PROVISION OF OVERHEAD WATER TANK WITH STAGING IN JCOS ORS MD ACCN AT ALLENBY LINE OF 3 TRG BN UNDER GE NORTH SECUNDERABAD

Amount

Excavation in trenches not exceding 1.5m wide and not exceding 1.5m in depth for fdn etc for laying of drain pipes etc & for manholes etc not exceding 10 Sqm on plan and not exceeding 10 m in depth and getting out in hard/dense soil complete all as specified and as directed.

M&L plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and as directed.

M&L for brickwork with fly ash modular size bricks straight or curved on plan exceding 6mtr mean radius in CM1:6 complete all as specified and as directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 complete all as specified and as directed.

S&F rotational moulded polythylene water storage tanks triple layered (cylindrical vertical with closed top) of 500 litres capacity complete all as specified and as directed.

S&F for 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm - 10 gms) complete all as specified and as directed.

S&F for 20mm gun metal, globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F 15mm bore galvanized steel tubes, medium grade, fixed to walls and ceilings or laid in floors complete all as specified and as directed.

S&F Tubes, ‘medium grade’ galvanised, 20 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

Cutting holes into or through brick/ stone walls built in cement mortar of superficial area not exceding 150 Sq.cm and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

S&F in Low level flushing cistern 10 ltr capacity, PVC incl waste pipe, down take pipe, pair of CI brackets and all accessories complete all as specified and as directed.

S&F in CP angle/stop cock 15mm bore fancy type chromium plated with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in CP bib tap 15mm bore fancy type with crutch or butterfly handle, screwed for iron pipe or for unions and fixed complete all as specified and directed.

S&F in chromium plated shower roses 125mm size with or without swivel joint including fixing to steel pipe or union etc complete all as specified and directed.

S&F 15mm size PVC connection with PTMT nuts 450mm length complete all as specified and directed.

S&F in low density polyethene pipes (LDPE) 32mm of pressure rating 6 Kg/cm2 fixed to walls or laid in floors etc complete all as specified and directed.

M&L preparation of new plastered surfaces of wall and applying three coat of white wash complete all as specified and as directed.

M&L reinforced cement concrete(nominal mix) type B1 1:2:4 (using 20 mm graded aggregate) as in slab supported on walls, beams and columns in floors,roof, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs,etc also splays between floors and beams etc as in rough finished flat surfaces of concrete complete all as specified and as directed.

M&L for mild steel TMT bars 5mm dia and over including all cutting bending, binding, cranking placing & binding with MS wire (annealed) not less than 0.90mm dia complete all as specified and as directed.

Returning filling incl spreading, levelling, watering and well ramming in layers not exceding 25cm in each layers hard/dense soil complete all as specified and as directed.

Removal of excavated material soil to a distance not exceeding 50m and depositing where as directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed

Supply and fix in repairs stainless steel sink overall size 915mmx460mm with bowl size 410mmx330mmx160mm with draining board made out of stainless steel 1 mm thick for kitchen with plugs, washers and waste pipe including cast iron cantilever brackets and connecting to union / pipe complete all as specified and as directed

M & L for Drilling and tapping cast iron / GI water mains (in position) for branch connections of the internal dia 20mm complete all as specified and as directed

S&F in vitreous china wash basin, white, flat back, size 580mm X 450mm including CI brackets, 32mm dia brass chromium plated waste fittings with long screwed shanks and fly nuts flanged end bedded in red lead cement and other end fixed with & including cutting for & pinning in end of brackets and 15mm bore pillar tap, cast copper alloy fancy type chromium plated, screwed down high pressure complete all as specified and as directed.

S&F in repairs stainless steel kitchen plate rack of size 90cm x120cm x 1mm thick (18 gauge) conforming to the sample kept in the office of the AGE B/R I complete all as specified and as directed.

S&F Towel Rail, 600mm long of Brass chromimum plated D Type fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and as directed.

S&F in repairs 15mm size PVC connection with PTMT nuts 450mm length complete all as specified and directed.

S&F PVC (SWR) Nahani /Floor trap, 75 mm dia of out let, plain with grating including jointing to waste pipe with solvent and cement concrete type B1 (1:2:4) & including removing old trap and fixing of stainless steel grating in ground shape etc complete all as specified and as directed.

M/s GM Constructions

M Shyam Sunder

R G NAIDU CIVIL CONTRACTOR AND BUILDERS

ASHOK CONSTRUCTION

M/s D.Krishna Varma