SPECIAL REPAIR TO RCC PILLAR BARBED WIRE SECURITY FENCING AND PROVN OF OFFICE STORE 03 X COLLAPSIBLE GATE HIGH MAST LIGHT WITH 08 X LED LIGHTS FLOOD LIGHT AND BLDG SECURITY LIGHT AT VARIOUS LOCATIONS UNDER AGE EM AND AGE BR I OF GE BENGDUBI

Amount

Excavating in trenches in soft/loose soil n. exc 1.5m wide and n. exc1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10sqm on plan and n.exc 1.5m in depth and getting out. in soft/loose soil complete all as specified and directed.

Excavating in trenches in soft/loose soil n. exc 1.5m wide and n. exc1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10sqm on plan and exc 1.5 m n. exc 3.0 m in depth and getting out. in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Excavating in post holes( or similar holes) each n exc 0.50 cum , getting ut,returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/ loose soil complete all as specified and directed.

M&L for sand cushioning for protection of underground cable, consolidated and compacted with clean dry sand complete all as specified and directed.

M&L for Sand filling under floors or in foundation including watering and consolidated and compacted with clean dry sand complete all as specified and directed.

Removing excavated material (soil) n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

M&L for hardcore of gauge n.exc. 63 mm,with broken stone and boulder, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfaces complete all as specified and directed.

M&L for cement concrete type D2, 1:4:8 using 40mm graded stone aggregate as in foundations filling and mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C2, using 40mm graded stone aggregate, as in foundation filling & mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B2, using 40mm graded stone aggregate, as in foundation filling & mass concrete complete all as specified and directed.

M&L for reinforced cement concrete design mix M 25 grade using 20 mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete design mix M 25 grade using 20 mm graded crushed stone aggregate as in chajja , shelves and like etc. complete all as specified and directed.

M&L for reinforced cement concrete design mix M 25 grade using 20 mm graded crushed stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for reinforced cement concrete design mix M 25 grade using 20 mm graded crushed stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed complete all as specified and directed.

Supply only integral water proofing compound liquid grade conforming to IS-2645 complete all as specified and directed. (Pidiproof of Dr.fixit or equivalent)

M&L for brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for brickwork with old size fly ash bricks, straight or curved on plan to any radius as in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

Making good under cills or over arches, lintels and bressummers. including all pinning in cement mortar 1:6 when necessary complete all as specified and directed.

M&L well burnt old size sub Class ‘B’ bricks, laid flat, in trenches for cable protection complete all as specified and as directed by the Engineer-in-Charge.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical to rough finished surface complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping) rough finished surface flat complete all as specified and directed.

M&L for formwork to chullah hoods, chajjas, troughs and similar items in cluding edges complete all as specified and directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished surfaces of concrete, square, rectangular or polygonal in shape complete all as specified and directed.

S&F 35mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and direcetd.

S&F 150mm size aluminium handle cast type complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete all as secified and as directed

M&L for MS framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc. 22.5cm and n exc 30cm long and dia of neck from 11mm to 15mm complete all as specified and directed.

M&L for Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for TMT bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc conforming Fe-410W(GdeE-250) quality -B complete all as specified and directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe -410-W(Gde-E-250) quality-B. complete all as specified and directed.

S&F in reapir Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. (each line wire to be measured)

S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc.,as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.

S&F steel window with side hunge shutters including projecting type hinges with steel handle and steel peg stey, tower bolts etc. complete with glazing bars dovetailed or welded complete all as specified and directed.

S&F steel window with side hunge shutters including projecting type hinges with steel handle and steel peg stey, tower bolts etc. complete without glazing bars dovetailed or welded complete all as specified and directed.

M&L for 1.25mm thick pressed steel door frame of size 105mm x 60mm with one or more rebates including necessary fixing lugs , hinges, lock strike plate etc complete all as specified and directed.

S&F Pre- painted coloured trapezoidal profiled Galvalume/ Zincalume sheet with min thickness 0.50mm TCT confirming to IS - 513(AZ-150 GSM, Al Zn allay metalic coating with 550 Mpa yield stress as per AS-1397) as in roof covering/cladding to wall, fixed with self tapping screws colour exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer , all fixed with galvanized self drilling self tapping fastner (12-14 x 55 with EPDM seals) complete all as specified and directed.

S&F Pre- painted coloured plain sheet Galvalume/ Zincalume sheet with min thickness 0.50mm TCT confirming to IS - 513(AZ-150 GSM, Al Zn allay metalic coating with 550 Mpa yield stress as per AS-1397) as in roof covering/cladding to wall, fixed with self tapping screws colour exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer , all fixed with galvanized self drilling self tapping fastner (12-14 x 55 with EPDM seals) complete all as specified and directed.

