CERTAIN B/R WORKS AT AF STN DINJAN UNDER GE (AF) MOHANBARI

Amount

M&L for brickwork with subclass'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for brickwork with subclass'B' bricks, straight or curved on plan exc 6m mean radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces with out extra cement in cement mortar 1:6 complete all as specified and directed.

M&L for two coat of oil bound distemper over a coat of wall care putty (3mm)with even and smooth finish over prepared surface of wall complete all as specified and directed.

M&L for two coat of dust proof oil bound distemper over a coat of wall care putty (3mm)with even and smooth finish over prepared surface of wall complete all as specified and directed.

M&L for two coat of non reflective-black colour oil bound distemper over a coat of wall care putty (3mm)with even and smooth finish over prepared surface of wall complete all as specified and directed.

M&L for three coat of white wash over prepared surface of wall complete all as specified and directed.

S&F for Virified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over bedding layer of mortar 20 mm thick for laying floor finishes as cement mortar 1:4 screed bed complete all as specified and directed.

S&F for Virified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical faces etc. set and jointed in neat cement slurry and pointed in white or coloured cement, over 10mm screed bedding layer in 1:4 cement mortar complete all as specified and directed.

S&F for Coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick backing coat in cement mortar 1:4 on fair face of brick or concrete surface complete all as specified and directed.

M&L for Granite (of any type) 18-20mm work (table rubbed and polished in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for cement concrete type E2 1:5:10 (40mm graded stoene aggregate) as in sub base/floor complete all as specified and directed.

M&L for cement concrete type B2 1:2:4 (40mm graded stone aggregate) as in sub base/floor complete all as specified and directed.

M&L for RCC M25 Beams, cantilevers, bressummers, lintels & lintel bends over 1.5m span as per specifications and drawing complete all as specified and directed.

M&L for RCC M25 Slabs supported on walls, beams and columns in floors, roofs, landings,balconies, canopies, deck slabs and in shelves as per specifications and drawing complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as detailed in Drg complete all as specified and directed.

M&L for Mild steel TMT bars 6mm and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as detailed in Drg complete all as specified and directed.

M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia cut to length, bent to shape required in stirrups, spacers and binders,with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as detailed in Drg complete all as specified and directed.

S&F for Anodised aluminium frame for doors, windows, ventilators & Partition wall with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed.

S&F for 12mm Prelaminated particle board, interior grade, prelaminated both side decorative choice lamination fixed with aluminium frame work in partition wall as per TD AF/TD/241/15 SHEET 1 to 3 complete all as specified and directed.

S&F for 6mm Sheet glass, ordinary quality and glazing fixed with aluminium glazing clip and ruber gasket in square exc 0.5 sq. m in each pane and fixed complete all as specified and directed.

S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F for Extruded aluminium alloy handles Size of handle 100 mm, fabricated type, anodised complete all as specified and directed.

S&F for Butt hinges Size of hinges 100 mm, heavyweight, cold rolled mild steel and fixed complete all as specified and directed.

S&F for Aluminium anodised, barrel tower bolts Length of bolt 150 mm of ex?truded section and fixedcomplete all as specified and directed.

S&F for Aluminium 4 lever Mortice lock, vertical type, size 100 mm fixed complete all as specified and directed.

S&F for Steel rolling shutters, thickness of lath 1.25mm with out ball bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete, gear operated type with bevel gear box and crank handle complete all as specified and directed.

M&L for 2.5mm thk Rubber tiles with fabric backing or insert, plain coloured or marble topping, matt or glossy, laid in floors with approved adhesive complete all as specified and directed.

M&L for 2mm thk ESD (Electro Static Discharge) laid in floors with approved adhesive(excluding copper strip) complete all as specified and directed.

M&L for Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for two coat of sythetic enamal paint over one coat of red oxide primer on structural steel on new surfaces complete all as specified and directed.

S &F for Vitreous China squatting pan of pattern “long pan”, size 630mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F for Plastic water closet seat, black, closed pattern withm flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F for PVC valveless, syphonic action type, flushing cistern(10L), low level, white, with inlet, ball valve, float and handle including Fixing complete all as specified and directed.

S&F for Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F for 5 litres cast iron automatic flushing cistern, including fixing complete all as specified and directed.

S&F Vitreous china urinal partition white of size 310x700 mm complete all as specified and directed.

S&F for Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed.

S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. (Minimum weight 190gms)

S&F for Vitreous China wash basin, angle back, size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F for sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F for Bib taps 15mm dia, cast copper alloy with crutch or butterfly handle, chromium plated, screwed down, screwed for iron pipe or for brass ferrule andfixed complete all as specified and directed.

S&F for Pillar taps (15mm dia), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F for Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, fancy type, chromium plated with long shank and cup (concealed type), screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

M&L for GI tubes medium grade 15mm dia, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

M&L for GI tubes medium grade 20mm dia, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed floors or trenches 75mm dia including pipe complete all as specified and directed.

S&F for PVC (SWR) bend any radius with access door suitable for 75mm dia pipes complete all as specified and directed.

S&F for Cast iron 100 mm soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

S&F for Cast iron 100 mm Bends (any radius), diminishing pieces or tapers complete all as specified and directed.

M/S CHAKRA GOHAIN (BID ID -3375290)

M/S RK Trading (BID ID -3375508)

M/S DURGA CONSTRUCTION & CO (BID ID -3375115)

KP GHOSH AND CO (BID ID -3375328)

pintoo construction (BID ID -3375848)

S K ENTERPRISE (BID ID -3375906)

R K CHAKRABORTY AND CO (BID ID -3376163)