SUPPLY OF CEM LAB EQUIPMENTS FOR MODROB PROJECT

Sequential operation of two double acting cylinders- • Double acting cylinder – 2 Nos. • Limit switch – 4 Nos. • Magnetic switch- 2 Nos. • Mini Compressor-1No. • Double Acting solenoid valve – 2 Nos. • Interface suitable for PLC & SCADA

Heater control with PID function • 1000W Electric Kettle – 1 No. • RTD Probe / temperature sensor – 1 no. • A 1000 W water heater is controlled using the PID function of the PLC. • The temperature transducer is a temperature transmitter with 4 to 20 mA output and Pt 100 Probe • Interface suitable for PLC & SCADA

Round table liquid filling system • One proximity sensor to detect the bottle presence • A mechanical base fixed with stepper motor and gear mechanism provided to hold 4 bottles and rotate in circular motion • A tank is provided to store the liquid • One solenoid valve to control the volume of liquid flow into the bottle • One reservoir tank with FHP pump to feed the water to supply tank • Two magnetic switches provided to maintain the level of water in supply tank. • Interface suitable for PLC & SCADA

Speed control of low speed motor using PWM function • 12V DC,18W PMDC Motor – 1No. • Encode setup – 1 No. • Slow speed 12V DC 18W permanent magnet motor with fly wheel is controlled with the PWM output and feedback from a low resolution encoder. • Interface suitable for PLC & SCADA

SCADA Trainer Kit • Stable industrial communication, seamless integration with Delta PLC & other products • VB Script language support • Reliable user authority management • I/O points : 64 • Licensing via USB hardware key to enable all authorizations

Advanced PLC Trainer (Analog and digital) • +24V Power supply & USB Port from PLC • 32-bit CPU for high-speed processing • Program capacity: 16 k steps • Data register: 10 k words • Execution speed: LD: 0.35μs, MOV: 3.4μs • Built-in 2 analog inputs / 2 analog outputs. • Built-in 4 Digital input/2 digital outputs. • Built-in mini USB, RS-232 and RS-485 ports (Master/Slave) • Supports standard MODBUS ASCII / RTU protocol and PLC Link function • PID Auto Tuning function for highly efficient PID control • No battery required; RTC function operates for at least one week after power off (hardware version 2.0 and above) • Supports DVP-S Series modules (left-side and right-side) Motion Control Functions • 4 points of high-speed pulse output: 100 kHz / 2 points, 10 kHz / 2 points • 8 points of high-speed pulse input: 100 kHz / 2 points, 10 kHz / 6 points

Laptop Computer • Intel Core i3 Processor, 10 Generation • 8GB DDR4 RAM • 1TB HDD, Clock Speed minimum 1.2GHz • 2XUSB 3.1, 1XUSB 2.0, 1XHDMI port • 3 in I Card Reader • 14 Inch HD LED Backlit Anti Glare Display • Build in dual speakers & microphone • Wireless Lan IEEE 802.11ac • Bluetooth-V5.0 • Dimensions-340x240x20mm & Weight-1.7Kg(max) • HD webcam • Li-ion Battery • Windows 10 OS • Microsoft office home 2019

Personal Computers • Intel Core i3 Processor, 10 Generation • 8GB DDR4 RAM • 1TB HDD, 256GB SSD capacity • Processor speed 3.6GHz • 2XUSB 3.1, 1XUSB 2.0, 1XHDMI port • 3 in I Card Reader • 14 Inch HD LED Backlit Anti Glare Display • Build in dual speakers & microphone • Wireless Lan IEEE 802.11ac • Windows 10 OS • Microsoft office home 2019

Variable Frequency Drive Trainer Single Phase input Three phase Output • Input Single Phase 220V AC • 3 Phase Output. • Frequency Variable 0-50Hz • Capacity: 1HP .

