Repair/renovation of security check post at main gate of ICAR-NRCE, Hisar

12 mm cement plaster: 1:4 (1 cement : 4 fine sand)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distember (ready mix) having VOC content less than 50 grams/litre of approved brand and manufacture to give an even shade: 1 old work (one or more coats)

P/F PVC Wall Pennling of 6-9 mm thick

P/F T ceiling with 8mm tiles (2' x2') with GI grid with fittings False Ceiling

Providing and fixing 1st quality ceramic glazed wall tiles conformig to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) , jointing with grey cement slurry @3.3kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 1 one or more coats on old work

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. ( Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness ( weight not less than 12.50 kg/sqm)

P/F Coloured inter locking C.C. paver block (60 mm thick, M- 35)

Brick work with common burnt clay F.P.S. (non Modular) bricks of class designation 7.5 in foundation and plinth in : 1 cement mortar 1:4 ( 1 cement: 4 coarse sand)

Dismantling and fixing of Door

P/F G.I Sheet including MS pipe 1''x1'' weight 100 kg including all fittings etc.

P/F ISI Hand Wash basin

P/F ISI 1 Urinal Pot with Cistern including all fittings

P/F ISI 1 W. C Toilet Seat including all fittings

P/F ISI 4 Angle Valve

P/F ISI 4 water taps

P/F ISI PVC Water Tank 500 litre including all fittings etc.

P/F CPVC Pipe of Diameter 1"

P/F Screen Mirroring size 2'x3'

P/F PVC Cubboards thickness 18 mm including all fittings, ISI Hinges , ISI Door Handles, 1 No. ISI Door Locks, ISI Channels etc.

P/F Exhaust fan 12"

P/F Tube light LED 48 W

P/F LED Panels 2'x2' , 48W

P/F 6A electric switches modular type

P/F 20A/ electric switches

P/F 6 Pin socket/20 A

P/F 8"*3" PVC Sheet

P/F 8"*3"G. I. Box

P/F 8"x6" G. I. Box

P/F 8"x6" PVC Sheet

P/F 1.5mm single core PVC insulated , copper wire red, black, green (50m each)

P/F 2.5mm, 3 core PVC insulated, copper wire red , black, green

P/F 3 Core, 4mm, PVC insulated, copper wire red, black, green

P/F Iron MCB BOX 12 way

P/F Iron DP box 2 way

P/F 2 pole MCB c-type, 32A, 240 V, 50 Hz , 25 kA

P/F 2 pole MCB c-type, 63A, 240 V, 50 Hz , 25 kA

P/F 16 A , MCB, C- Type (240 V, 50 Hz , 10 kA)

P/F 25 mm (diameter) PVC Pipe

P/F 25 mm (diameter) PVC Pipe Bend

P/F 25 mm (diameter) PVC Pipe Clamp

RP SINGLA AND COMPANY (BID ID -3232874)