M&L for 40mm thick PCC type B-1, 1:2:4 using 20mm graded stone aggregate as in flooring and finished the cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick PCC type C2,1:3:6 using 40mm graded stone aggregate as in sub basefloor/plinth etc complete all as specified and directed.

M&L for two coats of synthetic enamel paint over one coat of red oxide on new steel surfaces of any description over 10cm in width or girth including preparation of surfaces complete all as specified and directed.

M&L for 40mm dia GI pipe Light grade with all necessary fittings laid in trenches, fixed to wall/pole/under road/floor etc for cable protection complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground Posts embedded in Concrete, brick work, masonry, etc complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in two layers 10mm +5mm in cement mortar 1:4 on external surfaces of brick work or concrete surfaces with using WPC finishing the surfaces even and smooth without using extra cement complete all as specified and directed. Note:- WPC will be measured and paid separately under respective item of this schedule.

M&L for preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer over 1mm thick wall care putty complete all as specified and directed.

M&L for preparation of new undecorated surface of walls and applying three coats of white wash complete all as specified and directed.

Supply and erecting steel tubular pole, swaged, complete with cast iron base plate, finial taper plug, bolts, nuts, washer and screws including painting with two coats of aluminium paint over one coat of red oxide primer on all exposed surfaces and tarring with black bituminous paints to portion embedded in PCC including numbering of poles with two coats of synthetic enamel paints, type 410-SP-31 (9.0 meter long) complete, Including disconnecting and taking out old damage Steel/PCC pole all as directed. Note : Excavation & Earth work and PCC foundation/base shall be measured and paid separately under relevant items of this BoQ.

M & L for Cross arms, bracing, supports, clamps and back plate, fabricated from structural steel section including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as directed including two coats of synthetic enamel paint over a coat of red oxide primer, complete all as directed .

M&L for XLPE insulated GI wire/Strip armoured Electric power cable (Heavy duty) with stranded Aluminium conductor 1100 Volts grade, cross sectional area 10Sqmm 2 core laid in trench/pole/on wall completer all as specified and directed.

M&L for XLPE insulated GI wire/Strip armoured Electric power cable (Heavy duty) with stranded Aluminium conductor 1100 Volts grade, cross sectional area 16Sqmm 4 core laid in trench/pole/on wall completer all as specified and directed.

M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLSH multi stranded conductor cable in and including Concealed PVC conduit of size 20/25mm ISI marked inclusive of tees ,bend ,elbows etc upto and including sunk in Anodized pressed steel box for housing switch socket etc with white laminated 3 mm thick sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal incl cutting, chasses and making good disturbed surface to match with existing finish with plaster for complete all as specified and directed.

One light point controlled by one, one way switch 5 Amps

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

Description all as per item No 60.00 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 1.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

Supply and fixing switch piano flush button single pole one way 5 amps, AC 240 Volts complete all as specified and directed.

Supply and fixing switch piano flush button single pole one way 15 Amps AC 240 volt complete all as specified and directed.

Supply and fixing socket outlet flush type 5 Amps, 5 pin, AC 240 Volts complete all as specified and directed.

Supply and fixing socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amps, AC 240 volts complete all as specified and directed.

S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified

S & F for stepped type electronic fan regulator flush type complete all as specified

Supply and fixing double door SPN DBs 8 way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed.

S & F for MCB Single pole and neutral rated capacity 40-63 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Supply and fixing LED tube light batten box type made of CRCA sheet with decorative end caps suitable with ultra bridght glass LED tube light 1x 18/20 watt T8 type single side connection complete with both end bi-pin holder and all accessories internally prewired and fixed to wall/ceiling incl fittings accessories and connecting up with twin core flexible copper conductor cable suitable size all as specified.

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source (100 lm/watt) with LDR sensor for automatic ON/OFF operation and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements and provision of 1.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as specified and directed.

Supply and fixing BLDC ceiling fans 1200 mm sweep 230 volts 50 Hz, 5 star BEE rated with brushless direct current motor (BLDC), energy saving, 100 % copper wound motor complete with anti corrosive alluminium blades of minimum thickness 1.10 mm, powder coated finished, double ball bearing maxmium wattage 26 to 32 watts, Min air delivery 220 (+/- 2%) CFM with service value above 6.50, ISI marked complete all as specified and as directed .

M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

M&L for earthing complete with galvanised earth plate electrode 60 cm x 60 cm x 6mm thick burried directly in ground (earth pit not less than 2.25 mtr below normal ground level with top edge of the plate not less than 1.50 mtr below normal ground level connected to galvanised iron earth strip 32x6mm by means of bolts, nuts and washers and check nuts of galvanised iron or steel GI earth strip protected by 40 mm medium grade galvanised iron pipe including of 20 mm dia medium grade GI water tubing sheet metal 4mm wire mash funnel, charcoal or coke and common salt in paint and testing on completion all as shown on electrical plate No.3 of SSR Part-I. including taking out unserviceable one and necessary earthwork complete all as specified and directed.

Supply and fixing LED flood light 200 watt with lens 230V AC outdoor type with thermal management in multiple optics and equipped with silicon gasket for IP 66 (no glue) protection flood light shall be made up of pressure die cast alluminium with toughened glass and high power LEDs and secondary lenses with IP 66 protections (of any one of manufacturers of LED) back opening for separate driver compartment with frame, brand, logo embossed, avarage life class of 50000 hrs metal body fully coated phase protection at 440V upto 4 hours and > 300 V auto cut and restart features. Luminareis and driver shall be of same make to avoid any disputes and service issues later all as specified and directed.

Suppy and fixing LED flood light 120 watt with lens 230V AC outdoor type with thermal management in multiple optics and equipped with silicon gasket for IP-66 (no glue) protectiuon. Flood light shall be made up pressure die cast alluminium with toughened galss and high power LEDs and seconday lenses with IP 66 protection (of any one manufacturers of LEDs) back opening for separate driver compartment with frame, brand, logo embossed, avarage life class of 50000 hrs metal body fully coated phase protection at 440V upto 4 hours and > 300 V auto cut and restart features. Luminareis and driver shall be of same make to avoid any disputes and service issues later all as specified and directed. connecting up with through metallic conduit including fixing acessories i.e clamp (Flat iron 40x6mm), nut, bolts along the pole all as specified & directed.

Labour for drilling hole under the road with the help of bocki/ by manual or by machine for crossing GI tubing of any size 100mm pipe for cable protection all as specified and driected.

Supply & fixing LED street light 25 watt 5700K with silicon gasket for IP-66 (no glue) protectiuon suitable upto 40mm OD holder fixed on existing poles/walls.LED building security light shall be made upto pressure die cast alluminium LM alliy housing with toughened glass and high power LEDs and secondary lenses with IP 66 protection (of any one manufacturers of LEDs), top opening for seperate driver compartment with frame, brand, logo embossed, toughened glass cover. High power ceramic base, CRI>70, and bolted inside the liminarie panel. Average life class of 50000 hrs metal body fully coated phase to phase protection at 440V upto 4 hours and >300 V auto cut and restart feature. Luminaries and driver shall be of same make to avoid any disputes and service issue later, lights are connecting up with twin core flexible copper conductor cable all as directed and specified.

Supply,laying & fixing double wall corrugated (DWC) pipes of size 63 mm outer dia and 50 mm inner dia conforming to IS 16205 (Part-24) including all accessories i.e. all type of joints, Sockets, Elbows, bends and End caps etc all as specified and directed by GE.

M & L for street light bracket made out of GI pipe light grade 40 mm dia 1.5 metre length bent to shape and reduced to required size at top upto 1.5 metre length by cutting, welding and well finishing including MS clamp of flat iron of size 40x6 suitable length 2 sets complete with drilling, hole, fixing with nuts bolts and washers including painted with two coats of aluminium paints over a coat of red oxide primer including dismantling of old unserviciable one complete all as specified and as directed.

Supply and fixing pole mounted SMC junction box/bus bar chamber for loop IN/OUT connection of street light cable of size 295x195x100 mm high heat distoration temperature, non-fusing , shockproff, rustproof, 100 % weatherproof, fire retardant- class FV-O as per IS 11731 Part-II and suitable locking arragement with three phase and neutral aluminium busbar of size 20X3 mm of length 170 mm wrapped with PVC sleeves with maintained the colour code, MCB DIn rail channel for mouting of one no MCB SP and provision of making holes with GI nuts, bolts & washers for cable connections mounted on hydrograpic insulators with nuts & bolts at both ends of busbar and fixed on pole steel/PCC with suitable two nos flat iron clamp 25x4 mm with nuts and bolts (duly painted with two coats of aluminium paint over a coat of red oxide primer) and dismantling of old unserviceable one complete all as specified and as directed.complete all as specified and directed.

Supply and fixing PVC Sheathed multi stranded unarmed copper conductor cable LT 1100 volt grade Conforming to IS 7098 FRLS (inner sheet) of size 1.5 Sqmm 3 Core (Nominal Area) from pole junction box to light fitting with suitable size copper cable lugs and connector all complete as specified and directed.

