Installation of Drinking Water Supply at Siddinathpur Durga Mandir ID-628 AC-126146852 under 15th FC Tied Grant for the year 2024-25 during 2025-26.

Odex : Providing installation and commissioning of 150x150 mm dia DTW by Odex boring within the jurisdiction of different PHE divisions including including preparation of site for placing of drilling rig, air compressor, transportation of rig and ancillary equipments. Construction of temporary accommodation and low cost sanitary facility for drilling staff and providing water supply facilities at drilling site. Drilling of bore well by using drilling rig having ODEX system Extraction of drilling pipes / bits against skin friction at the end of each day and after completion of the operation including washing of the bore hole all complete as directed and lowering / sinking of well assembly including welding of pipe joints. Developing of the D.T.W. with air compressor, Make- Kirloskar / Cumins all complete as directed by the department.

Supplying, installation, testing and commissioning of Raw water submerssible pump set of different capacity at various Electric Control Panel Board made of MS Sheet duly painted with Anti-corrosive paints complete fitted with all electrical accessories i.e. Off On Switch, Voltmeter, Ameter, Indicator light etc., bright Annealed Electrolytic Bar Copper Conducted PVC insulated sheathed round flexible 3-core Cable of the Motor Manufactured conforming to IS:694/1990 all complete as specified and directed by the Department with One year warranty from the date of commissioning and satisfactory testing against any manufacturing defect. [If any such defect is found during the year from the date of installation and satisfactory testing, supplier will have to rectify the defect at their cost and risk & if necessary replace the pump set. Discharge of the pump - 22.7 LPM Design Head - 56 M Recommended make:- Crompton Greaves/ Aquatic/ CRI/ GEC/ ALSTHOM/ V- Guard or equivalent

Supplying, laying , fitting & fixing GI (Medium Class) Pipe conforming to IS-1239 (pt-I) 2004 (Ammended 2010) including GI specials and jointing material, cutting of pipe materials and necessary earthwork in trenching and refilling of earth and restore to its original condition including dressing, dewatering incuding bailing out water where necessary all complete and also necessary testings and commissioning as per direction of the department.

Construction of RCC Overhead Reservoir with Sintex (Capacity with 2x5000 Ltrs)-12M Staging including.

Supplying, installation, testing and commissioning of Centrifugal pump set of different capacity at various PWSS under different divisions of the state Supplying, installation, fitting & fixing, testing and commissioning of Electric driven 3-phase (for 5HP/ .5HP/10HP/12.5HP) / Single phase (for 1 HP / 2HP/ 3 HP pump) Centrifugal pump set of approved make with bronze impeller of suitable diameter with G.I. suction pipe, suction strainer, non-return valve, delivery piping up to sluice valve all complete. The pump set should be coupled with electric motor drive of adequate power suitable for operation at 230V / 415 V, 50 Hz input power with DOL Starter /Star delta Starter including Electric Control panel board enclosure made of MS Sheet duly painted with Anti-corrosive paints complete, fitted with all electrical accessories Discharge of the pump - 26 LPM 2 HP -Centrifugal type Pumpset.

Supplying, laying , fitting & fixing HDPE pipes ( High Density poly ethylene pipes pE 100 ) conforming to IS 4984/2016 (with up to date amendament) with necessary jointing material like mechanical connector of jointing pipes by heating the ends of pipes with help of teflon coated electric mirror / heater to the required temperature and then pressing the ends together against each other to form a monolitic and leak proof joint by thermosetting process. it may be required to be done with jack/ hydraulic jacks/butt fusion machine . (50mm & above fusion jointed & below 50mm mechanical jointed). the HDPE fitting should be ISI marked conforming to relevant BIS code. 90mm Dia HDPE.

Construction of Functional Household Tap Connection including earthwork in excavation for pipe line (both for connection in distribution line and service connection) and refilling, dressing etc. Providing tegrated Saddle piece with flow control valves (SS- FCV and fasteners) of size 90 MM X 15 MM outlet (I.e. ranging from 63mm to 160mm) making holes in the distribution pipe, Flow control valve of SS31G (integraled with saddle piece) with flow of 3 - 5 LPM at standard operating pressure of 0.5 bar to 1.5 bar, connecting it to the saddle piece, providing and iixing 3 layer (Outer green / GREY coloured UV Stabilised, middle black coloured UV Slabilised and inermost layer white coloured with antimicrobial property) Fusion welded PP-R (Poly propylene-random copolymer) Pipes, SDR 7.4 having thermal slabilily for hot and cold water supply conforming IS 15801-2008 of average lenglh 10 m from saddle piece lo the standpost ( pipes ol make empanelled manufacturers and PN- 16 Pipe,20 mm OD,SDR-7.4) including all plain PP-R fitfings and brass threaded PP-R fitting and clamping, cutting and making good to the damages, including all taxes and duties as applicable and including the cost of all required labour and materials as directed and specified. The item also inludes construction and installation of Cement Concrète Hydrant Pillar with cement concrète in proposrtion 1:3:6 sheathed in SWR pipe of dia 110mm height 1200 mm encasing 15 mm dia PPR pipe inside the hydrant, inclusive of cost of transportation to site and also supplying fitting and fixing C.P. Brass Bib cock conforming to IS:8931 all complexe as directed and specified. Approved good for construction drawing will be issued by the deptt.

External & Internal Electrification to Raw & Clear water pump house .

Supplying, installation, testing and commissioning of Centrifugal pump set of different capacity at various PWSS under different divisions of the state Supplying, installation, fitting & fixing, testing and commissioning of Electric driven 3-phase (for 5HP/ .5HP/10HP/12.5HP) / Single phase (for 1 HP / 2HP/ 3 HP pump) Centrifugal pump set of approved make with bronze impeller of suitable diameter with G.I. suction pipe, suction strainer, non-return valve, delivery piping up to sluice valve all complete. The pump set should be coupled with electric motor drive of adequate power suitable for operation at 230V / 415 V, 50 Hz input power with DOL Starter /Star delta Starter including Electric Control panel board enclosure made of MS Sheet duly painted with Anti-corrosive paints complete, fitted with all electrical accessories Discharge of the pump - 26 LPM 2 HP -Centrifugal type Pumpset.