials,labour and T&P etc. required for proper completion of the work for 100 mm. dia pipe. (CSI No. 27.20a)

S/P CP Nahani PVC Trap 100 mm dia India make of heavy approved quality complete with CI grating, including supply of all materials,labour and T&P etc. required for proper completion of the work. (CSI No. 27.21b)

P/F 100 mm dia PVC "P" or "S" trap including cement concrete and all materials, labour cartage T&P etc.required for proper completion of the work.(For W.C.) (CSI No. 27.24)

Providing and fixing Stainless Steel sink 610x450x200 mm Heavy Quality( ISI MARKED ) including all materials, labour cartage T&P etc.required for proper completion of the work. (CSI No. 27.26)

Wiring point for light with 1.5 sq. mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire, GP Box, piano type switch and ceiling rose/angle/batten holder on 3mm thick phenolic laminated backelite sheet etc,complete in all respects,as directed, including maching colour wash.(PWD ELESCH.2018,131C)

Same as item No.86 but for two way (PWD ELE. SCH.2018, 132C)

Same as item No.86 but for fan / fresh air fan (light duty exhaust fan).(PWD EL. SH.2018,133C)

Same as item No.86 but for plug.(PWD ELE. SCH.2018,134C)

Same as item No.86 but for call bell (PWD ELE. SCH.2018,135C)

Supply and fixing and concealing of 25mm dia 2 mm thick PVC conduit pipe with ISI marked embossed and with PVC accessories confirming to IS 3419 for drawing wires duly sealed at joints with original resin/adhesive to make the complete piping rigid, plastering with cement sand mortor finished to the level with matching colour wash including supply of all materials, labour and T&P etc.required for proper completion of the work.(PWD ELE. SCH.2018,149A)

S/F of 2/3/4 ways round steel junction box confirming to ISS for 25mm dia 16 guage (1.5mm) thick pvc conduit concealed in wall, keeping its level upto plaster duly provided with proper size cover screwed as directed at site by Engineer-in-charge with supply of all material, labour & T&P etc. required for proper completion of work. (PWD ELE. SCH. 2018,155A)

S/F of switch box 100x100x50 mm size of approved make made up of 1.0mm thick ISI Marked GP Sheet all 4 corners folded & spot welded for screw&holesplugged with pvc Nylon caps.Two or more holes for pipe entryof 25.4 mm on upper and lower size of the box.Holes should be semi-shuttered type fitted with heavy brass earth pillar duly screwed and brand name should be embossed.Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar including matching colour wash with s/o all materials, labour and T&P required for proper completion of work as directed at site by the E/I. (PWD ELE. SCH.2018,159)

Same as item 93 but for 150x150x65 mm size. (PWD ELE. SCH.2018,160)

Same as item 93 but for 200x250x65 mm size (PWD ELE. SCH.2018,162)

Supply and wiring of submains with 2 nos. 2.5 sq.mm & with 1 no earth wire of 1.5 sq.mm FR PVC insulated 1100V grade insulated multistrand single core copper conductor cable in existing PVC conduit pipe complete,including supply of all materials, labour and T&P etc.required for proper completion of the work . (PWD ELE. SCH.2018,291)

Supply and wiring of submains with 2 nos. 4 sq.mm & with 1 no earth wire of 2.5 sq.mm FR PVC insulated 1100V grade insulated multistrand single core copper conductor cable in existing PVC conduit pipe complete,including supply of all materials, labour and T&P etc.required for proper completion of the work. (PWD ELE. SCH.2018,291A)

Supply and fixing of 32 Amp.240 V DP metal clad rewireable type switch fuse unit on MDFEG/Teak wood board including making connections etc.complete all respect.(PWD ELE. SCH.2018,305)

S/ burying of 600 x 600 x 3 mm copper plate vertically for earthing with its top at least 3 mtr. below ground level complete with 20 mm dia G.I. Pipe and funnel for watering and one earthing lead of one no. 8 to 10 S.W.G. copper wire in 15 mm dia G.I. pipe upto switch board (from apron to switch board the cost of G.I. Pipe and copper wire will be extra) 30 cm sq. C.I. frame with hinged cover masonary housing alternate layer of charcoal /coke & salt at least 150 mm thick alround etc.complete in all respects. (PWD ELE. SCH.2018,704)

S/F of one number 8 SWG G.I. wire in15mm dia G.I.pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand,labour,T&P and other materials, labour and T&P etc.required for proper completion of the work.(PWD ELE. SCH.2018,721)

S/F of 0.5 to 5.0 Amp. SP MCB of approved make including making connections etc.complete all respect. (PWD ELE. SCH.2018,1001)CAT A

S/F of 6 to 32 Amp. MCB of approved make and as per sample approved by E/I (10KA)(PWD ELE. SCH.2018,1002) CAT A

S/F of 40 Amp. SP MCB of approved make including making connections etc.complete all respect. (PWD ELE. SCH.2018,1003a) CAT A

S/F surface/flush mounting 4 ways SPN distribution board without MCB complete in all respect as per direction of E/I. (PWD ELE. SCH.2018, 1022) CAT A

Supply and fixing of call bell of approved make on polished MDFEG/ teak ply board including making connections etc. complete all respect.(PWD ELE. SCH.2018,1101)

S/F hexagonal /Round GP fan box of approved make made up of 1.00 mm thick ISI Marked GP sheet spot welded four to eight holes of 25.4 mm for pipe entry of the box .Holes should be semi- shuttered type with 0.5 mm GP sheet upper & lower cover duly screwed fitted with 300.00 mm round zink coted MS barX 12 MM& brand name should be embossed .Fixing with wiring conduit laid in the RCC roof before concreting along with supply of all materials labour and T&P etc. required for proper completion of work.(PWD ELE. SCH.2018,1149)

S/F of Designer ceiling Fan of Crompton make 1200 mm sweep of wing &370 RPM orequivalent make in white/brown/ivory colour as per direction of Engineer Incharge.(NSI) Approved

S/F of Ventilating Fan in Non-Metalic range of Crompton make 250 mm sweep of wing & 1250 RPM orequivalent make in approved design & colour as per direction of Engineer Incharge.(NSI) Approved

S/F Bajaj Make LED Tubelight 4'' length incld. All labour' T& P for proper comletion of work.(NSI)

K.G. CONSTRUCTION

JMD INFRASTRUCTURE

PROFICIENT WORKING ZONE

Satyam construction