Supply, Errection, Installation, Commissioning & Testing of 16 Metre High Mast lightning System (Material construction of high mast sheet shall be of BSEN 10025 / lS 5986 Gr Fe 510 or equivatent).Mast shall be in two sections, hot dip galvanized and suitable for wind velocity as per IS 875 Part 3, 3 point suspention system. It shall also include foundation as per manufacturer drawing. The scope of work shall also be deemed to include the following:-

(a) Galvanised Lantern carriage arrangement siutalbe for 8 luminaires symmetrically & Its control gear boxs and lightning finial and with 03 point suspension system. (b) LED floodlight luminaire including all accesories, silicon filled driver IP-66 protection, driver must have BIS registered of cat part No LFLN-200-CDL/60M of CROMPTON. (c) Double drum winch motor and manual method of operation tested load drum 500 Kgs. (d) Stainless steel wire rope 6 mm dia 7/19 construction conforming to AISI-316 grade. (e) The mast shall have an integral power tool 1.5 HP 1400 RPM single speed Reversible 415 Volt, installed inside the base compartment for its operation. (f) 02 Nos LED type Aviation obstruction light. (g) Service Wiring feeder to flood light with multistranded copper conductor cable with double run for one standby cable. (h) Design, costing of suitable RCC foundation with Concrete grade for high mast considering SBC of soil as 10 T/Sqm (after cutting of concret & bituminus road and incl bolts manufactured from special steel along with nuts, washers, anchor plates and templates etc. and including PCC (1:2:4) for panel grounting, complete all as per manufacturer's instractions subject to approval of the GE.

(j) Supply, installing, testing and commissioning, factory made and tested, LT feeder pillar box, outdoor type (CPRI approved) .The panel shall be dust and vermin proof, IP 65 class protection and made out of 3.15mm CRCA MS sheet and 40x40x4mm thick angle iron frame work, powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside, double door openable type, with aprons for cable entry, internal wiring with PVC insulated, stranded copper conductor, FRLS cables, IS-694 marked of adequate size but not less than 10 Sq mm. 2 Nos danger notice plate made of 1.6 mm thick mild steel sheet, vitreous enamelled white of size 25 x 20 cm with letters, figures and conventional skull bones in signal red colour shall be fixed to the pillar box with appropriate size nuts, bolts and washers etc indicating the voltage and danger in Hindi and English complete all as specified and directed. The following items/ accessories shall also be deemed to be incuded and accomdated in the above panel:-

(i) Stag type,4 way terminal(I/P) 63 Amps - 1 No (PCB 150 ACBC) (ii) MCCB, 63 Amps, 4 pole, 25KA, 415V - 1No (iii) Contactor 3pole, 63 Amps -1 No (iv) Toggle Switch 6Amps - 1 No (v) Timer (analogue) (vi) Stag type, 4way terminal (O/P) 63A - 1 No (PCB 150 ACBC) (vii) Over load relay 2/3.5A - 1 No (viii) F. contactor 9A - 1No (ix) R. contactor 9A - 1No (x) Motor terminal 32Amps -1 No ((xi) Push switch terminal-1No (xii) Push switch (F/R) STD - 1 No.

Notes : - (aa) Work shall be executed as per standard engineering practice and as per manufacturers instructions. (ab) Before placing the order, the design/ drawing of high mast of the manufacturer shall be got approved from GE. (ac) The contractor shall get the work executed from the manufacturer or their authhorized rep. (ad) Size/type of RCC foundation Shall be carried out as per manufacturer's drawings subject to approval of GE. (ae) Unit rate inclusives of 20 mtrs. High Mast Tower suitable for 8 Luminaries, 20 mtrs. LED flood light luminaires, High Mast assecories, Mechanical Components including Head Frame & Pully Assay, Winch Bracket, Lantern Carriage Ring including control gear box Mtg arms for luminaires, Resting Bracket Guide Ring, Compensating Disc, Lightening Arrestor etc , Wire Rope , D Suckel clamps , Nuts and bolts , cable Foundation Accessories , Winch Assembly , Termination & distribution box, Power Tool, Feeder Pillar Box, Civil foundation with materials, excavation and erection, LED Aviation light (af) Any item missed out above but is technically required for safe and proper installation and operation of High Mast shall be deemed to be included in the quoted rate all as directed by the GE.

Horizontal boring using ultra sound technique/any other suitable mechanical means at approx 1 metre below the road pavement, hardstanding etc without damaging the existing surfaces getting out & disposal of soil to a distance not exceeding 50 metre from the site of work complete all as specified and directed.

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 53400.00 (refer Tender Srl Page No 26). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

PRADIP KUMAR BOSE (BID ID -3362803)

M/S G D CONSTRUCTION (BID ID -3363315)

GAYATRI BUIDERS (BID ID -3362812)

UNIVERSAL CONSTRUCTION (BID ID -3362748)

M/S KAR CONSTRUCTION (BID ID -3362810)

M/S UTTAM ENTERPRISES (BID ID -3362858)