Delta PLC Trainer (Digital I/O) • 32-bit CPU for high-speed processing • I/O: 8/6 points • Program capacity: 8 k steps • Data register: 5 k words • Execution speed: LD: 0.35μs, MOV: 3.4μs • Built-in RS-232 and RS-485 ports(Master/Slave) • Supports standard MODBUS ASCII / RTU protocol and PLC Link function Motion Control Functions • 4 points of 10 kHz pulse output • 8 points of high-speed counters: 20kHz / 4 points, 10 kHz / 4 points

Detal PLC Trainer Analog and Digital I/O • +24V Power supply & USB Port from PLC • 32-bit CPU for high-speed processing • Program capacity: 16 k steps • Data register: 10 k words • Execution speed: LD: 0.35μs, MOV: 3.4μs • Built-in 2 analog inputs / 2 analog outputs & digital 4 inputs / 2 outputs • Built-in mini USB, RS-232 and RS-485 ports (Master/Slave) • Supports standard MODBUS ASCII / RTU protocol and PLC Link function • PID Auto Tuning function for highly efficient PID control • No battery required; RTC function operates for at least one week after power off (hardware version 2.0 and above) • Supports DVP-S Series modules (left- side and right-side) Motion Control Functions • 4 points of high-speed pulse output: 100 kHz / 2 points, 10 kHz / 2 points • 8 points of high-speed pulse input: 100 kHz / 2 points, 10 kHz / 6 p

Switches Interfacing kit • 8 Input • 8 Output LED. with Relay Output • Powersupply : 24V

DOL Starter with Singe Phasing Preventer Interfacing kit • 1 No. 3 Phase 16A Main Contactor • 2 Transformers and 2 relays to deduct the phase failure • 3 switches to test the phase failure • Proper termination for 3 HP cage motor • Screen Printed Board, MS tube stands • Interface suitable for PLC & SCADA

EB to Generator Changeover kit • Input 1 Phase, 230V • Output: 1 Phase, 230V • Contactor 230V, 9A – 2 Nos. • Start & stop push button switch • EB to Generator change over switch implementation with interlocking system • Interface suitable for PLC & SCADA

PLC based Star Delta Starter • Output power suitable for 5 HP Motor • 1 No. 3 phase 9A Main Contactor, 8A Overload relay • 3 Nos. of Contactor (Main – 1, Star – 1, Delta – 1) • Start and Stop Push Buttons, Fuses and Power wiring termination • Control wiring termination, Powder Coated MS Stands, Acrylic back cover • Interface suitable for PLC & SCADA

Automatic Load Transfer Kit • Input: 3 Phase • Output: 1 Phase • Relay: 24V Contactor, 230V/9Amps-3Nos • Indicator for Input & Output • Interface suitable for PLC & SCADA

Automatic Tank Filling Operations using PLC • Tank Size: 300 X 200 X 200mm • Sump Size: 400 X 300 X 220mm • ½ Inch, 24V Solenoid valve - 1 No. • 5V Water Pump Motor - 1 No. • Float Switch – 2 Nos. • Interface suitable for PLC & SCADA

Automatic Fire Alarm System • Smoke detector – 4 Nos. • +24V Power supply • Buzzer - 1 No. • Multiple alarms - 4 Channel fire Alarm • Sound alarm • If not acknowledged, Sound alarms 1 and 2 • Interface suitable for PLC & SCADA

Automatic Lift Control interfacing module • 3 floors (Ground plus two floors) Plastic model • Floor request switches and Floor sensing switches • Cabin - stepper motor with controller with forward and reverse control. • Proper termination to wire inputs and outputs. • Interface suitable for PLC & SCADA

Traffic Light control Interfacing module • 4 Nos. of Green LED for moving • 4 Nos. of Red LED for stop • 4 Nos. of yellow LED for ready to start • Interface suitable for PLC & SCADA

Automatic operation of double acting pneumatic cylinder multi cycle • Double acting cylinder – 1 No. • Limit switch – 2 Nos. • +24V Power supply • Double Acting solenoid valve – 1 No. • Interface suitable for PLC & SCADA

Inverter Duty Motor • 3 Phase 440V. • Capacity: 1HP • Foot Mounting • Speed 1440 RPM . • Suitable for VFD Drive

Mighty Electronics Equipments Coporation

SMMICRROSYSTEM

Vi Microsystems Pvt Ltd

JAYAM ELECTRONICS

Sofeel Marketing and Technical Services Pvt. Ltd.

BETA SCIENTIFIC EQUIPMENTS

LOYALTY AUTOMATION PVT LTD

BESTMACH

NiYo Engineers

ANSHUMAN Tech Pvt. Ltd.