Provision of industrial grade Epoxy flooring, rolling shutters, SS netting, grating to storm water drainage, etc. and repairs/renovation of internal and external wall finishes, valley gutters, sun sheds, roofs transparent sheets, etc. of DK shed buil

S & F Steel rolling shutters 1.25mm laths thickness, without ball bearing, as specified including top cover, anchoring rod, hasp and stapple and one coat of primer errected in position as indicated, complete with gear operated type with bevel gear box and crank handle.

Preparation of new Surfaces of any des-cription, over 10cm in width or girth, including priming with alluminium red oxide and application of Alluminium Paint two coat.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3

S & F structural steel in joist, channel, angle, or tee sections fixed independently, without connecting plates, etc Fe 410-W (Gde-E-250) Quality-A.

Pre- painted galvatume aluminum zinc coating Gl based corrugated steel sheet 0.50mm thick of any colour having tensile

Preparation of new surfaces of steel and application of one coat of red oxide zinc chromate primer and two coats of synthetic enamel painting.

Bands, straps, supports or stays for valley gutter, rainwater, ventilating pipes, including bolts, if required: hooks (staya), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; handmade sliding bolts; champs; hold fasts; wall ties: hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 S & F

Plain, back mild steel sheeting, in rides hips, valley gutters, drip and straight flashings (length and girth as fixed) Labour Only. Thickness in mm 1.25; with welded joints, complete.

Preparation of old surfaces of steel and steel based surfaces of any description over 10 cm width or girth including knoting and stopping and application of Red oxide primer and application of Two coats of synthetic enamel paint conforming to IS 293274 of approved shade and brand all as specified and directed Complete.

Preparation of New surfaces of steel and steel based surfaces of any description over 10 cm width or girth including knoting and stopping, with one coat of red oxide primer and application of two coats of black bituminous paint conforming to IS 9862 -1981all as specified and directed complete.

S/Fixing UPVC Pipes (SCH-40) in rain water pipes with connections as required like bend/ elbow sockets etc jointed with solvent cement 150 mm dia with complete fittings like bend, socket.

Taking down old plaster including raking out joints, hacking for key, scrubbing down with water, etc. M&L for rendering 15 mm thick in CM 1:4 on fair faces of block masonry or concrete surfaces.

Complete removal of old decorated surface of Walls including brooming down, wire brushing, scraping down smoke soot. Moulds, moss, applying of 3mm thick wall care putty on wall and efflorescent salt ,treating oily and greasy spots and application of alkali-resistant priming paint and application of Two Coats of Plastic emulsion paint all as specified and directed complete.

Complete removal of old decorated surface of walls including brooming down, steel wire brushing scraping down smoke soot, mould, moss and efflorescent salt ,loose scales treating oil and greazy spots and Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, AIkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @0.90 litre/ 10 Sqm over new surfaces.

Supply and Fixing of Stainless steel wire .cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.

Supply and Application/Applying of Anti Screeding compound (minimum 3500 micron) with premixed compound of Resin, Hardner (Cycloaliphatic), aggregate (Heavy and normal Silica Powder) in 2:1:8 Ratio with High glossy dry film top coat (minimum 1000 micron) for industrial floor, overall comprehensive strength 775 Kg/SqM with manufacturing test certificate, as directed by Engg-In-Charge.

S & F Fibre glass reingorced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. 2mm thick sheet.

Framed work such as grills, gratings, etc over drain with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters: walk ways; railings; frame work of water tanks and similar work conforming to Fe.290 Gde-E-165 S & F