Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹6.9 LAccepted-AOC B6 BIYANI NAGAR PHASE 2 NEAR ST WORKSHOP TUKUM CHANDRAPUR MAHARASHTRA 442401 | CHANDRAPUR | MAHARASHTRA | 442401 | L-1 | Accepted-AOC Lowest qualified bidder. Hence being awarded. |
Tender Value
₹7.8 L
EMD Value
₹9,700
Closing Date
9 Dec 2023, 3:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri.Nitin Naik
OFFICE OF THE AREA GENERAL MANAGER WCL BALLARPUR AREA P.O. SASTI TA. RAJURA DIST. CHANDRAPUR (MS) PIN 442905
Providing Ozonation arrangement for improving water quality in Gouri Township under Gouri Sub Area
2023_WCL_294566_1
wcl-ba3650-civ-e134-23-24/727
Open Tender
Civil Works - Others
Item Rate
90 days
WCL BALLARPUR AREA
AS PER NIT
4 documents required · 4 mandatory
₹9,700
14 Jan 2024
25 Nov 2023
11 Dec 2023
25 Nov 2023
9 Dec 2023
25 Nov 2023
25 Nov 2023 - 2 Dec 2023
Amount
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil.
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 20 mm nominal size derived from natural sources
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, ifnishing and reinforcement- All work up to plinth level : 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).
Centering and shuttering including strutting, propping etc.and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
Centering and shuttering including strutting, propping etc. and removal of form forLintels, beams, plinth beams, girders, bressumers and cantilevers
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
Brick work with fly ash bricks in foundation and plinth in cement morter 1:6 ( 1 cement : 6 coarse sand)
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or urved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve Thermo-Mechanically Treated bars of grade Fe-500D or more.
12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand)
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqmover and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at The junctions and corners, all necessary fittings complete,including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work
Supply, installation and commissioning of 100 gm/hr ozonator system with 10 lpm oxygen concentrator and suitable pump etc. complete as per detailed specification sheet enclosed as per direction of Engineer-in-charge OZONE GENERATOR TYPE 100Gm/Hr Water Cooled In S.S. WORKING CAPACITY 100Gm/Hr. Approximate From 90% Pure Oxygen Feed MAXIMUM OZONE OUTPUT 100Gm/Hr. Approximate From 90% Pure Oxygen Feed OZONE CONCENTRATION 8 %w/w HEAT DISSIPATION 45° Each Electrode TYPE Corona Discharge CELL MOC 600mm Long X 48mm Od, SS Water Cooled NO.OF CELLS 25 Gph * 4Nos MOTHER BOARD 220VAC, 4Nos High Voltage Independent Circuit For Each Cell. INSTRUMENTS Ampere Meter, Flow Meter, Volt Led, Digital Timer SAFETY MEASURES Main Fuse, Door Switch SIZE(APPROX) 1000mm H X 350mm D X 950mm W Approximate DRY AIR/OXYGEN FLOW 90% Pure Oxygen At 10 LPM Flow OZONE OUT FLEXIBLE TUBE 10X6 Mm Silicon Tube ,5 Meter Long SUPPLY FUSE 3Nos 3 Amp In Each Circuits OZONE INJECTION Through 1’ SS 316 Venturi And NRV. ELECTRODE COOLING Water Circulation with Pu Pipe & Connections. POWER 230 V ac Supply, 50Hz. Warranty has to be provided for a minimum period of 1 year from the date of commissioning of plant.
Total impact of GST for the purpose of CTC
stage.html
html • 0.03 MB
techsummary_305103.pdf
PDF • 0.40 MB
finsummary_305103.pdf
PDF • 1.26 MB
Awarde134.pdf
PDF • 2.31 MB
BOQ Comparative Chart
xlsx • 0.01 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .